How can I transfer the NemSLock license permanently to a new computer?
Proceed as follows:
- Install the program on the new computer. Use the temporary license (xxx_xxx_psd.nslock) you received when you purchased the program. If you do not have a temporary license of the current version, contact your support team to request such a license.
You can then work with the program for 30 days – plenty of time to configure your new computer, transfer the office standard and projects and so on (you can find instructions in the FAQ database).
At the same time you can work with the program on your old computer without any restrictions.
- When you have transferred everything you need, return the license to us. To do this, use the old computer and click
Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
(Services application -> Utilities -> License -> License Manager (NemSLock)).
Click "Relocate licenses -> Transfer licenses permanently to a computer". This creates the COMPUTER_NAME.hrdwchg file. Send this file by email to email@example.com.
Tip: Click 'Browse' in the 'Send hardware change file (*.hrdwchg)' dialog box. The program creates and saves the COMPUTERNAME.hrdwchgfile. Then Windows Explorerstarts and the folder with the hardware change file opens. You can now use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer having Internet access and so on. Email this file to firstname.lastname@example.org.
After you have created this file, the Allplan license of your old computer will still be valid for two more days.
As soon as we have removed the registration, we will send you a confirmation by email.
- Create a registration request (register.txt) on the new computer and send this file by email to email@example.com.
To generate a registration request, do the following:
Open the License Manager (Service application -> Utilities- > License -> License Manager). Select the license entry for your seat and click "Request license". Please follow the instructions displayed on screen. Complete the form. Do not forget to enter your email address.
You will promptly receive the license for the new computer (provided you have returned the license to us as described above).
Installing this license file completes the license transfer to the new computer.
The COMPUTER_NAME.hrdwchg file is stored in the following folder:
Allplan 2012 and earlier:
- Windows 64-bit:
C:\Program Files (x86)\Common Files\Nemetschek\NemSLock2006\License
- Windows 32-bit:
C:\Program Files\Common Files\Nemetschek\NemSLock2006\License
Allplan 2013 and later:
- or C:\ProgramData\Nemetschek\NemSLock\HardwareTausch
How can I access the FTP server of technical support?
You can download data from and upload data to the FTP server.
To access our FTP server, you require a current Windows operating system. Do the following:
Please enter the following address in Windows Explorer (do not use Internet Explorer!):
1. Downloading data:
You can find our data in the /Download folder.
Right-click the folder(s) or file(s) you want to download and select "Save Target As ...".
Specify where you want to copy the data by selecting a folder on your computer.
If customers agree, we can provide customer-specific data in the /Customerfolder.
For this, you will get separate instructions.
2. Uploading customer data:
If we agree, customers can upload data to the /Upload folder.
- You can upload only files. You cannot upload folders to the server. If you want to upload an entire project, please save this project to a ZIP file first.
- You can also use Internet browsers to access the FTP server. However, there are some restrictions. Use an FTP client program (for example, FileZilla)to avoid errors. This makes it easier for you to upload and download data. See the following information.
- Login details for FTP program:
I have installed Allplan using the temporary Softlock license ("customer#_seat_psd.nslock") and "Trial" is displayed for its status in the License Manager.
How can I register this license?
You use License Manager to create a registration request and send it by email to firstname.lastname@example.org.
In response, you get a final license file. Installing this license removes the lime limit.
Below is a description of the necessary steps.
- Using the temporary license, you can start Allplan as a trial version. You can work with Allplan without any restrictions for 30 days.
After expiration of this period, Allplan starts as a viewer only. However, you can still request and install the final license.
- When running Windows Vista, start Nemetschek License Manager as the administrator:
Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
Click "License Manager" with the right mouse button and choose "Run as administrator" on the shortcut menu.
How to proceed:
1. Request a license registered for your computer
- On the Windows taskbar, click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager(or Services application -> Utilities -> License -> License Manager (NemSLock)).
When running Windows Vista, start License Manager as the system administrator: click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager.
Click License Managerwith the right mouse button. On the shortcut menu, click Run as administrator.
- Select the seat you want to register so that it is highlighted in blue.
Note:You can only register seats you have purchased. If you can see only seats with numbers between 90 and 99 (= trial licenses for temporary use), you first need to install the personal license for temporary use.
- Click License requestat top left.
The License Request Wizardstarts. The Welcome to the license request wizarddialog box provides information on the steps that follow.
- Click Next >.
The Customer detailsdialog box opens.
Note: Editing customer details requires administrator privileges. If you do not have these privileges, you will see a corresponding message. Cancel NemSLock License Manager and start again by selecting the Run as administrator option on the shortcut menu.
- Enter the necessary details:
- If the Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF), you selected the Trial license for temporary useoption when you installed Allplan.
In this case, install the personal license for temporary use before you create the registration request.
- If Client IDand CD Keydo not match the numbers printed on your delivery note (for example, typing errors, small letters and capital letters mixed up), you can enter Client ID and CD Key manually.
- Fill out all the fields.
Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.
Note:Check the entries for Client ID(customer number) and CD Key , making sure these numbers are the same as those printed on the delivery note you received from Allplan. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.
Tip: You can also find these numbers in the personal license file for temporary use (*_psd.nslock). Open the license file in an editor and scroll down to the end of the file. You can then copy the license codes displayed after CUSTOMERand CDKEYto the Clipboard and paste them into the appropriate boxes.
- Click Next >.
- Select the Program, Versionand Seatand click Next >.
Note: If the Client IDis invalid (for example, when you use a trial license) you cannot confirm the dialog box by clicking OK. Instead, you will see a corresponding message.
- Specify how to send the registration file and click Next >.
Start email program ...
The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.
Save the registration file ...
The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.
In addition, you can see the data that were written to the registration file.
- Click Finish.
- Click Close to exit NemSLock License Manager.
You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.
Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read. If you have any questions or need more information, please contact Allplan directly.
2. Install the license file
Shortly after you sent the registration request to 'email@example.com' as described in step 1, the final license file will be sent to the email address you specified in the registration request.
Install this license file as follows:
- Save the license file to any folder on the hard disk.
If the license comes as a zip file, extract it.
- Next, install the license file by double-clicking it ("customer#_seat.nslock").
Confirm the dialog box.
- As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
Click "Install - Install license" at top left in Nemetschek SoftLock License Manager and select the license by clicking "Browse...".
Click "Finish" to complete the installation process.
Do not use the same computer to register several license files for different seats. This would connect the seats. You cannot separate the seats again without the help of technical support.
Can I run Allplan on Apple computers?
You have to options for running Allplan on Mac computers: natively using Boot Camp or virtually using Parallels Desktop. Please note that Allplan supports Boot Camp only. For installations with Parallels Desktop, we merely offer an installation guide ("Allplan On Mac", see below).
- MacBook Pro or iMac
- Intel Core i5 or i7 Processor
- 4 GB RAM
- 20 GB free hard disk space
- AMD or Nvidia graphics card
- Mac OS X Mountain Lion 10.8
- Windows 7, 64-bit, Service Pack 1
In addition when using Boot Camp:
- Boot Camp Windows installation
- A blank CD or DVD
- The function of the DEL key needs to be moved to an existing key; otherwise, logging on to Windows requires an external keyboard.
In addition when using Parallels Desktop:
- Parallels Desktop 8 for Mac
- A license for Parallels Desktop 8 (you can request a trial license for Parallels Desktop while installing)
- Allplan On Mac setup file; you can download this file from Allplan Connect: connect.allplan.comde/support/downloads.html
- Windows 7 Professional 64-bit license and DVD
- Allplan 2012-1 DVD or download
- You can find further information on Allplan On Mac at:https://connect.allplan.com/de/more/allplan-on-mac.html
There is no provision for a direct installation under Mac OS.
We kindly ask you to understand that Allplan cannot provide support for installing Boot Camp.
An installation with Parallels Desktop is subject to the following conditions and restrictions:
- The Allplan On Mac software is free to download.
- Setup is offered as a "technology demo".
- As this is a technology demo, Allplan does not assume any responsibility or liability for the reliability of the complete system in any environment; nor does it provide any technical support.
- There may be some restrictions in conjunction with some hardware combinations.
We tested the following constellations: Windows 7 64-bit | Parallels 8+9 | Allplan 2013-1
Allplan 2014-1 runs with Parallels 9.
How can I use data from the "Shell" module in Allplan 2017 and later?
Data conversion in Allplan 2017
Allplan 2017automatically converts shell data from earlier versions the first time you open the project or *.ndw file in question.
Alllayouts you created ofgeneral arrangement drawings and reinforcement drawings stay as they are!
The 3D reinforcement modelstays as it is!
Theshell entitybecomes a 3D solid.
The views and sections(including reinforcement) become 2D elements and text.
Editing the data
As the old shell entitybecomes a 3D solid(construction lines) and the 3D reinforcement model stays as it is, you can create new associative views and sections from the model data.
Before you can do this, you need to assign "normal" format properties to the 3D solid created from the shell entity, as you cannot create associative views and sections from a solid in construction line format.
You canplace, modify and labelthe reinforcement without any restrictions. You can create schemas, legends andreportsas usual.