Search Result

21 - 30 (40)
Version:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018  | Last modified: 25.09.2020
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

After updating Codemeter Runtime on the server, the client computers do not receive a license from the license server anymore.
How can this be fixed?


Answer:

Please check if the setting for visibility of licenses in the network is still set.
Proceed as follows:
Start the CodeMeter Control Center on the server

To do this, use the Windows start menu and select CodeMeter -> CodeMeter Control Center. As an alternative, open Search by clicking the Search button on the Start screen: enter Codemeter and press ENTER. A dialog box opens. Click WebAdmin at bottom right.

Or
Enter Localhost:22350in the address bar of your browser.

  • Select Configuration -> Server -> Access server in the Network server area and click Activate.
  • Click Apply.


Download PDF  FAQ_EN_No_license_on_client_after_update_of_Codemter...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 08.05.2019
2 user(s) found this FAQ helpful

Question:

I have installed Allplan using the temporary Softlock license ("customer#_seat_psd.nslock") and "Trial" is displayed for its status in the License Manager.
How can I register this license?



Answer:

You use License Manager to create a registration request and send it by email to register@nemetschek.de.
In response, you get a final license file. Installing this license removes the lime limit.
Below is a description of the necessary steps.



Notes:

  • Using the temporary license, you can start Allplan as a trial version. You can work with Allplan without any restrictions for 30 days.
    After expiration of this period, Allplan starts as a viewer only. However, you can still request and install the final license.
  • When running Windows Vista, start Nemetschek License Manager as the administrator:
    Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
    Click "License Manager" with the right mouse button and choose "Run as administrator" on the shortcut menu.




How to proceed:

1. Request a license registered for your computer

  1. On the Windows taskbar, click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager(or Services application -> Utilities -> License -> License Manager (NemSLock)).

    When running Windows Vista, start License Manager as the system administrator: click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager.
    Click License Managerwith the right mouse button. On the shortcut menu, click Run as administrator.
  2. Select the seat you want to register so that it is highlighted in blue.

    Note:You can only register seats you have purchased. If you can see only seats with numbers between 90 and 99 (= trial licenses for temporary use), you first need to install the personal license for temporary use.
  3. Click License requestat top left.

    The License Request Wizardstarts. The Welcome to the license request wizarddialog box provides information on the steps that follow.
  4. Click Next >.
    The Customer detailsdialog box opens.

    Note: Editing customer details requires administrator privileges. If you do not have these privileges, you will see a corresponding message. Cancel NemSLock License Manager and start again by selecting the Run as administrator option on the shortcut menu.
  5. Enter the necessary details:

    - If the Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF), you selected the Trial license for temporary useoption when you installed Allplan.
    In this case, install the personal license for temporary use before you create the registration request.

    - If Client IDand CD Keydo not match the numbers printed on your delivery note (for example, typing errors, small letters and capital letters mixed up), you can enter Client ID and CD Key manually.

    - Fill out all the fields.

    Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.

    Note:Check the entries for Client ID(customer number) and CD Key , making sure these numbers are the same as those printed on the delivery note you received from Allplan. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.

    Tip: You can also find these numbers in the personal license file for temporary use (*_psd.nslock). Open the license file in an editor and scroll down to the end of the file. You can then copy the license codes displayed after CUSTOMERand CDKEYto the Clipboard and paste them into the appropriate boxes.
  6. Click Next >.
  7. Select the Program, Versionand Seatand click Next >.

    Note: If the Client IDis invalid (for example, when you use a trial license) you cannot confirm the dialog box by clicking OK. Instead, you will see a corresponding message.
  8. Specify how to send the registration file and click Next >.

    Start email program ...
    The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

    Save the registration file ...
    The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

    In addition, you can see the data that were written to the registration file.
  9. Click Finish.
  10. Click Close to exit NemSLock License Manager.


You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read. If you have any questions or need more information, please contact Allplan directly.



2. Install the license file

Shortly after you sent the registration request to 'register@nemetschek.de' as described in step 1, the final license file will be sent to the email address you specified in the registration request.
Install this license file as follows:

  • Save the license file to any folder on the hard disk.
    If the license comes as a zip file, extract it.
  • Next, install the license file by double-clicking it ("customer#_seat.nslock").
    Confirm the dialog box.
  • As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
    Click "Install - Install license" at top left in Nemetschek SoftLock License Manager and select the license by clicking "Browse...".
    Click "Finish" to complete the installation process.


Note:

Do not use the same computer to register several license files for different seats. This would connect the seats. You cannot separate the seats again without the help of technical support.

Download PDF  FAQ_EN_Nemetschek_Softlock_-_first_steps.pdf
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 08.05.2019
1 user(s) found this FAQ helpful

Question:

I would like to run the program on a different computer. How can I transfer the NemSLock license?



Information:

You can use the "Export/import - license transfer" tool to transfer an Allplan license temporarily from the registered computer to a different computer (a laptop, for example).
Licenses are always transferred between two specific computers. When you export the license from the source computer, you need to precisely specify the destination computer to which the license is to be transferred. A registered, running Allplan version must be installed on the source computer. At least a trial version of Allplan must be installed on the destination computer. Whether this trial version is still valid or has already expired is irrelevant.



Note:

The license should notbe transferred temporarily when you have bought a new computer and you want to run the program permanently on this new computer. The temporary license transfer is limited to 30 days. For more information please consult the online Help.


Answer:

Open the Services application -> Utilities -> License -> License Manager (NemSLock).

Select theExport/import - license transfertool.

You can choose between a transfer that is "Directly on the network" and one that is "Indirectly by transfer file". The direct transfer requires that the source computer and the destination computer are connected via a network. As opposed to the indirect transfer, you can also exchange licenses when you opt for the direct transfer.


A. Transferring the license directly

Preparing the destination computer for the license import

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import licenseoption.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Using the source computer to export the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Export license option. Enter the computer name or IP address of the destination computer. For the time limit, specify after how many days the license file is to be available at the source computer again. This will happen automatically as soon as this period expires.
  5. Click Finish.


Returning the license file to the source computer before the time limit expires

Source computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import license option. The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Return license option. The "Return License" dialog box appears.
  5. Enter the name or IP address of the computer to which you want to return the license and click Return. A message appears announcing that the license has been exported to the destination computer.
  6. At each computer, clickOKto confirm.



B. Exchanging licenses while online

Specify which computer is to be the master and which computer is to have a subordinate role (slave).

Preparing the slave for the license exchange

  1. At one of the two computers, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Select the "Nemetschek Softlock License Manager" tab. Click the Export/import - license transfericon at the top.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses -> Slave.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.



Exchanging license using the master

  1. Using the other computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses-> Master. Enter the computer name or IP address of the slave. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  5. Click Finish.


Returning the exchanged licenses before the time limit expires

  1. Using the slave, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Reverse license exchange -> Slave -> Reception.
  5. Using the master, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  6. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  7. Select Directly on the network.
  8. Select Reverse license exchange -> Master. Check whether the proposed computer name or IP address of the slave is correct.
  9. Click Reverse.



C. Exchanging licenses while offline


Creating computer ID files for the source and destination computers

First you need to create two computer-specific ID files: one for the source computer and one for the destination computer. These files are valid until you change the hardware of the corresponding computer. If the hardware changes (adding a hard disk or a DVD/CD drive, for example), you need to create a new computer ID file.

To create a computer-specific ID file:

  1. Start the Nemetschek License Manager by clicking Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top and select Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select Create computer ID file.
  4. Click Browse...and specify the path where you want to save the computer ID file.
  5. Click Finish.


Note:

The folder you select must exist. The computer-specific COMPUTERNAME.nslid file is created in this folder.
If the source computer and the destination computer are connected on the network, you can specify the source and destination paths over the network without having to use storage media or email attachments.

Exporting the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Export license option. The Import Computer IDdialog box is displayed.
  4. To export the license for a specific destination computer, do the following: Click Browse..., and select the computer ID file of the destination computer (name_of_destination_computer.nslid) and clickOpen. Click Next.
  5. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  6. Click Create License Transfer Fileand clickOKto confirm. A file (name_of_destination_computer_date_time.NslTransfer) is created for the destination computer.


As soon as you have exported the license, Allplan no longer starts on the source computer.

Importing the license file into the destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "License Transfer" dialog box is displayed.
  3. Select the (Re-)Import license option. Click Browse....and select the license file you want to import. Click Open.
  4. Click Import and clickOKto confirm.



Note:

Each license file can be imported just once. For this reason, the file name is preceded by the word "used_" after the import.

Returning the license file to the source computer before the time limit expires

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Return license option.
  4. Click Browse...and select the path where you want to save the license file returned. Then click OKto confirm.
  5. Click Return and clickOKto confirm.
  6. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  7. Select the "Nemetschek Softlock License Manager" tab. Click License transfer -> Offline license transfer. The "Offline License Transfer" dialog box is displayed.
  8. Select the (Re-)Import license option.
  9. Click Browse...and select the corresponding license file. Then click Open.
  10. Click Import and clickOKto confirm.
Download PDF  FAQ_EN_Transferring_NemSLock_licenses_temporarily_(i...
Version:  Allplan 2015  | Last modified: 08.06.2020
10 user(s) found this FAQ helpful

Question:

An error occurs during installation of hotfix 2015-1-11 or later. What can I do?



Answer:

To install this and future Allplan 2015 hotfixes using auto-update, you must update the installation service. Requirement: Allplan 2015-1-10 is installed.

1. You can find a batch file attached to this FAQ. Save and extract this file and execute it on every Allplan workstation (right-click this file -> select "Run as administrator" on the shortcut menu...). The batch file looks for the "InstallAULService.exe" file in the local PRG folder of the Allplan installation and runs it as the administrator. This updates the installation service.
Be careful: this requires administrator privileges.

If your e-mail program blocks this file, you can also download it from our FTP server.
Enter the following address in WindowsExplorer (do not use Internet Explorer!):

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/2015/Hotfix/2015-1/UpdAUL.bat


2. Auto-update should now work as usual.



Note:


As an alternative, you can also install the full version of Allplan 1/12/2015. This also updates the installation service.
You can download the full version fromhttps://connect.allplan.com/deor from our FTP server:

To access our FTP server, you require a current Windows operating system. Do the following:
Enter the following address in Windows Explorer (do not use Internet Explorer!):

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/2015/CD/DoWn-allplan2015-1-12-cad.zip

Download the corresponding ZIP file and extract it. Right-click the exe file and start it using "Run as administrator".
Install the update.

Download PDF  FAQ_EN_Automatic_update_fails_to_install_hotfix_2015... Download UpdAUL.zip
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011 / Allplan 2009  | Last modified: 11.07.2016
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

I have received a license for my dongle. How can I install this license?



Solution:

1. License on hard disk (or network drive)
Copy the license files to any folder, for example, C:\License, and select this folder when you install the license.

a. During setup
While installing Allplan, select the 'License file from any folder' option and choose the folder with the license files.

b. Installing a license later
To install the license, select
Services application -> Utilities -> License -> Install HARDLOCK License
A dialog box appears. Select the folder with the license files.

2. License by email
If you have received the license by email, save the attachment to any folder, for example, C:\License, and proceed as described in step 1.
If the licenses are compressed (*.zip), extract them first using an appropriate program, such as Winzip (www.winzip.de).

3. License on storage medium (CD or USB stick)
You can also copy the license files to a storage medium (USB stick, for example) or write them to a CD and then proceed as described in step 1b.



Notes:

  • If you have received a license for a license server, read the instructions in the documents for the license server. If any questions arise, contact technical support.
  • Keep the license in a safe place as you may need it for future installations or if there are problems.
  • Make sure you install the license that is appropriate to the dongle you use, as each license matches only a single dongle. time.
  • Setup needs to access the license file(s) during the entire installation process. It is therefore not possible to read the license file(s) from a CD and then remove this CD during installation. You are advised to copy the license file(s) to a folder on the hard disk.
Download PDF  FAQ_EN_Installing_license_for_dongle.pdf
Version:  Allplan 2017 / Allplan 2016 / Allplan 2015 / Allplan 2014 / Allplan 2013  | Last modified: 19.03.2018
1 user(s) found this FAQ helpful

Question:

What effects do Windows 8.1 updates have on Allplan versions?


Answer:

Allplan versions 2014-0-2 and later are running on Windows 8.1.
To make sure that Allplan runs smoothly after you have updated to Windows 8.1, you need to do the following:

1st step: backing up and restoring Allplan user settings

Prior to installing the Windows update, select
Services application -> Data Backup -> Create -> Entire folders -> Private settings -> Full
to back up your own Allplan user settings.

If you find out that some settings are missing after you have updated to Windows 8.1, you can select
Services application -> Data Backup -> Import -> Entire folders -> Private settings -> Full
to restore these settings.

In addition, you are strongly advised to back up and archive all the data before you update the operating system!



2nd step: restoring Allplan licensing

Depending on the licensing system you use, there are different issues to bear in mind.

NemSLock
After the Windows update you need to fix Nemetschek Softlock License Manager as described in the following document:
https://connect.allplan.com/de/faqid/20131024085525.html


Hardlock
Uninstall the hardlock driver (Sentinel runtime driver) during the update to Windows 8.1 as described below:
https://connect.allplan.com/de/faqid/20131028131634.html

Install the latest hardlock driver after the Windows update. You can find the driver and the instructions using the following link:
https://connect.allplan.com/de/faqid/20131028125253.html

Download PDF  FAQ_EN_Windows_81_update.pdf
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Last modified: 23.09.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:
I purchased a new license and received a Product Key for Allplan. However, I work with an earlier Allplan version. How can I install and license Allplan 2015 or an earlier version despite the new license?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use Softlock (NemSLock) or hardlocks with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

For licensing earlier versions, you require the Client ID and CD Key. You can find this information in the delivery note or invoice. Instead of a temporary license, use the appropriate trial license to install Allplan 2015 or an earlier version. Then generate a registration request to license and activate the modules you purchased.

Note:
If you use a license server for which you purchased an additional license, please read the separate document or contact support.de@allplan.com. We will show you how to add the new license to the license server.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Allplan Connect:
https://connect.allplan.com/de/support/downloads.html


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Request a license registered for your computer
The trial license is valid for 30 days. It is not personalized.
Consequently, you have to enter your personal data manually when generating the registration request.
You can find the required Client ID and CD Key in the delivery note or invoice.

To generate a registration request, do the following:

Open the License Manager (Service application -> Utilities- > License -> License Manager).
Select the license entry for your seat and click 'Request license'. Please follow the instructions displayed on screen.

Note: Editing customer details requires administrator privileges. The system will issue an appropriate message. Close NemSLock License Manager and start the Services application again. To do this, click the Services desktop icon with the right mouse button and select 'Run as administrator' on the shortcut menu.


Enter the necessary details:
The Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF).

For the Client ID, enter your customer number. You can find your customer number in the letteror delivery notethat came with Allplan.
For the CD Key, enter your CD Key, which you can also find in the letter or delivery note. Make sure you use small letters and capital letters accordingly.

Note:You can find the Client ID and CD Key at top left in the delivery note. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.


Fill out all the fields. Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.
Click Next >

For the seat, change the number 94 to the license you purchased, for example, 02, 03 or 04.
Specify how to send the registration file and click Next >.

Start email program ...
The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

Save the registration file ...
The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

In addition, you can see the data that were written to the registration file.

  1. Click Finish.
  2. Click Close to exit NemSLock License Manager.

You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read.


3. Installing the license file
Shortly after we received the registration request, we will send you the final license file to the email address you specified in the registration request.
Install this license file as follows:

  • Save the license file to any folder on the hard disk.
    If the license comes as a zip file, extract it.
  • Next, install the license by double-clicking the license file ("customer#_seat.nslock").
    Confirm the dialog box.
  • As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
    Click "Install - Install license" and then "Browse..." to select the license.
    Click "Finish" to complete the installation process.
  • Your registered license is displayed in the License Manager. Clear the check box for the trial license (for example, seat 94 or 98). Make sure your registered license is the only license that is selected.




Download PDF  FAQ_EN_Installing_an_earlier_version_with_NemSLock_i...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013  | Last modified: 17.12.2015
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

After I have installed Allplan, the program no longer accepts the parallel dongle connected to the computer. Allplan starts as a viewer.
What can I do?



Answer:

The dongle query changed with Allplan 2013. The dongles causing these problems are usually parallel dongles that are connected to a port (LPT3) that was added later.

Determine the I/O range of the LPT port:

Open the Control Panel and then the Device Manager.

  • Select "Ports -> ECP Printer Port" for a direct parallel port.
  • Select "Multifunction adapter" and the corresponding port for a parallel adapter (e.g., SUNIX).


Properties -> Resources

Note down the first value in the first line below resource settings.

For example:

Resource typeSetting
I/O range0378 – 037F
I/O range0778 – 077F



In this example, the value is 0378.

Open Allplan's license settings:
Services application -> Utilities -> License -> License Settings

Switch to:
License check tab -> Specify searching order ... (or environment variable...)

Enter theI/O value followed by a "p"in the "HL_SEARCH=..." box. For example,
0378p

Click "OK" and then "Apply".


Download PDF  FAQ_EN_Parallel_dongle_is_no_longer_accepted_after_i...
Version:  Allplan 2016  | Last modified: 27.02.2018
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I borrow a license for a client temporarily from the license server?



Answer:

Hotfix 2016-1-4 enables you to temporarily borrow (import) licenses from the license server.
If you want to use this function, note the following points:


Borrowing licensesrequires the following steps. Make sure you do not change the order of these steps. Otherwise, you cannot borrow licenses.

  1. Install Allplan 2016-1-4on the client.
  2. Go to the server and update the software for the license server to 2016-1-4(Build-ID 1.614.x.x ).
  3. Go to the license server and update the licenses.


You can find a detailed description of each step in the following section.

1. Install Allplan 2016-1-4
Make sure all clients are equipped with Allplan 2016-1-4 or later.
If this is not so, install a full update or a hotfix. You can do this manually or use auto-update.
You can find more information in Allplan Connect:
https://connect.allplan.com/en/faqid/20110412100857.html

To install manually
Download the current hotfix(es) manually. To do this, log in to Allplan Connect https://connect.allplan.com/de/support/downloads.htmlad go to Support - Downloads - Latest Hotfixes.
You can also download the hotfixes from our FTP server.
To access our FTP server, you require a current Windows operating system. Do the following:

Enter the following address in Windows Explorer (do not use Internet Explorer!):
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de

You can find the hotfixes in this folder: /download/Allplan/2016/Hotfix/


2. Update the license server 2016-1-4(Build-ID 1.614.x.x )
Not only Allplan but also the license server requires the new version. Check the version of the license server. You can find detailed information on the version (Build-ID) at bottom left in the License Settingsprogram.
Make sure the version of the license server you use is at least 1.614.x.x. If you cannot see the Build-ID, you work with an older license server.
If this is so, update the license server. Download the software for the license server from Allplan Connect or from our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2016/DoWn-2016-License_Server_Setup.zip

Start the new License Server Setupon the server or computer you use as the license server. Right-click the *.exe file and select 'Run as administrator' on the shortcut menu.

  • Click Install.
  • Click Exit.

If you have not worked with the license server before or if you have not switched to Allplan 2016 until now, you can find detailed information in Allplan Connect:
https://connect.allplan.com/en/faqid/20150618084450.html


3. Update the licenses
You must update your license before you can use this new function for borrowing licenses.

To update a license on the license server

  • Start the License Settingsprogram on the server.
  • Click License activationon the left. Then click the license you want to update so that this license is highlighted in blue.
  • As you can see, the 'Update license' function is now available.
  • Click Update license.
  • If your license includes configurations for several seats, you must update each license separately.




To borrow a license, do the following:

Notes:
You cannot borrow licenses on the license server. You can do this only at the clients.
You can only borrow and return a license if the client is connected with the license server.
Computers that are not on the company network must use a VPN connection to access the server.

At the client:

  • Open the 'License settings' dialog box: Services application -> Utilities -> License settings.
  • Click License selectionon the left. Then click the license you want to borrow so that this license is highlighted in blue.
  • If this license is a license of the license server, the Todaybutton in the 'Borrow license for:' area is no longer grayed out.
  • This button always shows the preset period of time. The default setting is Today.This button is divided into two parts. If you want to change the period of time, click the arrownext to Today. You can now choose from various options.
    Note: When you select 'Today', the license will be available again for all Allplan users on the server tomorrow.
    When you select a number of days, borrowing will always be valid for 24 hours. For example, you borrow a license for 1 day and borrowing starts at 3 o'clock in the afternoon, the license will not be available on the server until 3 o'clock in the afternoon.
  • Click Today(selected period of time) to borrow the license immediately.


You can immediately see the borrowed license in the license selection below your computer name. Click the blue information button to get details about this license. For example, you can see when the borrowed license will automatically be returned to the server.

  • If you want to return the license to the server before the time period expires, click the license again so that it is highlighted in blue. The Return licensebutton is now available. Click Return licenseto immediately return the selected license to the server.
Download PDF  FAQ_EN_License_server_-_borrowing_licenses_temporari...
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Last modified: 23.09.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

I purchased a new license and received a Product Key for Allplan. However, I use earlier Allplan versions with NemSLock server in my office. How can I install Allplan 2015 or an earlier version despite the new license? How can I activate the license on NemSLock server?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use NemSLock server with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Downloading from Allplan Connect:
https://connect.allplan.com/de/support/downloads.html

FTP server:
Copy this link and paste it into the address bar of Windows Explorer. Then press ENTER.
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de
This opens the folder on our FTP server.

Go to /download/Allplan/2015/CD (choose the path in accordance with the version you need) and select the appropriate file. Then click Edit -> Copy (Ctrl+C).
Switch to a folder on your computer and select Edit -> Paste (Ctrl+V).
Extract the ZIP file. Right-click the EXE file and select "Run as administrator".
Deactivate the virus scanner during installation.


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Use NemSLock server to request a registered license for the new seat

If you have not used a license server until now, install the license server using the trial license for NemSLock Server.

Installing NemSLock Server

  • Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

  • The trial license is also on the FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/Allplan 2015 Nemslock Server Trial.nslsrv

  • Select the trial license file for NemSLock Server. This license is valid for 30 days, but it includes only seat. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below).
  • Select the full installation.
  • If the service does not start automatically after Setup, select Control Panel -> Administrative Tools -> Services and start the Nemslock Server 2006 service.



Registering licenses

  • Open NemSLock 2006 Server Consoleby clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
  • Switch to Moduleson the left.
  • Select one of your seats.
  • Click the Registration request (register.txt)button.
  • Click Edit.
  • Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OKto confirm.
  • Click Create registration request. Windows Explorer opens and shows the register.txt file.
    If you have closed Windows Explorer, you can find the file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is
    C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License.
  • Use an editor to open the new register.txt file.

You can find the entry for your seat in line @23@seat:. Change it and enter your new seat number instead. For example, if you purchased seat 08, change the entry to @23@seat: 08. Save the file.

  • You can now use all the options provided by Windows Explorer to copy the registration file to a computer with Internet connection. You can do this on the network or you can use a USB stick. You can then email the file to us.
  • Send the email with the registration request to register@nemetschek.de.
  • You will promptly receive your registered license for the new seat.



Installing licenses
Exit Allplan on all workstations.

  • Open NemSLock 2006 Server Console.
  • Click Stop serveron the left.
  • Switch to Moduleson the left.
  • Click Browse and select the registered license file.
  • Click Install license file.
  • After this, you can start the server again by clicking Start server.



Note:

If you purchased several new licenses, you have to generate and send a separate registration request for each seat. Just repeat the steps described above. You will then receive a registered license file for each seat. You must install each file.

Download PDF  FAQ_EN_Installing_an_earlier_version_with_NemSLock_s...
21 - 30 (40)
https://campus.allplan.com/ uses cookies  -  More information

Accept