[Question] Text leader appears only after moving it


In reinforcement the horizontal text leader does not show up after placing the label.

Attachments (1)

Type: video/mp4
Downloaded 165 times
Size: 1,61 MiB

Show most helpful answer Hide most helpful answer

Too large coordinates, too far from the origin point?

Gruß Jürgen

1 - 9 (9)
  • 1

Too large coordinates, too far from the origin point?

Gruß Jürgen

No, it is definitely not the case.

Attachments (1)

img
Not too large coordinates.PNG
Type: image/png
Downloaded 16 times
Size: 59,21 KiB

da ist etwas weit weg ...

Attachments (1)

img
23-06-_2019_12-21-11.png
Type: image/png
Downloaded 15 times
Size: 82,29 KiB

come on, 136m can not be far

I meen the value after "dl". it shows a value about 466140m an 466km is far.
the value shows the distance between the lastpoint an the aktual position of crosshair.

create something for testing on a new drawingfile at zero.

Sorry, I did not realized your big red arrows in your reply.

But if you look at my first video you can see that the "dl" value does not show the relative distance from the last point clicked.
And the distance between the clicked points is not so large.

And yes I know my part. A have already checked it in an empty drawing file.
It was perfect there, but in the real life project it fails.

The dl: value shows the distance from the global origin.
And this is so big because of the project offset.

Attachments (1)

img
project offset.PNG
Type: image/png
Downloaded 21 times
Size: 13,12 KiB

Quote by Allplan_er
Too large coordinates, too far from the origin point?

Thank you, this was my problem, had a project with very large coordinates

1 - 9 (9)
  • 1

https://campus.allplan.com/ uses cookies  -  More information

Accept