Search Result

31 - 40 (45)
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017  | Last modified: 25.11.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

Whenever I try to create a project, the New Project, Open Projectdialog box does not open.
If I try to open ProjectPilot, the following message appears:Unable to create ProjectPilot control.What can I do?



Answer:

Some important entries are not defined in the Windows Registry.

Close Allplan and do the following:

Services application -> Service -> Windows Explorer -> CAD program folder -> PRG

Find the NemProjectPilot10.exefile and start it as the administrator. To do this, right-click this file -> Run as administrator.
Start Allplan and open ProjectPilot by clicking File -> ProjectPilot. Then create a new project.
After this, open New Project, Open Project. This should work without problems.



Note:

You require administrator privileges to write to the registry.

Download PDF  FAQ_EN_Projects_cannot_be_created_and_ProjectPilot_d...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013  | Last modified: 30.11.2017 17:22
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How to install and run NemSLock Server?



Answer:

Before installing, check whether the package you received includes the following items:

  • Temporary licenses for NemSLock Server, e.g. 1234567a_001_psd.nslsrv
  • Temporary licenses for clients, e.g. 1234567a_001_psd_client.nslock



How to install NemSLock Server

  • Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

  • Select one of the temporary license files for NemSLock Server. These licenses are valid for 30 days. However, each license includes only one seat of each configuration purchased. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below). If you purchased a configuration for one seat only, you will, of course, receive only one temporary license.
  • When you opt for the “Custom” setup type, you can choose between the following program features:
    Console
    You can use this program to administer NemSLock Server. You can also install the console on more workstations so that you can administer the server from a number of different locations. However, you can only connect one console to the server at any one time.
    Server
    The actual license server.
    Logviewer
    This tool analyzes the log files of NemSLock Server.

By default, Setup installs all these features.
If you have several temporary licenses for NemSLock Server, use the server console to install the remaining licenses after the installation. The procedure is described in the section "How to install licenses".


How to register licenses

  • Open NemSLock 2006 Server Console by clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
  • Click "Modules" on the left.
  • Select the seat you want to register. If your license includes configurations for several seats, you must send a separate registration request for each seat. You will then receive a registered license file for each seat. You must install each file.
  • Click the "Registration request (register.txt)" button.
  • Click "Edit".
  • You must fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OK to confirm.
  • Click "Create registration request". Windows Explorer opens and shows the register.txt file. If this window is closed, you can find this file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is:
    C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License
  • Now you can use all the options provided by Windows Explorer to copy the registration file to a computer with Internet access on the network. Alternatively, you can also use an USB stick. You can then email this file to us.
  • Send the email with the registration request to register@nemetschek.de



How to install licenses

  • Open NemSLock 2006 Server Console.
  • Click "Stop server" on the left.
  • Click "Modules" on the left.
  • Click "Browse" to navigate to the registered license file.
  • Click "Install license file".
  • After this, you can start the server again by clicking "Start server".



How to set up users (optional)

  • predefined user ALLis created automatically. If there is no other user, each user is given the privileges of the user ALL. By default, this user can use all licenses but cannot check out any licenses. By double-clicking the user, you can change the user's privileges.
  • predefined user ALLallows all users to use licenses. In order to do this, the users must be able to access the server. You do not need to create individual user profiles until you want to assign specific rights to individual users or limit access to selected users. predefined user ALL. If you want to work only with individual users, you should deactivate the predefined user ALL by revoking the user's right to use licenses.
  • predefined user ALL has administrator privileges unless another user is created and appointed as the administrator. As soon as you have appointed an administrator, ALL no longer has administrator privileges.
  • You can enter users in the “Users.mcf” file. predefined user ALL has administrator privileges again. In addition, each user can once again administer the license server using the console.
  • The administrator user is not a special user. If there are several administrator users, only one administrator user can start the console for this license server at any one time.
  • If you are setting up users without giving administrator privileges to anyone, the program will ask you whether you want to appoint yourself as the administrator.


You can also specify a domain (user authentication for Windows server). However, this is not mandatory. If you do not specify a domain, the program uses the Windows user name for each user.

The program writes the user accounts and the associated access rights as ASCII text to the users.mcf file.

You can find this file in the \Programs folder of the NemSLock Server installation. You cannot rename, delete or move this file. If the program can no longer connect to this file, you must exit NemSLock Server, restart it and enter all users again from scratch. predefined user ALLis retained.

Note:
Experienced administrators can use the PowerShell script NemGenUsers.ps1. This file is in the \Programs folder of the NemSLock Server installation or you can find it as an FAQ in Allplan Connect:

connect.allplan.com/en/faqid/20120907161911.html



How to install and configure clients

  • Use one of the nslock license files you received to install the clients. Do not use the trial license or the license server license. It is irrelevant which of the client licenses you use, as the actual license will come from the license server later.
  • You do not need to register the clients.
  • When switching from Hardlock to NemSLock (server), you need to update the client using a nslock license file.


After having installed the client, you need to switch to the license server:

  • Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
  • If the license server window is not visible, select "Configure NemSLock Server" at the bottom. Lock this window. All you need to do is click the drawing pin icon.
  • Enter the computer name or IP address of the license server in the empty box. Then click the "Update” icon to the right.
  • Now the user can select one of the seats provided.
  • After having successfully connected to the license server, clear the check boxes for the trial licenses in the area at the top.
  • Click "Close" to complete the configuration. Now you can start Allplan.



Notes:

  • If a user selects several configurations for a seat and starts Allplan, the license server will provide the required licenses; in other words, starting Allplan once might require two licenses. Consequently, fewer licenses are available to other users.
  • 2014-1 and later: If the latest version of License Manager is installed (file version 1. 0. 26. 153 or later, see License Manager- Options- System), you can also select several licenses. If one of the selected licenses is currently being used by someone else, the program will automatically select the next available license.
  • Clients communicate with the server by TCP/IP via port 10977. So you need to configure the firewall accordingly.
  • The license server and the licenses are downward compatible; they can be used in conjunction with older Allplan versions.
Download PDF  FAQ_EN_Installing_and_configuring_NemSLock_Server.pd...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 08.05.2019
2 user(s) found this FAQ helpful

Question:

I have installed Allplan using the temporary Softlock license ("customer#_seat_psd.nslock") and "Trial" is displayed for its status in the License Manager.
How can I register this license?



Answer:

You use License Manager to create a registration request and send it by email to register@nemetschek.de.
In response, you get a final license file. Installing this license removes the lime limit.
Below is a description of the necessary steps.



Notes:

  • Using the temporary license, you can start Allplan as a trial version. You can work with Allplan without any restrictions for 30 days.
    After expiration of this period, Allplan starts as a viewer only. However, you can still request and install the final license.
  • When running Windows Vista, start Nemetschek License Manager as the administrator:
    Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
    Click "License Manager" with the right mouse button and choose "Run as administrator" on the shortcut menu.




How to proceed:

1. Request a license registered for your computer

  1. On the Windows taskbar, click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager(or Services application -> Utilities -> License -> License Manager (NemSLock)).

    When running Windows Vista, start License Manager as the system administrator: click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager.
    Click License Managerwith the right mouse button. On the shortcut menu, click Run as administrator.
  2. Select the seat you want to register so that it is highlighted in blue.

    Note:You can only register seats you have purchased. If you can see only seats with numbers between 90 and 99 (= trial licenses for temporary use), you first need to install the personal license for temporary use.
  3. Click License requestat top left.

    The License Request Wizardstarts. The Welcome to the license request wizarddialog box provides information on the steps that follow.
  4. Click Next >.
    The Customer detailsdialog box opens.

    Note: Editing customer details requires administrator privileges. If you do not have these privileges, you will see a corresponding message. Cancel NemSLock License Manager and start again by selecting the Run as administrator option on the shortcut menu.
  5. Enter the necessary details:

    - If the Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF), you selected the Trial license for temporary useoption when you installed Allplan.
    In this case, install the personal license for temporary use before you create the registration request.

    - If Client IDand CD Keydo not match the numbers printed on your delivery note (for example, typing errors, small letters and capital letters mixed up), you can enter Client ID and CD Key manually.

    - Fill out all the fields.

    Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.

    Note:Check the entries for Client ID(customer number) and CD Key , making sure these numbers are the same as those printed on the delivery note you received from Allplan. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.

    Tip: You can also find these numbers in the personal license file for temporary use (*_psd.nslock). Open the license file in an editor and scroll down to the end of the file. You can then copy the license codes displayed after CUSTOMERand CDKEYto the Clipboard and paste them into the appropriate boxes.
  6. Click Next >.
  7. Select the Program, Versionand Seatand click Next >.

    Note: If the Client IDis invalid (for example, when you use a trial license) you cannot confirm the dialog box by clicking OK. Instead, you will see a corresponding message.
  8. Specify how to send the registration file and click Next >.

    Start email program ...
    The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

    Save the registration file ...
    The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

    In addition, you can see the data that were written to the registration file.
  9. Click Finish.
  10. Click Close to exit NemSLock License Manager.


You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read. If you have any questions or need more information, please contact Allplan directly.



2. Install the license file

Shortly after you sent the registration request to 'register@nemetschek.de' as described in step 1, the final license file will be sent to the email address you specified in the registration request.
Install this license file as follows:

  • Save the license file to any folder on the hard disk.
    If the license comes as a zip file, extract it.
  • Next, install the license file by double-clicking it ("customer#_seat.nslock").
    Confirm the dialog box.
  • As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
    Click "Install - Install license" at top left in Nemetschek SoftLock License Manager and select the license by clicking "Browse...".
    Click "Finish" to complete the installation process.


Note:

Do not use the same computer to register several license files for different seats. This would connect the seats. You cannot separate the seats again without the help of technical support.

Download PDF  FAQ_EN_Nemetschek_Softlock_-_first_steps.pdf
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 08.05.2019
1 user(s) found this FAQ helpful

Question:

I would like to run the program on a different computer. How can I transfer the NemSLock license?



Information:

You can use the "Export/import - license transfer" tool to transfer an Allplan license temporarily from the registered computer to a different computer (a laptop, for example).
Licenses are always transferred between two specific computers. When you export the license from the source computer, you need to precisely specify the destination computer to which the license is to be transferred. A registered, running Allplan version must be installed on the source computer. At least a trial version of Allplan must be installed on the destination computer. Whether this trial version is still valid or has already expired is irrelevant.



Note:

The license should notbe transferred temporarily when you have bought a new computer and you want to run the program permanently on this new computer. The temporary license transfer is limited to 30 days. For more information please consult the online Help.


Answer:

Open the Services application -> Utilities -> License -> License Manager (NemSLock).

Select theExport/import - license transfertool.

You can choose between a transfer that is "Directly on the network" and one that is "Indirectly by transfer file". The direct transfer requires that the source computer and the destination computer are connected via a network. As opposed to the indirect transfer, you can also exchange licenses when you opt for the direct transfer.


A. Transferring the license directly

Preparing the destination computer for the license import

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import licenseoption.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Using the source computer to export the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Export license option. Enter the computer name or IP address of the destination computer. For the time limit, specify after how many days the license file is to be available at the source computer again. This will happen automatically as soon as this period expires.
  5. Click Finish.


Returning the license file to the source computer before the time limit expires

Source computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import license option. The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Return license option. The "Return License" dialog box appears.
  5. Enter the name or IP address of the computer to which you want to return the license and click Return. A message appears announcing that the license has been exported to the destination computer.
  6. At each computer, clickOKto confirm.



B. Exchanging licenses while online

Specify which computer is to be the master and which computer is to have a subordinate role (slave).

Preparing the slave for the license exchange

  1. At one of the two computers, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Select the "Nemetschek Softlock License Manager" tab. Click the Export/import - license transfericon at the top.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses -> Slave.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.



Exchanging license using the master

  1. Using the other computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses-> Master. Enter the computer name or IP address of the slave. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  5. Click Finish.


Returning the exchanged licenses before the time limit expires

  1. Using the slave, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Reverse license exchange -> Slave -> Reception.
  5. Using the master, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  6. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  7. Select Directly on the network.
  8. Select Reverse license exchange -> Master. Check whether the proposed computer name or IP address of the slave is correct.
  9. Click Reverse.



C. Exchanging licenses while offline


Creating computer ID files for the source and destination computers

First you need to create two computer-specific ID files: one for the source computer and one for the destination computer. These files are valid until you change the hardware of the corresponding computer. If the hardware changes (adding a hard disk or a DVD/CD drive, for example), you need to create a new computer ID file.

To create a computer-specific ID file:

  1. Start the Nemetschek License Manager by clicking Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top and select Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select Create computer ID file.
  4. Click Browse...and specify the path where you want to save the computer ID file.
  5. Click Finish.


Note:

The folder you select must exist. The computer-specific COMPUTERNAME.nslid file is created in this folder.
If the source computer and the destination computer are connected on the network, you can specify the source and destination paths over the network without having to use storage media or email attachments.

Exporting the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Export license option. The Import Computer IDdialog box is displayed.
  4. To export the license for a specific destination computer, do the following: Click Browse..., and select the computer ID file of the destination computer (name_of_destination_computer.nslid) and clickOpen. Click Next.
  5. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  6. Click Create License Transfer Fileand clickOKto confirm. A file (name_of_destination_computer_date_time.NslTransfer) is created for the destination computer.


As soon as you have exported the license, Allplan no longer starts on the source computer.

Importing the license file into the destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "License Transfer" dialog box is displayed.
  3. Select the (Re-)Import license option. Click Browse....and select the license file you want to import. Click Open.
  4. Click Import and clickOKto confirm.



Note:

Each license file can be imported just once. For this reason, the file name is preceded by the word "used_" after the import.

Returning the license file to the source computer before the time limit expires

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Return license option.
  4. Click Browse...and select the path where you want to save the license file returned. Then click OKto confirm.
  5. Click Return and clickOKto confirm.
  6. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  7. Select the "Nemetschek Softlock License Manager" tab. Click License transfer -> Offline license transfer. The "Offline License Transfer" dialog box is displayed.
  8. Select the (Re-)Import license option.
  9. Click Browse...and select the corresponding license file. Then click Open.
  10. Click Import and clickOKto confirm.
Download PDF  FAQ_EN_Transferring_NemSLock_licenses_temporarily_(i...
Version:  Allplan 2019  | Last modified: 04.03.2019
1 user(s) found this FAQ helpful

Question:


How can I activate my licenses for Allplan Online products and assign these licenses to other people?


Answer:



1. Components required

Internet connection and internet browser

2. Purchasing licenses

You can purchase Allplan Online products in two ways.

2.1 Allplan Shop (shop.allplan.com)

Allplan Options, Bimplus Options
a. Specify how many licenses you want to buy and add the Allplan Online product to the cart.
b. Follow the instructions displayed and buy the Allplan Online product.
After you have bought the Allplan Online product, the licenses will be assigned to your Bimplus team. You can manage these licenses using “My Account” - “Subscriptions and Users”.

2.2 Contact the Allplan sales partner in your area.

3. Assigning licenses

You can manage your licenses for the Allplan Online product in the Allplan Shop. Go to the “Subscriptions and User” area. As an alternative, you can also use the Bimplus portal. Here, go to the “Team members” area.

3.1 Sign in to the Allplan Shop or the Bimplus portal.

• Allplan Shop: Select “My Account” - “Subscriptions and Users”.
• Bimplus portal: Select “Team members”.

3.2 Select the Allplan Online product.

3.3 You can now assign one or more Allplan Online product licenses to team members. Select the user in the list and assign the license by selecting the check box. You can remove the license at any time by clearing the check box.
If the list does not include the user to whom you want to assign an Allplan Online product license, click “Invite new Bimplus team member”, enter the email address of the new team member and select a role.

Important: Do not assign the role of team administrator to a new team member unless this is absolutely necessary. A team administrator has more rights than a project administrator. You can define project administrators in the Bimplus project and user management.

You can find the new team member in the list as soon as this new team member has accepted the invitation.

4. Managing users and assigning users to the project

Allplan Online products are cloud-based solutions. Therefore, the Bimplus user management is used for project collaboration.
To define the project members, use the Bimplus project administration. You must invite new project members to the Bimplus project.
If these Bimplus project members also want to use Allplan Online products, you must assign an Allplan Online product license to each project member (see “Assigning licenses”).

Download PDF  FAQ_EN_Licensing_Allplan_Online_products.pdf
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011 / Allplan 2009  | Last modified: 11.07.2016
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

I have received a license for my dongle. How can I install this license?



Solution:

1. License on hard disk (or network drive)
Copy the license files to any folder, for example, C:\License, and select this folder when you install the license.

a. During setup
While installing Allplan, select the 'License file from any folder' option and choose the folder with the license files.

b. Installing a license later
To install the license, select
Services application -> Utilities -> License -> Install HARDLOCK License
A dialog box appears. Select the folder with the license files.

2. License by email
If you have received the license by email, save the attachment to any folder, for example, C:\License, and proceed as described in step 1.
If the licenses are compressed (*.zip), extract them first using an appropriate program, such as Winzip (www.winzip.de).

3. License on storage medium (CD or USB stick)
You can also copy the license files to a storage medium (USB stick, for example) or write them to a CD and then proceed as described in step 1b.



Notes:

  • If you have received a license for a license server, read the instructions in the documents for the license server. If any questions arise, contact technical support.
  • Keep the license in a safe place as you may need it for future installations or if there are problems.
  • Make sure you install the license that is appropriate to the dongle you use, as each license matches only a single dongle. time.
  • Setup needs to access the license file(s) during the entire installation process. It is therefore not possible to read the license file(s) from a CD and then remove this CD during installation. You are advised to copy the license file(s) to a folder on the hard disk.
Download PDF  FAQ_EN_Installing_license_for_dongle.pdf
Version:  Allplan 2017 / Allplan 2016 / Allplan 2015 / Allplan 2014 / Allplan 2013  | Last modified: 19.03.2018
1 user(s) found this FAQ helpful

Question:

What effects do Windows 8.1 updates have on Allplan versions?


Answer:

Allplan versions 2014-0-2 and later are running on Windows 8.1.
To make sure that Allplan runs smoothly after you have updated to Windows 8.1, you need to do the following:

1st step: backing up and restoring Allplan user settings

Prior to installing the Windows update, select
Services application -> Data Backup -> Create -> Entire folders -> Private settings -> Full
to back up your own Allplan user settings.

If you find out that some settings are missing after you have updated to Windows 8.1, you can select
Services application -> Data Backup -> Import -> Entire folders -> Private settings -> Full
to restore these settings.

In addition, you are strongly advised to back up and archive all the data before you update the operating system!



2nd step: restoring Allplan licensing

Depending on the licensing system you use, there are different issues to bear in mind.

NemSLock
After the Windows update you need to fix Nemetschek Softlock License Manager as described in the following document:
https://connect.allplan.com/de/faqid/20131024085525.html


Hardlock
Uninstall the hardlock driver (Sentinel runtime driver) during the update to Windows 8.1 as described below:
https://connect.allplan.com/de/faqid/20131028131634.html

Install the latest hardlock driver after the Windows update. You can find the driver and the instructions using the following link:
https://connect.allplan.com/de/faqid/20131028125253.html

Download PDF  FAQ_EN_Windows_81_update.pdf
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Last modified: 23.09.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:
I purchased a new license and received a Product Key for Allplan. However, I work with an earlier Allplan version. How can I install and license Allplan 2015 or an earlier version despite the new license?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use Softlock (NemSLock) or hardlocks with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

For licensing earlier versions, you require the Client ID and CD Key. You can find this information in the delivery note or invoice. Instead of a temporary license, use the appropriate trial license to install Allplan 2015 or an earlier version. Then generate a registration request to license and activate the modules you purchased.

Note:
If you use a license server for which you purchased an additional license, please read the separate document or contact support.de@allplan.com. We will show you how to add the new license to the license server.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Allplan Connect:
https://connect.allplan.com/de/support/downloads.html


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Request a license registered for your computer
The trial license is valid for 30 days. It is not personalized.
Consequently, you have to enter your personal data manually when generating the registration request.
You can find the required Client ID and CD Key in the delivery note or invoice.

To generate a registration request, do the following:

Open the License Manager (Service application -> Utilities- > License -> License Manager).
Select the license entry for your seat and click 'Request license'. Please follow the instructions displayed on screen.

Note: Editing customer details requires administrator privileges. The system will issue an appropriate message. Close NemSLock License Manager and start the Services application again. To do this, click the Services desktop icon with the right mouse button and select 'Run as administrator' on the shortcut menu.


Enter the necessary details:
The Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF).

For the Client ID, enter your customer number. You can find your customer number in the letteror delivery notethat came with Allplan.
For the CD Key, enter your CD Key, which you can also find in the letter or delivery note. Make sure you use small letters and capital letters accordingly.

Note:You can find the Client ID and CD Key at top left in the delivery note. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.


Fill out all the fields. Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.
Click Next >

For the seat, change the number 94 to the license you purchased, for example, 02, 03 or 04.
Specify how to send the registration file and click Next >.

Start email program ...
The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

Save the registration file ...
The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

In addition, you can see the data that were written to the registration file.

  1. Click Finish.
  2. Click Close to exit NemSLock License Manager.

You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read.


3. Installing the license file
Shortly after we received the registration request, we will send you the final license file to the email address you specified in the registration request.
Install this license file as follows:

  • Save the license file to any folder on the hard disk.
    If the license comes as a zip file, extract it.
  • Next, install the license by double-clicking the license file ("customer#_seat.nslock").
    Confirm the dialog box.
  • As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
    Click "Install - Install license" and then "Browse..." to select the license.
    Click "Finish" to complete the installation process.
  • Your registered license is displayed in the License Manager. Clear the check box for the trial license (for example, seat 94 or 98). Make sure your registered license is the only license that is selected.




Download PDF  FAQ_EN_Installing_an_earlier_version_with_NemSLock_i...
Version:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015  | Last modified: 16.10.2020
9 user(s) found this FAQ helpful

Information:

Quality reporter notified us of a crash. In analyzing the data, we found that you can improve the stability of your Allplan installation by installing the current graphics card driver.

You can find the current driver on the homepage of the graphics card manufacturer.
http://www.amd.com/de Support & Driver -> Download driver
http://www.nvidia.de Download driver

Use the driver on the homepage of the manufacturer. Do not use the driver provided by Windows Update.

Notes for notebook users:
It is essential that you install the graphics card drivers provided by the notebook manufacturer! You can find the current drivers on the homepage of the manufacturer.


Notes:

  • If the program still crashes after you have installed the latest graphics card driver, change the graphics mode from OpenGL to GDI+ in Allplan.

    Allplan 2012-1 and later:
    Start Allplan and select Tools -> Options.
    Select Desktop environment -> Display > Hardware acceleration - graphics area: switch off the "Use OpenGL for all viewports" option. Restart Allplan.

    From Allplan 2011-1 to Allplan 2012-0-2:
    Start the Services application.
    Service -> Hotline Tools -> draw -> OK
    On = OpenGL mode
    Off = GDI+ mode
  • You can find information on graphics cards at
    https://www.allplan.com/services/cad-software-support/grafikkarten.html
Download PDF  FAQ_EN_Quality_Reporter_-_graphics_card_driver_cause...
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Last modified: 23.09.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

I purchased a new license and received a Product Key for Allplan. However, I use earlier Allplan versions with NemSLock server in my office. How can I install Allplan 2015 or an earlier version despite the new license? How can I activate the license on NemSLock server?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use NemSLock server with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Downloading from Allplan Connect:
https://connect.allplan.com/de/support/downloads.html

FTP server:
Copy this link and paste it into the address bar of Windows Explorer. Then press ENTER.
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de
This opens the folder on our FTP server.

Go to /download/Allplan/2015/CD (choose the path in accordance with the version you need) and select the appropriate file. Then click Edit -> Copy (Ctrl+C).
Switch to a folder on your computer and select Edit -> Paste (Ctrl+V).
Extract the ZIP file. Right-click the EXE file and select "Run as administrator".
Deactivate the virus scanner during installation.


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Use NemSLock server to request a registered license for the new seat

If you have not used a license server until now, install the license server using the trial license for NemSLock Server.

Installing NemSLock Server

  • Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

  • The trial license is also on the FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/Allplan 2015 Nemslock Server Trial.nslsrv

  • Select the trial license file for NemSLock Server. This license is valid for 30 days, but it includes only seat. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below).
  • Select the full installation.
  • If the service does not start automatically after Setup, select Control Panel -> Administrative Tools -> Services and start the Nemslock Server 2006 service.



Registering licenses

  • Open NemSLock 2006 Server Consoleby clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
  • Switch to Moduleson the left.
  • Select one of your seats.
  • Click the Registration request (register.txt)button.
  • Click Edit.
  • Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OKto confirm.
  • Click Create registration request. Windows Explorer opens and shows the register.txt file.
    If you have closed Windows Explorer, you can find the file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is
    C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License.
  • Use an editor to open the new register.txt file.

You can find the entry for your seat in line @23@seat:. Change it and enter your new seat number instead. For example, if you purchased seat 08, change the entry to @23@seat: 08. Save the file.

  • You can now use all the options provided by Windows Explorer to copy the registration file to a computer with Internet connection. You can do this on the network or you can use a USB stick. You can then email the file to us.
  • Send the email with the registration request to register@nemetschek.de.
  • You will promptly receive your registered license for the new seat.



Installing licenses
Exit Allplan on all workstations.

  • Open NemSLock 2006 Server Console.
  • Click Stop serveron the left.
  • Switch to Moduleson the left.
  • Click Browse and select the registered license file.
  • Click Install license file.
  • After this, you can start the server again by clicking Start server.



Note:

If you purchased several new licenses, you have to generate and send a separate registration request for each seat. Just repeat the steps described above. You will then receive a registered license file for each seat. You must install each file.

Download PDF  FAQ_EN_Installing_an_earlier_version_with_NemSLock_s...
31 - 40 (45)
https://campus.allplan.com/ uses cookies  -  More information

Accept