[Question] 2D Bild in 3D umwandeln bzw. in 3D Gebäude einfügen [Solved]

Tags:

Hallöchen

Und zwar möchte ich ein Wappen in 3D wandeln, falls das geht. Ich bin aber bis jetzt an allem gescheitert.
Das Wappen soll neben die 3D Schrift auf die Überdachung unseres Rathauses.
Ich habe versucht einen 3D Körper zu konstruieren und das Bild dann als Oberfläche auf zu bringen. Funktioniert nicht so gut. Als normales Bild es einfach nur kurz einzublenden funktioniert auch nicht
Leider ist auf dem Rechner kein Photoshop drauf.
Wie ist denn nun die ganze Sache zu meistern? Geht das überhaupt?

Grüße

Natasa Katanic

Attachments (1)

Type: image/png
Downloaded 46 times
Size: 86,95 KiB

Show solution Hide solution

Hello,

I used Inkscape to vectorize your picture.
I saved it as DXF and imported it into Allplan.
You'll find the result as attached file.
I hope this could help you...
___________

Ich habe Inkscape verwendet, um Ihr Bild zu vektorisieren.
Ich habe es als DXF gespeichert und in Allplan importiert.
Sie finden das Ergebnis als angehängte Datei.
Ich hoffe das könnte dir helfen...


Attachments (2)

Type: application/octet-stream
Downloaded 785 times
Size: 1,38 MiB
Type: image/png
Downloaded 64 times
Size: 103,13 KiB
1 - 10 (11)

Hello,

I used Inkscape to vectorize your picture.
I saved it as DXF and imported it into Allplan.
You'll find the result as attached file.
I hope this could help you...
___________

Ich habe Inkscape verwendet, um Ihr Bild zu vektorisieren.
Ich habe es als DXF gespeichert und in Allplan importiert.
Sie finden das Ergebnis als angehängte Datei.
Ich hoffe das könnte dir helfen...


Attachments (2)

Type: application/octet-stream
Downloaded 785 times
Size: 1,38 MiB
Type: image/png
Downloaded 64 times
Size: 103,13 KiB

Genial!! Vielen vielen lieben Dank!

Natasa Katanic

Ohje. Mir hat sich jetzt diese Problem aufgetan.

Grüße

Natasa Katanic

Attachments (1)

Type: image/png
Downloaded 46 times
Size: 20,36 KiB

You're welcome!
The result contains a lot of segments but you can surely clean up the drawing to keep only what you need.
Good luck!
___________

Bitte!
Das Ergebnis enthält viele Segmente, aber Sie können die Zeichnung sicher bereinigen, um nur das zu behalten, was Sie benötigen.
Viel Glück!


Yes, it's clear that this method is not perfect. It comes from a pixel image. Then the result must be checked and improved "by hand".
___________

Ja, es ist klar, dass diese Methode nicht perfekt ist. Es kommt von einem Pixelbild. Dann muss das Ergebnis "von Hand" überprüft und verbessert werden.


moin,

habe mal das wappen als 3d Scheibe (körper mit kontur des wappens)mit der oberfläche des wappens erstellt.

die zip-datei importieren sieh anhang

The Blues is the roots, everything else is the fruits. Willie Dixon

Attachments (3)

Type: image/jpeg
Downloaded 62 times
Size: 153,79 KiB
Type: application/zip
Downloaded 709 times
Size: 90,50 KiB
Type: image/jpeg
Downloaded 91 times
Size: 805,72 KiB

Hallo,

das ging ja schnell mit der Hilfe. :-)

3D -Fläche erzeugen und Bild draufmappen.

Grüße aus Kiel,
Michael.

Allplan 2023 Architektur

Attachments (2)

Type: image/jpeg
Downloaded 58 times
Size: 80,78 KiB
Type: application/zip
Downloaded 670 times
Size: 151,31 KiB

Done!
Apart from the shell that had to be redrawn, the contour recognition worked very well.
I used slabs which I then converted to 3D volume.
It really gives a 3D badge...
This is an example when we have to make a vectorization (old plan, cadastral plan, logo, etc.).
___________

Fertig!
Abgesehen von der Schale, die neu gezeichnet werden musste, funktionierte die Konturerkennung sehr gut.
Ich habe Platten verwendet, die ich dann in 3D-Volumen konvertiert habe.
Es gibt wirklich ein 3D-Wappen...
Dies ist ein Beispiel, wenn wir eine Vektorisierung vornehmen müssen (alter Plan, Katasterplan, Logo usw.).


Attachments (3)

Type: image/png
Downloaded 42 times
Size: 151,22 KiB
Type: image/png
Downloaded 56 times
Size: 94,63 KiB
Type: application/octet-stream
Downloaded 932 times
Size: 4,31 MiB

Quote by cadworker
moin,
habe mal das wappen als 3d Scheibe (körper mit kontur des wappens)mit der oberfläche des wappens erstellt.
die zip-datei importieren sieh anhang


Ja Moin

Das sehe ich jetzt erst. Das ist ja genial, vielen Dank dafür!

Natasa Katanic

1 - 10 (11)

https://campus.allplan.com/ uses cookies  -  More information

Accept