Результат поиска

31 - 34 (34)
Версия:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011 / Allplan 2009  | Последнее изменение: 11.07.2016
 

Question:

How can I move NemSLock License Server to a new server?



Answer:

If you want to run NemSLock 2006 Server on a different or new server, you first need to render the license ineffective. For this, you still require the old server. After this, you need to contact Nemetschek Allplan Systems GmbH in order to activate the license for the new server.

As soon as you return the license, the status of the existing license is set to trial for 48 hours; then it will expire.

Note:Transfer the license to the new server while the old server is still available.

Do the following:

  • At the new server:install NemSLock 2006 Server with the temporary license files provided with the program.
  • At the clients:Exit Allplan on all workstations.
  • At the old server:return the license(s). Open NemSLock 2006 Server Console, click "Stop server", switch to "Modules" and click "Transfer license permanently". Then select "Next" and "Create". Click the "Send" button to send the .hwchs file you just created to "register@nemetschek.de" (provided an email program is installed and configured on this server). Otherwise, click "Browse" to open the folder with the .hwchs file in Windows Explorer. Now you can use any computer to send this file to the address mentioned above.
    Finally, click "Start server". The existing licenses are valid for two more days.
  • At the clients:for the time being the clients can continue to work with the old license server.
  • At the new server:After a few minutes, our server will send you an email confirming that the licenses have been returned. Now you can generate registration requests for all licenses. Next, install the licenses.
  • At the clients:Now you can switch the clients one after the other to the new server. To do this, open the License Manager by clicking Start -> (All) Programs -> Nemetschek -> Nemetschek Softlock 2006 -> License Manager.




Tip:

To transfer the existing users to the new server, back up the Users.mcf file, which you can find in the program folder of NemSLock 2006 Server, and copy this file to the new server after the installation. Prior to copying the file, stop the "NemSLock Server 2006" Windows service, copy the file to the program folder and start this service again.

Загрузка PDF  FAQ_EN_Moving_NemSLock_Server_to_a_new_server_(short...
Версия:  Allplan 2016  | Последнее изменение: 30.11.2017
 

Question:

Can I "automate" the installation of Allplan?


Answer:

You can install Allplan 2016 in silent mode. This installation mode is fully automatic; you do not need to enter anything. Silent installation is particularly useful if you want to install Allplan 2016 with the same settings on a large number of workstations on a network.

You can only install in silent mode if ...

  • You take the licenses for the clients from a license server.
  • You have installed the license server.
  • You have activated the license of the license server.

For more information on the license server, go to https://connect.allplan.com/en/faqid/20150618084450.html

Some more tips:

  • Before you start installing, unzip the Allplan installation package (for example, using the 7_Zip program) and make sure this package is in a folder that can be accessed by all the clients you want to install.
  • Start the command prompt for running the setup program always as a local administrator. To do this, open the shortcut menu and select "Run as administrator".
  • Setup will automatically install any Microsoft components required by Allplan such as Microsoft .NET-Framework or Microsoft Report Viewer without prompting you to confirm.




Installing in silent mode involves three steps:

Creating the log file for installing in silent mode

Start by installing Allplan 2016 with the /r option on a typical workstation. During installation, Setup automatically writes all entries to a log file named setup.iss. You can then use this file to install the program on the other workstations.

Installing in silent mode

Next, install Allplan with the /s option on all other workstations. Installation is based on the setup.iss log file you created in the first step.

Checking the installation

Finally, you should check the setup.log file, which was created automatically during setup, to see whether everything was installed correctly.

Note: When installing in silent mode, Setup usually uses the same setup.iss file to install the program on all workstations. However, you can edit some settings of the setup.iss file if you want to adjust paths. For more information, see Adjusting the setup.iss file.

To install Allplan in silent mode, do the following:


1. First installation:
Start by creating a record file. To do this, run setup with the settings you need. You only need to do this once.
Setup writes the license settings to the %AppData%\Nemetschek\Lic3.ini file.
Use the command prompt to start this installation with the "/r" option (for record):

To run the setup program, open the command prompt as a local administrator and type the following:
setup.exe /r

Setup starts and runs as usual.

When you are prompted to choose the license configuration, select the Use active licenseoption.

Setup logs the entire installation process, writing everything to the setup.iss file.

If you want, you can change the name and folder of this file:

setup.exe /r /f1<folder>:\Setup.iss
For example:
setup.exe /r /f1c:\Setup.iss
In this case, the file is saved directly to C:\.

Be careful:
enter "f1" and the folder without any blanks!

Copy the %AppData%\Nemetschek\Lic3.inifile to the %AppData%\Nemetschek folder of every client.
If you install Allplan on a client for the first time, you need to create the Nemetschek folder in %AppData% first (for example, C:\Users\Username\Appdata\Roaming\Nemetschek).

2. Silent installation:

Check that the Lic3.ini file is in the %AppData%\Nemetschek\ folder and that setup can access the setup.iss file.

Setup logs the entire installation process again, writing everything to the setup.log file. You can find this file in the same folder as the setup.iss file. With the /f2 option, you can specify a different folder and file name for the setup.log file.

To start installing Allplan in silent mode on a client, open command prompt as a local administrator and type the following:

setup.exe /s /f1<folder>:\Setup.iss/f2<folder>:\Setup.log

For example:
setup.exe /s /f1c:\Setup.iss/f2c:\Setup.log
In this case, the file is saved directly to C:\.

Check the setup.log file to see whether everything has been installed correctly. The [ResponseResult] section should return the &apos;ResultCode=0&apos; value.


Note:

If you have several licenses or license servers, select the required license for each client using the Services application - Utilities - License settings.

Refer to the online help for detailed information on installing in silent mode.
To open the help system, press the F1 key during setup. Go to the "Contents" tab, select "Installing" and then "Installing in silent mode".

You can also find information in the help for the license settings:
Services application -> Utilities -> License settings
To open the help system, press the F1 key. Go to the "Contents" tab, select "Licensing Allplan using a license server" and then "Installing in silent mode".


Please note that we cannot provide support for this installation method.

Загрузка PDF  FAQ_EN_Allplan_silent_installation_(Allplan_2016_and...
Версия:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 23.09.2019
 

Question:

I purchased a new license and received a Product Key for Allplan. However, I use earlier Allplan versions with NemSLock server in my office. How can I install Allplan 2015 or an earlier version despite the new license? How can I activate the license on NemSLock server?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use NemSLock server with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Downloading from Allplan Connect:
https://connect.allplan.com/de/support/downloads.html

FTP server:
Copy this link and paste it into the address bar of Windows Explorer. Then press ENTER.
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de
This opens the folder on our FTP server.

Go to /download/Allplan/2015/CD (choose the path in accordance with the version you need) and select the appropriate file. Then click Edit -> Copy (Ctrl+C).
Switch to a folder on your computer and select Edit -> Paste (Ctrl+V).
Extract the ZIP file. Right-click the EXE file and select "Run as administrator".
Deactivate the virus scanner during installation.


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Use NemSLock server to request a registered license for the new seat

If you have not used a license server until now, install the license server using the trial license for NemSLock Server.

Installing NemSLock Server

  • Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

  • The trial license is also on the FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/Allplan 2015 Nemslock Server Trial.nslsrv

  • Select the trial license file for NemSLock Server. This license is valid for 30 days, but it includes only seat. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below).
  • Select the full installation.
  • If the service does not start automatically after Setup, select Control Panel -> Administrative Tools -> Services and start the Nemslock Server 2006 service.



Registering licenses

  • Open NemSLock 2006 Server Consoleby clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
  • Switch to Moduleson the left.
  • Select one of your seats.
  • Click the Registration request (register.txt)button.
  • Click Edit.
  • Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OKto confirm.
  • Click Create registration request. Windows Explorer opens and shows the register.txt file.
    If you have closed Windows Explorer, you can find the file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is
    C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License.
  • Use an editor to open the new register.txt file.

You can find the entry for your seat in line @23@seat:. Change it and enter your new seat number instead. For example, if you purchased seat 08, change the entry to @23@seat: 08. Save the file.

  • You can now use all the options provided by Windows Explorer to copy the registration file to a computer with Internet connection. You can do this on the network or you can use a USB stick. You can then email the file to us.
  • Send the email with the registration request to register@nemetschek.de.
  • You will promptly receive your registered license for the new seat.



Installing licenses
Exit Allplan on all workstations.

  • Open NemSLock 2006 Server Console.
  • Click Stop serveron the left.
  • Switch to Moduleson the left.
  • Click Browse and select the registered license file.
  • Click Install license file.
  • After this, you can start the server again by clicking Start server.



Note:

If you purchased several new licenses, you have to generate and send a separate registration request for each seat. Just repeat the steps described above. You will then receive a registered license file for each seat. You must install each file.

Загрузка PDF  FAQ_EN_Installing_an_earlier_version_with_NemSLock_s...
Версия:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Последнее изменение: 17.05.2017
 

Question:

I want to update the operating system of my computer. As far as I know, I have to return the license. How should I proceed?


Answer:

Use your computer to return the license before you switch to another operating system.

  • To return the license, select
    Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
    (Services application -> Utilities -> License -> License Manager (NemSLock)).

    Click "Relocate licenses-> Transfer licenses permanently to a computer" -> click "Next" and then "Create". The &apos;Send hardware change file (*.hrdwchg)&apos; dialog box opens. Click &apos;Browse&apos;.
    The program creates and saves the COMPUTERNAME.hrdwchgfile. Then Windows Explorerstarts and the folder with the hardware change file opens. You can now use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer having Internet access and so on. Email this file to register@nemetschek.de.


Note:
After you have created this file, the Allplan license of your old computer will still be valid for two more days.
As soon as we have removed the registration, we will send you a confirmation by email.


You can now switch to the new operating system.
After having done this, you need to register the license for the new system.

  • To register the license, select
    Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
    (Services application -> Utilities -> License -> License Manager (NemSLock)).
  • Select the license entry for your seat and click "Request license". Follow the instructions
    displayed on screen.
  • Create a new registration request (register.txt) and email this file to register@nemetschek.de.



You will promptly receive the final license.
Finally, install this license file to complete the switch.


Загрузка PDF  FAQ_EN_Returning_license_because_of_new_operating_sy...
31 - 34 (34)
https://campus.allplan.com/ uses cookies  -  More information

Accept