ROOF SLOPES [Solved]


Hello,
I have the problem that I can’t use the command “click edges of the roof frame to apply slopes” on a roof frame. What could be the reason for that?

Onur

Attachments (1)

img
Aufnahme4.jpg
Type: image/jpeg
Downloaded 504 times
Size: 32,56 KiB
1 - 3 (3)
  • 1

Dear Onur,
If you draw two several roof frames one after another with the same plan the command “click edges of the roof frame to apply slopes” won’t work. You have to delete the roof frame and draw it again.

You’ll get 2 roof ridges and a “flat roof” if the upper edge (Z-coordinate) was chosen too small. The roof frame will be capped in that height. Otherwise the roof slopes connect at the highest point. (see pic)

best regards
Undine

Attachments (1)

img
Aufnahme5.jpg
Type: image/jpeg
Downloaded 507 times
Size: 37,63 KiB

Hi Undine

I have understood. Thanks for help. Now I know some more than before.

Onur

1 - 3 (3)
  • 1

https://campus.allplan.com/ uses cookies  -  More information

Accept