Результат поиска

11 - 20 (23)
Версия:  Allplan 2014 / Allplan 2013 / Allplan 2012  | Последнее изменение: 04.01.2018
 

Question:

After I have updated the driver of a graphics card from the Nvidia Quadro or GeForce series, I cannot start Allplan anymore.
I can see numerous error messages. What can I do?



Answer:

Allplan no longer starts after you have installed a current driver of the Nvidia GeForce or Nvidia Quadro WHQL series.


You can solve the problem as follows:

For customers running Allplan 2014:
Install at least version 2014-1-3. This version works with the drivers mentioned above.

For customers running Allplan 2013 or an earlier version:
Start the Services application.
Select Service -> Windows Explorer -> General program data.
(Allplan 2012: Services application -> Service -> Windows Explorer (program folder))
Open the ETC folder and then the "Shaders" folder, for example, C:\ProgramData\Nemetschek\Allplan\2013\Etc\Shaders.
Find the "Postprocess.frag" file and rename it "Postprocess.OLD".
Copy the "Postprocess.frag" file, which you can find attached to this FAQ, into the "Shaders" folder.

A note on Allplan 2014-1-3:
Download this version from Allplan Connect or from the FTP server.

Allplan Connect:
https://connect.allplan.com/de/support/downloads.html

FTP server:
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/2014/CD/
Copy this link and paste it into the address bar of Windows Explorer. Then press ENTER.
This opens the folder on our FTP server.
Select the appropriate file (for example, 'DoWn-allplan2014-1-3_x64-cad.zip' for 64-bit systems) and select Edit -> Copy (Ctrl+C). (If you run the Windows 32-bit system, download the other file.)
Switch to a folder on your computer and select Edit -> Paste (Ctrl+V).
After having downloaded the file, you can decompress it and start installing it by double-clicking the exe file.
To download large files, you can also use a download client, such as Filezilla (http://filezilla-project.org/).

Загрузка PDF  FAQ_EN_Allplan_does_not_start_after_update_of_graphi... Загрузка Postprocess.frag
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 01.10.2020
 

Question:

Although the server is not connected with the Internet, I would like to activate the license with the Product Key for the license server. What can I do?

Information:

The easiest way to activate and return Allplan licenses is to do this online. In other words, the server has Internet access. However, you can also activate your license on a computer without Internet access (offline licensing).

Requirements for activating a license offline:

  • You have a valid Product Key.
  • The license server is installed on the server. At least license server 2016-1-5 is installed.
    You can find detailed information on the version (Build-ID) at bottom on the left in the License Settings program.
  • You have another computer with Internet access.


Important: Activating a license offline involves two steps. In addition, you need to upload a receipt file so that you can return the license offline later.

There are the following basic steps:

  • Creating and uploading the license request file
  • Downloading and importing the license update file
  • Creating and uploading the receipt file


If you have several license server licenses, you need to do this for each license.

The online computer uses the following web page:
http://lc.codemeter.com/59885/depot/index.php



Note:

As both the license file and the receipt file are saved with the name of the container number by default, it may happen that you mix up these two files. Thus, we strongly recommend that you use meaningful names for the files. For example, include the word “license” in the name of the license file and “receipt” in the name of the receipt file.
This is particularly important if you want to activate several licenses offline.


Answer:

Activating licenses offline

To activate licenses, use CodeMeter Control Center.
Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. An an alternative, go to the Windows search box and type Codemeter.

Select the empty Allplan CM6container (long number starting with 130; gray symbol).
If the container is not available, save the file attached to the C:\Program Files\Allplan GmbH\License Settings folder. Then open this file using the shortcut menu. This imports the empty container to CodeMeter Control Center.

Select the new, empty Allplan CM6 container and click Activate licenseon the right. Select Create license request. Create a *.WibuCmRaC file for this container.


Take this file to a computer that is online. Go to the following web page:
http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license. Click Activate license.

Next, select the Fimcode 6000100area on the right.

You can see your license with all available updates. Make sure everything is selected. Click Offline License Transferat the bottom on the right.

You can now upload the *.WibuCmRaC file (Browse....) by clicking Upload license request now. This creates your license, which you can download by clicking Download license update file now. Install this license on your server.

To do this, open CodeMeter Control Centerand click File -> Importlicense.


The activated license is now visible in the License settingsand can be used for the Allplan clients.


Finally, upload the receipt file.
To do this, open CodeMeter Control Centeragain and select the new Allplan CM6 container (with the number 130-XXXXXXX).

Then click License update -> Next -> Create receipt.
Create the receipt file for this container.
Upload this receipt file using the web page.

Take this file to the computer that is online. Click Nexton the web page.
If you have already closed the web page, use the link given above and enter your Product Key once again. Then select Continue with license transfer.
Select the receipt file and click Upload receipt now.
Click OKto confirm. This completes license activation.


Note:
After you have activated the license on the server, proceed as described in “Installing and configuring the license server”. You can find this guide here:
https://connect.allplan.com/en/faqid/20150618084450.html.


Returning licenses offline
You can return licenses in the same way:

  • Creating and uploading the license request file
  • Downloading and importing the license update file
  • Creating and uploading the receipt file
Загрузка PDF  FAQ_EN_License_server_-_activating_a_license_offline... Загрузка Allplan_CM6.WibuCmLIF
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 01.10.2020
 

Question:

I activated my license offline. Now I would like to update this license or get the license for the new version.
What can I do?



Answer:

To update the license, you can use CodeMeter Control Center.

Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. An an alternative, go to the Windows search box and type Codemeter.
You can find the container numbers in the ‘License’ area. Make sure your license container is included in this list.
If you have a stand-alone license, the name of this container is Allplan GmbH and its number is 128-XXXXXXX.

Select this container and click ‘License Update’ on the right. The assistant starts.
Select Create license request. Create a *.WibuCmRaC file for your container.

Take this file to a computer that is online.

Go to the following website:

http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license.
Click Activate license.


You can see the new license update, which is selected. Click Offline License Transferat bottom right.

Upload the *.WibuCmRaC file to get the license update as a file. Import this file
to your computer.

To do this, open CodeMeter Control Center and click File -> Import license.
You can now see the updated license in the license settings.


Note:
You cannot use Allplan Connect to update licenses. However, you can activate licenses offline for the first time or return licenses using Allplan Connect.

Загрузка PDF  FAQ_EN_Updating_licenses_offline_.pdf
Версия:  Allplan 2015 / Allplan 2014 / Allplan 2013  | Последнее изменение: 17.12.2015
 

Question:

How can I move NemSLock Server to a new server?



Answer:

Reinstalling NemSLock Server

  • Select one of the temporary license files for NemSLock server (for example, 1234567a_001_psd.nslsrv). These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
  • When you opt for the “Custom” setup type, you can choose between the following program features:
    Console
    You can use this program to administer NemSLock Server. The console can be installed on several workstations. This way, you can administer the server from a number of different locations. However, you can only connect one console to the server at any one time.
    Server
    The actual license server.
    Logviewer
    This tool analyzes the log files of NemSLock Server.
    User List Generator
    You can use this tool to create the users for NemSLock Server from a text file or based on a server.
    By default, Setup installs all these features.
  • If your license includes configurations for several seats, you need to install the additional temporary license files for NemSLock server after the installation (see below).


Transferring the user administration from the old server (if users are available)

  • You can find the user administration in the program folder of the license server. Copy the "users.mcf" file to the program folder of the new license server.
  • Stop the license server service on the new server before you copy the file. To do this, start the "stopService.bat" program, which is also in the program folder of the license server.
  • After copying, start the license server service again. To do this, use the "startService.bat" program.


Returning the registered licenses

  • Open NemSLock 2006 Server Console on the old server by clicking the icon on the desktop or Start -> (All) Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
  • Click "Stop server".
  • Click "Modules".
  • Click "Transfer license permanently".
  • Confirm the following dialog boxes. Click “Browse”.Windows Explorer starts and opens the folder with the hcws-format file. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.Send this file by email to register@nemetschek.de.
  • We will send you an email, confirming that we have received the licenses.
  • You always have to return all licenses.
  • After you have done this, they are only valid for two more days.


Registering the license(s) on the new server

  • Open NemSLock 2006 Server Console on the new license server.
  • Click "Modules" on the left.
  • Select the seat you want to register. If your license contains configurations for several seats, read the notes further down.
  • Click "Registration request (register.txt)".
  • Click "Edit".
  • Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
  • Click "Create registration request".Windows Explorer starts and opens the folder with the "register.txt" file. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.Send the registration request by email to register@nemetschek.de.


If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.

How to install licenses

  • Open NemSLock 2006 Server Console.
  • Click "Stop server" on the left.
  • Click "Modules" on the left.
  • Click ”Browse” to navigate to the registered license file.
  • Click "Install license file".
  • After this, you can start the server again by clicking "Start server".


Configuring the clients

  • Now you need to change each client to the new license server.
  • Click Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  • If the license server window is hidden, click "Configure NemSLock Server"at the bottom. It is a good idea to lock this window. All you need to do is click the drawing pin icon.
  • Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
  • Now the user can select one of the seats provided. Click "Close" to complete the configuration. Now you can start Allplan.
  • After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.


Notes:

  • If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
  • 2014-1 and later: If the latest version of License Manager is installed (file version 1. 0. 26. 153 or later, see License Manager- Options- System), you can also select several licenses. If one of the selected licenses is currently being used by someone else, the program will automatically select the next available license.
  • Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
  • The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.
Загрузка PDF  FAQ_EN_Moving_NemSLock_Server_to_a_new_server.pdf ...
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 30.09.2020
 

What are the advantages of the new licensing method?

  • Better protection; easier to use (for example, when you want to transfer the license to a different computer).


What is the Product Key?

  • The Product Key is a unique, 26-digit character string. You can use it to activate a license for Allplan.


How do I get my Product Key(s)?


How do I transfer my activated license to a different computer or to a new computer?

  • Before you can transfer the license to a different computer, you first have to return the license on the computer where you originally activated it. Then you can enter the Product Key on a different computer, activating the license there. For more information, go to https://connect.allplan.com/en/faqid/20150618131629.html


How do install Allplan or activate my license on a computer without Internet access?

  • The easiest way to activate and return Allplan licenses is to do this online. In other words, the computer has Internet access. However, you can also activate Allplan on a computer without Internet access. For more information, go to https://connect.allplan.com/en/faqid/20150618131413.html


How can I update a license (for example, after I have purchased an additional option)?


Can I still use hardlocks?

  • No, you can't. Allplan 2016 no longer supports hardlocks.


How do I install Allplan as a trial version?

  • Download Allplan 2016 from Allplan Connect. You will receive the Product Key for the trial version by email.



Загрузка PDF  FAQ_EN_General_information_on_the_new_licensing_meth...
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 01.10.2020
 

Question:

I activated my license offline. Now I would like to update this license or get the license for the new version.
What can I do?



Answer:

To update the license, you can use CodeMeter Control Center.

Start CodeMeter Control Center.
To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. An an alternative, go to the Windows search box and type Codemeter.

You can find the container numbers in the ‘License’ area. Make sure your license container is included in this list.
For license server licenses, this is an Allplan CM6 container with the number 130-XXXXXXX.


Note:
If there is only an Allplan GmbH container with the number 128-XXXXXXX, your license server is too old. In this case, proceed as described here: https://connect.allplan.com/en/faqid/20160527114300.html.


Select this Allplan CM6 container and click License updateon the right. Select Create license request. Create a *.WibuCmRaC file for your container.

Take this file to a computer that is online.

Go to the following web page:
http://lc.codemeter.com/59885/depot/index.php

Enter your Product Keyin the “Ticket” line and click Next. You can now see your license.
Click Activate license.


You can see the new license update, which is selected. Click Offline License Transferat the bottom on the right.

You can now upload the *.WibuCmRaC file (Browse....) by clicking Upload license request now. This creates your license, which you can download by clicking Download license update file now. Install this license on your server.

To do this, open CodeMeter Control Centerand click File -> Importlicense.
You can now see the updated license in the license settings.



Finally, upload the receipt file.
To do this, open CodeMeter Control Centeragain and select the Allplan CM6 container with the number 130-XXXXXXX.

Then click License update -> Next -> Create receipt.
Create the receipt file for this container.

Take this file to a computer that is online.

Upload this receipt file using the web page.
Click Nexton the web page.
If you have already closed the web page, use the link given above and enter your Product Key once again. Then select Continue with license transfer.
Select the receipt file and click Upload receipt now.
Click OKto confirm. This completes license activation.


If you have several license server licenses, all these licenses can be in the same Allplan CM6 container. However, you must upload the license update fileand upload the receiptfor each Product Key or license to update all licenses.



Notes:

  • You cannot use Allplan Connect to update licenses. However, you can activate licenses offline for the first time or return licenses using Allplan Connect.
  • Did you know that you can find details about you licenses in Allplan Connect at http://connect.allplan.com/license. Just load the details about the licenses displayed by clicking the information button at the end of a line.
Загрузка PDF  FAQ_EN_License_server_-_updating_a_license_offline_o...
Версия:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Последнее изменение: 08.05.2019
 

Question:

I would like to run the program on a different computer. How can I transfer the NemSLock license?



Information:

You can use the "Export/import - license transfer" tool to transfer an Allplan license temporarily from the registered computer to a different computer (a laptop, for example).
Licenses are always transferred between two specific computers. When you export the license from the source computer, you need to precisely specify the destination computer to which the license is to be transferred. A registered, running Allplan version must be installed on the source computer. At least a trial version of Allplan must be installed on the destination computer. Whether this trial version is still valid or has already expired is irrelevant.



Note:

The license should notbe transferred temporarily when you have bought a new computer and you want to run the program permanently on this new computer. The temporary license transfer is limited to 30 days. For more information please consult the online Help.


Answer:

Open the Services application -> Utilities -> License -> License Manager (NemSLock).

Select theExport/import - license transfertool.

You can choose between a transfer that is "Directly on the network" and one that is "Indirectly by transfer file". The direct transfer requires that the source computer and the destination computer are connected via a network. As opposed to the indirect transfer, you can also exchange licenses when you opt for the direct transfer.


A. Transferring the license directly

Preparing the destination computer for the license import

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import licenseoption.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Using the source computer to export the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Export license option. Enter the computer name or IP address of the destination computer. For the time limit, specify after how many days the license file is to be available at the source computer again. This will happen automatically as soon as this period expires.
  5. Click Finish.


Returning the license file to the source computer before the time limit expires

Source computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import license option. The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Return license option. The "Return License" dialog box appears.
  5. Enter the name or IP address of the computer to which you want to return the license and click Return. A message appears announcing that the license has been exported to the destination computer.
  6. At each computer, clickOKto confirm.



B. Exchanging licenses while online

Specify which computer is to be the master and which computer is to have a subordinate role (slave).

Preparing the slave for the license exchange

  1. At one of the two computers, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Select the "Nemetschek Softlock License Manager" tab. Click the Export/import - license transfericon at the top.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses -> Slave.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.



Exchanging license using the master

  1. Using the other computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses-> Master. Enter the computer name or IP address of the slave. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  5. Click Finish.


Returning the exchanged licenses before the time limit expires

  1. Using the slave, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Reverse license exchange -> Slave -> Reception.
  5. Using the master, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  6. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  7. Select Directly on the network.
  8. Select Reverse license exchange -> Master. Check whether the proposed computer name or IP address of the slave is correct.
  9. Click Reverse.



C. Exchanging licenses while offline


Creating computer ID files for the source and destination computers

First you need to create two computer-specific ID files: one for the source computer and one for the destination computer. These files are valid until you change the hardware of the corresponding computer. If the hardware changes (adding a hard disk or a DVD/CD drive, for example), you need to create a new computer ID file.

To create a computer-specific ID file:

  1. Start the Nemetschek License Manager by clicking Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top and select Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select Create computer ID file.
  4. Click Browse...and specify the path where you want to save the computer ID file.
  5. Click Finish.


Note:

The folder you select must exist. The computer-specific COMPUTERNAME.nslid file is created in this folder.
If the source computer and the destination computer are connected on the network, you can specify the source and destination paths over the network without having to use storage media or email attachments.

Exporting the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Export license option. The Import Computer IDdialog box is displayed.
  4. To export the license for a specific destination computer, do the following: Click Browse..., and select the computer ID file of the destination computer (name_of_destination_computer.nslid) and clickOpen. Click Next.
  5. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  6. Click Create License Transfer Fileand clickOKto confirm. A file (name_of_destination_computer_date_time.NslTransfer) is created for the destination computer.


As soon as you have exported the license, Allplan no longer starts on the source computer.

Importing the license file into the destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "License Transfer" dialog box is displayed.
  3. Select the (Re-)Import license option. Click Browse....and select the license file you want to import. Click Open.
  4. Click Import and clickOKto confirm.



Note:

Each license file can be imported just once. For this reason, the file name is preceded by the word "used_" after the import.

Returning the license file to the source computer before the time limit expires

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Return license option.
  4. Click Browse...and select the path where you want to save the license file returned. Then click OKto confirm.
  5. Click Return and clickOKto confirm.
  6. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  7. Select the "Nemetschek Softlock License Manager" tab. Click License transfer -> Offline license transfer. The "Offline License Transfer" dialog box is displayed.
  8. Select the (Re-)Import license option.
  9. Click Browse...and select the corresponding license file. Then click Open.
  10. Click Import and clickOKto confirm.
Загрузка PDF  FAQ_EN_Transferring_NemSLock_licenses_temporarily_(i...
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015  | Последнее изменение: 16.10.2020
 

Information:

Quality reporter notified us of a crash. In analyzing the data, we found that you can improve the stability of your Allplan installation by installing the current graphics card driver.

You can find the current driver on the homepage of the graphics card manufacturer.
http://www.amd.com/de Support & Driver -> Download driver
http://www.nvidia.de Download driver

Use the driver on the homepage of the manufacturer. Do not use the driver provided by Windows Update.

Notes for notebook users:
It is essential that you install the graphics card drivers provided by the notebook manufacturer! You can find the current drivers on the homepage of the manufacturer.


Notes:

  • If the program still crashes after you have installed the latest graphics card driver, change the graphics mode from OpenGL to GDI+ in Allplan.

    Allplan 2012-1 and later:
    Start Allplan and select Tools -> Options.
    Select Desktop environment -> Display > Hardware acceleration - graphics area: switch off the "Use OpenGL for all viewports" option. Restart Allplan.

    From Allplan 2011-1 to Allplan 2012-0-2:
    Start the Services application.
    Service -> Hotline Tools -> draw -> OK
    On = OpenGL mode
    Off = GDI+ mode
  • You can find information on graphics cards at
    https://www.allplan.com/services/cad-software-support/grafikkarten.html
Загрузка PDF  FAQ_EN_Quality_Reporter_-_graphics_card_driver_cause...
Версия:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011 / Allplan 2009  | Последнее изменение: 11.07.2016
 

Question:

How can I move NemSLock License Server to a new server?



Answer:

If you want to run NemSLock 2006 Server on a different or new server, you first need to render the license ineffective. For this, you still require the old server. After this, you need to contact Nemetschek Allplan Systems GmbH in order to activate the license for the new server.

As soon as you return the license, the status of the existing license is set to trial for 48 hours; then it will expire.

Note:Transfer the license to the new server while the old server is still available.

Do the following:

  • At the new server:install NemSLock 2006 Server with the temporary license files provided with the program.
  • At the clients:Exit Allplan on all workstations.
  • At the old server:return the license(s). Open NemSLock 2006 Server Console, click "Stop server", switch to "Modules" and click "Transfer license permanently". Then select "Next" and "Create". Click the "Send" button to send the .hwchs file you just created to "register@nemetschek.de" (provided an email program is installed and configured on this server). Otherwise, click "Browse" to open the folder with the .hwchs file in Windows Explorer. Now you can use any computer to send this file to the address mentioned above.
    Finally, click "Start server". The existing licenses are valid for two more days.
  • At the clients:for the time being the clients can continue to work with the old license server.
  • At the new server:After a few minutes, our server will send you an email confirming that the licenses have been returned. Now you can generate registration requests for all licenses. Next, install the licenses.
  • At the clients:Now you can switch the clients one after the other to the new server. To do this, open the License Manager by clicking Start -> (All) Programs -> Nemetschek -> Nemetschek Softlock 2006 -> License Manager.




Tip:

To transfer the existing users to the new server, back up the Users.mcf file, which you can find in the program folder of NemSLock 2006 Server, and copy this file to the new server after the installation. Prior to copying the file, stop the "NemSLock Server 2006" Windows service, copy the file to the program folder and start this service again.

Загрузка PDF  FAQ_EN_Moving_NemSLock_Server_to_a_new_server_(short...
Версия:  Allplan 2016  | Последнее изменение: 30.11.2017
 

Question:

Can I "automate" the installation of Allplan?


Answer:

You can install Allplan 2016 in silent mode. This installation mode is fully automatic; you do not need to enter anything. Silent installation is particularly useful if you want to install Allplan 2016 with the same settings on a large number of workstations on a network.

You can only install in silent mode if ...

  • You take the licenses for the clients from a license server.
  • You have installed the license server.
  • You have activated the license of the license server.

For more information on the license server, go to https://connect.allplan.com/en/faqid/20150618084450.html

Some more tips:

  • Before you start installing, unzip the Allplan installation package (for example, using the 7_Zip program) and make sure this package is in a folder that can be accessed by all the clients you want to install.
  • Start the command prompt for running the setup program always as a local administrator. To do this, open the shortcut menu and select "Run as administrator".
  • Setup will automatically install any Microsoft components required by Allplan such as Microsoft .NET-Framework or Microsoft Report Viewer without prompting you to confirm.




Installing in silent mode involves three steps:

Creating the log file for installing in silent mode

Start by installing Allplan 2016 with the /r option on a typical workstation. During installation, Setup automatically writes all entries to a log file named setup.iss. You can then use this file to install the program on the other workstations.

Installing in silent mode

Next, install Allplan with the /s option on all other workstations. Installation is based on the setup.iss log file you created in the first step.

Checking the installation

Finally, you should check the setup.log file, which was created automatically during setup, to see whether everything was installed correctly.

Note: When installing in silent mode, Setup usually uses the same setup.iss file to install the program on all workstations. However, you can edit some settings of the setup.iss file if you want to adjust paths. For more information, see Adjusting the setup.iss file.

To install Allplan in silent mode, do the following:


1. First installation:
Start by creating a record file. To do this, run setup with the settings you need. You only need to do this once.
Setup writes the license settings to the %AppData%\Nemetschek\Lic3.ini file.
Use the command prompt to start this installation with the "/r" option (for record):

To run the setup program, open the command prompt as a local administrator and type the following:
setup.exe /r

Setup starts and runs as usual.

When you are prompted to choose the license configuration, select the Use active licenseoption.

Setup logs the entire installation process, writing everything to the setup.iss file.

If you want, you can change the name and folder of this file:

setup.exe /r /f1<folder>:\Setup.iss
For example:
setup.exe /r /f1c:\Setup.iss
In this case, the file is saved directly to C:\.

Be careful:
enter "f1" and the folder without any blanks!

Copy the %AppData%\Nemetschek\Lic3.inifile to the %AppData%\Nemetschek folder of every client.
If you install Allplan on a client for the first time, you need to create the Nemetschek folder in %AppData% first (for example, C:\Users\Username\Appdata\Roaming\Nemetschek).

2. Silent installation:

Check that the Lic3.ini file is in the %AppData%\Nemetschek\ folder and that setup can access the setup.iss file.

Setup logs the entire installation process again, writing everything to the setup.log file. You can find this file in the same folder as the setup.iss file. With the /f2 option, you can specify a different folder and file name for the setup.log file.

To start installing Allplan in silent mode on a client, open command prompt as a local administrator and type the following:

setup.exe /s /f1<folder>:\Setup.iss/f2<folder>:\Setup.log

For example:
setup.exe /s /f1c:\Setup.iss/f2c:\Setup.log
In this case, the file is saved directly to C:\.

Check the setup.log file to see whether everything has been installed correctly. The [ResponseResult] section should return the &apos;ResultCode=0&apos; value.


Note:

If you have several licenses or license servers, select the required license for each client using the Services application - Utilities - License settings.

Refer to the online help for detailed information on installing in silent mode.
To open the help system, press the F1 key during setup. Go to the "Contents" tab, select "Installing" and then "Installing in silent mode".

You can also find information in the help for the license settings:
Services application -> Utilities -> License settings
To open the help system, press the F1 key. Go to the "Contents" tab, select "Licensing Allplan using a license server" and then "Installing in silent mode".


Please note that we cannot provide support for this installation method.

Загрузка PDF  FAQ_EN_Allplan_silent_installation_(Allplan_2016_and...
11 - 20 (23)
https://campus.allplan.com/ uses cookies  -  More information

Accept