Результат поиска

1 - 2 (2)
  • 1
Версия:  Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 13.05.2020

Question:

The windows for options and the window for IFC import and export are closed immediately when opened. How can this issue be solved?



Answer:


1. HP computer

If you are using an HP (Hewlett-Packard) computer, please take these steps. Otherwise proceed to number 2.

Check whether the security software "HP ProtectTools" is installed on this computer. If yes, then uninstall "HP ProtectTools". This software suite consists of several progams. In most cases, these programs are:

  • HP ProtectTools Device Access Manager
  • Embedded Security for HP
  • Face Recognition for HP ProtectTools
  • File Sanitizer For HP ProtectTools
  • Privacy Manager for HP ProtectTools
  • Theft Recovery
  • Drive Encryption for HP ProtectTools
  • HP ProtectTools Security Manager



It is possible that more or less HP software than the listed is installed. When you uninstall the "HP ProtectTools Security Manager", no other dependent software should be listed during uninstallation.

If there is dependent software listed during uninstallation, please uninstall these programs first. As the last step, "HP ProtectTools Security Manager" should be uninstalled.

An example message, listing dependent software which is still installed:




Important notice: Please restart the computer to complete uninstalling the software.




2. Dell computer

If you are using a Dell computer, please take these steps. Otherwise contact the Allplan support.

Check whether the security software "Dell Data Protection" is installed on this computer. If yes, then uninstall "Dell Data Protection". This software suite consists of several progams. In most cases, these programs are:

  • Dell Data Protection | Security Tools Authentication
  • Dell Data Protection | Security Tools


It is possible that more or less Dell software than the listed is installed. When you uninstall the "Dell Data Protection", no other dependent software should be listed during uninstallation.

If there is dependent software listed during uninstallation, please uninstall these programs first. As the last step, "Dell Data Protection" should be uninstalled.

An example message, listing dependent software which is still installed:




Important notice: Please restart the computer to complete uninstalling the software.




Notes:

HP ProtectTools Security Suite was developed by McAfee in cooperation with HP. It is pre-installed on most HP business notebooks and on some HP desktop computers.

HP ProtectTools are using Full Volume Encryption (FVE) by McAfee Safeboot, which changes the Win32 API behaviour. This causes problems in Allplan.

Also Dell is using similar mechanisms for the Dell Data Protection Suite. They have the same influence on Allplan.

Please note that these programs in either case have negative effects on stability and functionality of Allplan, even if you might not notice it (example: working options and IFC windows in different Allplan version).


Загрузка PDF  FAQ_EN_Options_window_IFC_window_closed_immediately_...
Версия:  Allplan 2013 / Allplan 2012 / Allplan 2011  | Последнее изменение: 11.12.2015

Question:

How can I use Allplan to create PDF documents (Portable Document Format) that can be opened and viewed using PDF viewers such as the free Acrobat Reader?



Answer:

You can export PDF files directly from Allplan.
In addition to the design, bitmap areas and text, the direct export tool transfers layers, OLE objects, transparency and gradients.
Of course, you can also use external programs such as Adobe PDF and FreePDF to create PDF files. However, these programs do not provide all the options mentioned above. For example, transparency is not transferred.

Allplan provides the following options for exporting PDF data:

1. using the layout editor:
Create -> Plot Layout -> Export PDF Data

2. using the print preview:
Click the Export PDF Data icon in the toolbar at the top

3. exporting 3D PDF files from the animation window:
You can create a PDF file from the animation window. This file contains the 3D model displayed in the animation window.
This option is not described any further in this FAQ.


General settings:

When exporting PDF data, you specify the file name in a dialog box, where you can also make basic settings for the PDF file:

  • Resolution (in dpi)
  • Document size (paper size (with margin) or printable area (without margin))
  • Entire layout content
  • Archiving format PDF/A 1a
  • Export layers
  • Embed TrueType fonts
  • ...
  • Add to file (first select an existing PDF file in this dialog box and then select this option -> the PDF file is attached as a new page to the existing file)
  • Grayscale (version 2011 and later)
  • Open file with associated application (should be selected. After you have created it, the PDF file automatically opens in this application so that you can check it.)



Note on the page format (new in Allplan 2011):

In Allplan 2011 and later versions, you set up a page in Allplan. The page size should be used as the size for the PDF file.
You need to exactly define the size you require for the page.

To use the page size for exporting the PDF file, select the following options:

  • Select 'Paper size (with margin)'.
  • Clear the 'Entire layout content' check box, if necessary.



Notes on 1. settings in the Plot Layout module:

You can make advanced settings in the "Plot Layouts" dialog box.
The following settings are used for exporting PDF data:

  • Plot elements / options (Selection tab)
  • Paper format and orientation (Output tab); see the above notes on the page format.
  • Resizing: Resizing factor, resize pen thickness and rotation by 90° (Settings tab)
  • Pen and color assignments... (Settings tab)
    -> Line thickness for monochrome output and line colors for color output
    -> Line display in color, black or using shades of gray (can only be changed when you select a color printer beforehand)
    -> Gamma correction
  • No pen optimization/ Use one pen only (number:)
  • Plot profile (Settings tab)




Notes on 2. settings in the print preview:

The PDF file is exported as it is currently displayed on screen.
You can make the settings that are used for the "Print" tool directly in the print preview (Display tab in the Print Preview Options).



Notes:

To export PDF data in color, you need to install a printer driver that supports color and select this driver in the layout before you start exporting the PDF data.
It is advisable to install a printer driver for a large-format color plotter such as an HP DesignJet even if your office is not equipped with a large-format printer/plotter.
[Install as a local printer/ without plug & play, port: FILE, do not share the printer, do not print a test page.]

Загрузка PDF  FAQ_EN_Creating_PDF_files.pdf
1 - 2 (2)
  • 1
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
https://campus.allplan.com/ uses cookies  -  More information

Accept