[Question] Change automatically the height of all windows

Balises:

Hello everybody,

my question is very basic but it seems I cannot find the answer.

I want to change the height of all windows
but I cannot seem to find a way to do it, apart from one after the other.

The tool "Transfer Component Properties" changes everything, incl. the width of the window.

I had also the same problem with the door openings, but this time with the lines for the threshold.
I had none, but moving to 1.50 drawings I need both with a specific configuration.

Is this possible?

Thank you very much in advance

Maria

Show most helpful answer Hide most helpful answer

Hello,

Use the function "Change Archit. Properties" and select only the height (see online help).


Hello,

Use the function "Change Archit. Properties" and select only the height (see online help).


Bertrand thank you very much!
My question seems even stupider now.

Do you have any idea about the second part of my question (attached image)?
I need to transfer these threshold-settings to all door openings.

Pièces-jointes (1)

Type: image/png
Téléchargé 12 fois
Size: 15,56 KiB

Hi Maria,

You can use "Define, Modify Reveal" (see online help).

No question is stupid! Everyone should learn at their own pace.


Dear Maria,

There is different way to do these changes:

* Direct modification on element one by one.

icon in picture attached

** use the tool "transfer property for architectural element", this one will ask you to copy all property of one element and than you can modify what you want and select any windows which will be modify directly.

In this case, you are right, all information are modified similar to the original one.

If you choose an opening, you can apply this setting only for opening, so there is a predifined filter per type.

*** use the other tool "Chang Arch Propert":

This one is more open and you can define the height but not the thickness or the width.

If you want to apply the change, you can select the element one by one or use the filter "Step by step".

HINT: Use of the filter:

First of all, you can click on an object and look to the property, where you could find per example the length.

select only the lenght and save this selection as a favorite of attribut.

Later one when you use the any tool, you can ask the filter "step by step" to add only the element which are an opening and mesure 50cm.

example in picture attached

Good Use!

Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support

Allplan France & Allplan Software Engineering

Depuis 2006

Pièces-jointes (2)

Type: image/png
Téléchargé 6 fois
Size: 2,27 KiB
Type: image/png
Téléchargé 14 fois
Size: 19,99 KiB

https://campus.allplan.com/ utilise des cookies  -  Plus d'informations

Accepter