Quality reporter notified us of a crash. In analyzing the data, we found that you can improve the stability of your Allplan installation by installing the current graphics card driver.
You can find the current driver on the homepage of the graphics card manufacturer.
http://www.amd.com/de Support & Driver -> Download driver
http://www.nvidia.de Download driver
Use the driver on the homepage of the manufacturer. Do not use the driver provided by Windows Update.
Notes for notebook users:
It is essential that you install the graphics card drivers provided by the notebook manufacturer! You can find the current drivers on the homepage of the manufacturer.
- If the program still crashes after you have installed the latest graphics card driver, change the graphics mode from OpenGL to GDI+ in Allplan.
Allplan 2012-1 and later:
Start Allplan and select Tools -> Options.
Select Desktop environment -> Display > Hardware acceleration - graphics area: switch off the "Use OpenGL for all viewports" option. Restart Allplan.
From Allplan 2011-1 to Allplan 2012-0-2:
Start the Services application.
Service -> Hotline Tools -> draw -> OK
On = OpenGL mode
Off = GDI+ mode
- You can find information on graphics cards at
Can I run Allplan 2018 on an Apple computer?
Basically, you have two options to run Allplan 2018 on an Apple computer.
1. Allplan 2018 with Parallels Desktop 13
Quality assurance at Allplan tested this option with the following components:
- iMac (end of 2015 or later)
- Intel Core i5, i7 or i9 processor
- 16 GB of RAM
- 50 GB of free hard disk space
- AMD graphics card or NVIDIA graphics card (Note: Parallels does not support OpenGL 3.3. Consequently, Allplan uses GDI+, and the graphics card is labeled as unsuitable by the system test.)
You can also use the following hardware, which was not tested:
- MacBook Pro (end of 2015 or later)
- Intel Core i7, i9
- NVIDIA graphics card
- Mac macOS High Sierra 10.13.1 or later
- Parallels Desktop 13 for Mac
- Windows 10 Pro, 64-bit
- Allplan 2018-0-6 or later
Download PDF FAQ_EN_Running_Allplan_2018_on_an_Apple_computer.pdf...
Please note that running Allplan 2018 on Parallels Desktop 13 is much slower than running Allplan 2018 on a native Windows operating system.
Parallels Desktop 13 supports OpenGL 3.2. Therefore, Allplan 2018 must use the GDI+ mode, which is generally not suitable for architectural data. We do not recommend using this approach. Parallels Desktop 13 is available as a free 30-day version. So, you can test Parallels Desktop 13 for 30 days and see for yourself.
Important note: You cannot activate an Allplan trial license or presentation license with Parallels Desktop 13.
2. Allplan 2018 with Boot Camp
This option has not been tested by quality assurance at Allplan. With Boot Camp, Allplan 2018 runs on a native Windows operating system. Therefore, Allplan 2018 with Boot Camp is faster than Allplan 2018 with Parallels Desktop 13.
Make sure you use current hardware and software (Mac macOS High Sierra 10.13.1 or later).
We do not provide support for this installation.
You can find the software requirements and hardware requirements for Allplan 2018 on this page: