[Question] 3D-Polylinie parallel versetzen


Hallo zusammen,
ist es möglich eine 3D-Polylinie im Grundriss parallel zu versetzen?
Ich kenne die Funktion paralleler Linienzug, mit dieser bekomme ich aber keine brauchbaren Ergebnisse.
Als Workaround extrudiere ich mir im Moment ein Rechteck mit der entsprechenden Breite entlang der Polylinie und greife mir anschließend aus dem entstandenen Körper die Außenkanten ab.
Aber das geht doch hoffentlich noch eleganter?

Gruß
Jan

Brücken und Ingenieurbau
VIC Planen und Beraten GmbH

https://www.vic-gmbh.de/

Dafür gibt's dann die Funktion "Paraleller Linienzug 3D"

Software: Allplan, Lumion, OM by Cycot, FM by Cycot, Nevaris...
Coachings unter http://www.cycot.de / Tutorials unter http://www.allplanlernen.de

Da hatte ich mich unklar ausgedrückt. Genau die Funktion meine ich, mit der ich nicht klar komme. Zum einen kann ich nicht eine bestehende Polylinie auswählen, sondern muss alles abklicken. Bei langen Pfaden nervig.
Zum anderen passt das Ergebniss an Eckpunkten der Polylinie nicht, siehe Screenshot.

Brücken und Ingenieurbau
VIC Planen und Beraten GmbH

https://www.vic-gmbh.de/

Attachments (1)

Type: image/jpeg
Downloaded 107 times
Size: 6,07 KiB

Da müsste man bei besagtem Werkzeug je Teilstrecke die Ausrichtung der Paralellen einstellen können. Das geht leider nicht und deshalb kommen solche Eckversprünge dabei heraus.

Software: Allplan, Lumion, OM by Cycot, FM by Cycot, Nevaris...
Coachings unter http://www.cycot.de / Tutorials unter http://www.allplanlernen.de

Dear Jan,

thank you for your feedback.
Unfortunately Offseting 3D curves its not trivial even for 3D polyline, when 3D polyline segments are not in the same plane.
For offseting 3Dcurves/lines/polylines which segments are in same plane, I recommend to use fnc. Parallele zu Element which handles nicely these cases.
When your 3D polyline has segments with different orientation (Z direction segments, sloped,...) this is far more complicated.
Those additional offseted segments created by fnc. Paralleler Linienzug 3D however looks strange but there is a reason for those: When neighboring segments of the Polyline has different orientation together with the definition of the orientation of the offseted segments (taken from the active viewport, e.g. Floor plan) they need to stay parallel to the definition plane, but this causes that these offseted lines has no intersection (skew lines)! see picture, therefore there is a additional segment on the offseted line to connect them.

So without changing the orientation of the offseted segments (not following anymore defined offset plane) there is no way to get result you expects.

Therefore either you may use workaround you mentioned in your comment, or create Individual offseted segments with fnc. Parallele zu Element and then solve manually the connections by extending or shortening the offseted lines to their intersection. However vertical inclined segments needs to be offseted as last because their position needs to be adjusted by considering previous and next segment (offset -> move).

To automate this process to get desired result from my point of view it will require to adjust the specific connections when position of offseted curves/lines are calculated by not yet created = user inputs, additional options needed.

To understand and propose proper solution I would like to ask you to provide more detail requirements + data. (What is the reason, what needs to be modelled, why, and expected results,... )

Thank you

Best regards

Martin Mikus
Product Manager Allplan Architecture

S pozdravom | Best regards | Mit freundlichen Grüßen

Martin Mikus
Product Manager Allplan Architecture

Attachments (2)

Type: image/jpeg
Downloaded 57 times
Size: 76,82 KiB
Type: image/jpeg
Downloaded 47 times
Size: 19,69 KiB

Hello Martin Mikus,
i will answer in german, because it´s easier for me. Feel free to translate my post.

Ein Anwendungsfall den wir sehr häufig haben ist folgender:
Wir haben vom Verkehrsanlagenplaner eine 3D-Randachse erhalten. Wir müssen unser Bauwerk, z.B. eine Stütze aber in einigem Abstand zu dieser Achse erzeugen. Wenn es sich um einen Bogen oder eine Klothoide handelt, können wir im Moment die 3D-Achse nicht einfach parallel verschieben, sondern müssen den beschriebenen Umweg gehen.

Brücken und Ingenieurbau
VIC Planen und Beraten GmbH

https://www.vic-gmbh.de/


https://campus.allplan.com/ uses cookies  -  More information

Accept