[Domanda] Can I use 18 or 22 Bar Diameter ? [Risolto]

Tags:

Hello everybody !

Can I use 18 or 22 diameter of steel bar ? I'm trying to Define it manual but it showed an error message (Diameter 18 not allowed)..
sorry about my English !

I attached images to see the problem !

Thank you !

Allegati (2)

Type: image/png
264 scaricato
Size: 190,74 KiB
Type: image/jpeg
278 scaricato
Size: 14,45 KiB

Show solution Hide solution

Hi Hamza,

It's not possible to add a diameter in this way.

In fact, depending on your licence, Allplan is installed with country catalog. Than you have special catalog of bars and mesh linked to your country.

It's possible to change your country catalog by loading another country withour any issue.

By the way, you must first check your catalog.

To do that, just go to 'Tools/Defaults/Cross Section catalog' and check the bars 'RU' and Meshes 'MA'.

You can see some icone to load and save catalog. You can by this ways load other country catalog.

You can find the other country catalog on the program folder New/Ing and choose the one you need.

If you want to change your own one, than you can also change the project setting as 'project' for the cross section catalog.

Than your change will affect only this project.

To check you must click on one line and 'Edit' and to add, you must click on 'New'.

After that you can see your new bar diameter in any engineering Tools.

Good Use!

Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support

Allplan France & Allplan Software Engineering

Depuis 2006

Allegati (3)

Type: image/jpeg
293 scaricato
Size: 43,28 KiB
Type: image/jpeg
262 scaricato
Size: 53,61 KiB
Type: image/jpeg
269 scaricato
Size: 74,69 KiB

Hi Hamza,

It's not possible to add a diameter in this way.

In fact, depending on your licence, Allplan is installed with country catalog. Than you have special catalog of bars and mesh linked to your country.

It's possible to change your country catalog by loading another country withour any issue.

By the way, you must first check your catalog.

To do that, just go to 'Tools/Defaults/Cross Section catalog' and check the bars 'RU' and Meshes 'MA'.

You can see some icone to load and save catalog. You can by this ways load other country catalog.

You can find the other country catalog on the program folder New/Ing and choose the one you need.

If you want to change your own one, than you can also change the project setting as 'project' for the cross section catalog.

Than your change will affect only this project.

To check you must click on one line and 'Edit' and to add, you must click on 'New'.

After that you can see your new bar diameter in any engineering Tools.

Good Use!

Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support

Allplan France & Allplan Software Engineering

Depuis 2006

Allegati (3)

Type: image/jpeg
293 scaricato
Size: 43,28 KiB
Type: image/jpeg
262 scaricato
Size: 53,61 KiB
Type: image/jpeg
269 scaricato
Size: 74,69 KiB

Hi Judy,
Thank you for a quick respond..

I did it like you said.. and I can use all diameter I need..

So helpful Explanation !


https://campus.allplan.com/ utilizza cookies  -  Maggiori informazioni

Accetta