"Hidden Line image" calculations VS "Vertical Surfaces" of rooms

Tagy:

Hi!

In "Hidden Line image" (verdeckt-Berechnung) calculation of sections, always the fills of the sectioned "Vertical surfaces" of the rooms (Raum -> seitenbeläge innen) are black.

We know that "Hidden Line image" calculation can be modified after calculation, and then is possible to change the colour of the fill manually.

But, are there any configuration of the "Hidden Line image" calculation of sections to change the fill's colour of the sectioned "vertical surfaces" of the rooms?

Thanks a lot!
Xavier C.A.

Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/

Přílohy (2)

Type: image/png
Staženo 174
Size: 33,47 KiB
Type: application/octet-stream
Staženo 756
Size: 480,21 KiB

what line and color is selected in Options?

Přílohy (1)

Type: image/png
Staženo 194
Size: 109,58 KiB

Hi Numerobis, and thanks to answer! :-)

In "Hidden Line image" calculation of sections, the sectioned "Vertical surfaces" of the rooms show lines and fills. And always the fills of the "Vertical surfaces" are in black, and we can't found any option to change the colour of those fills.

We attach our configuration for the "Hidden Line image" calculations.

Best regards!
Xavier C.A.

Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/

Přílohy (3)

Type: image/png
Staženo 169
Size: 31,32 KiB
Type: image/png
Staženo 161
Size: 131,35 KiB
Type: application/octet-stream
Staženo 773
Size: 448,21 KiB

try to deaktivate the two marked boxes...

and control the color of surfaces...

Přílohy (3)

Type: image/png
Staženo 189
Size: 49,95 KiB
Type: image/png
Staženo 159
Size: 44,73 KiB
Type: image/png
Staženo 168
Size: 90,00 KiB

ich muss jetzt leider auf Deutsch antworten, mit meinem englisch brech ich mir jedes mal was ab

Hab jetzt folgendes herausgefunden (wusste ich auch nicht):
- Die Darstellung der Seitenbeläge hängt davon ab, ob in den Optionen unter Animation die Seitenbeläge angehakt sind... Über die Schnitt - Ausbaudarstellung sind die Seitenbeläge nicht! steuerbar. Das halte ich für falsch...
- Das Filling der Seitenbeläge wird über die Oberfläche beim Ausbau gesteuert...

Přílohy (2)

Type: image/png
Staženo 182
Size: 54,12 KiB
Type: image/png
Staženo 159
Size: 54,96 KiB

Seitenbeläge mit darstellen. Grundsätzlich ja.
Dann muß nur noch gelöst werden wie die Detailausbildung an der Verschneidung Bodenbeläge - Seitenbeläge und Seitenbeläge - Deckenbeläge ausgebildet werden.
Programmiertechnisch ist das unmöglich zu automatisieren, weil mal die Seitenbeläge zum Rohboden gehen und mal zun FFB. Und wenn man dann noch mehrere Schichten hat...

Gruß
Jörg

Software: Allplan, Lumion, OM by Cycot, FM by Cycot, Nevaris...
Coachings unter http://www.cycot.de / Tutorials unter http://www.allplanlernen.de


https://campus.allplan.com/ používá cookies  -  Více informací

Souhlasím