Search Result

1 - 8 (8)
  • 1
Version:  Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 08.03.2019
4 user(s) found this FAQ helpful

Allplan from version 2011

Parts of Allplan 2011 have been reprogrammed and are completely new. Allplan uses a graphics library, which has been developed especially for CAD programs and visualization tasks. Depending on the data type and application, the display speed of Allplan is much higher than that of earlier versions, and refresh operations are considerably shorter. What's more, you can create hidden line images in real time.
This new technology is not a one-to-one implementation of the software-based solution in the previous version. Instead, a hardware-based approach is used. When it comes to data processing, the graphics card takes on much of the work. The different behavior of these two technologies that may occur in some parts is inherent. Therefore, the resulting display and refresh operations may differ slightly from what you are used to.



General graphics card requirements for Allplan

To fully exploit hardware acceleration capabilities, you require an Open GL 2.0 and DirectX10 (chip-based) compatible graphics card with 512 MB or more memory. Although Windows XP does not support DirectX10, Allplan only requires the chip-based support of the graphics card to manage the graphics library. OpenGL 2.0 is used in 2D and in visualization windows. These changes employ the latest technology in graphic display, so selecting a capable graphics card, and using the proper drivers is essential.

For more information on graphics card specifications, go to:

http://en.wikipedia.org/wiki/Comparison_of_AMD_graphics_processing_units
http://en.wikipedia.org/wiki/Comparison_of_NVIDIA_graphics_processing_units#Quadro)



Professional graphics cards versus Consumer-Level cards

Graphic card manufacturers typically have different product lines targeted for "gamers" and "professional users". While the hardware setup is very similar in case of both cards, there are key differences in their firmware and driver. "Consumer-Level cards" (such as Nvidia GeForce and AMD/ATI Radeon) are optimized for 3D games and technologically designed for DirectX10, as speed is more important than image quality.
Typically a 3D model in a game contains a low number of polygons with textures applied to them, while in CAD applications polygon count is high, and the image quality of wireframe models or shaded models is more important than navigation speed. Also, professional cards' memory usage is optimized for using multiple application windows, while in gaming this is not relevant.
Another key difference between the two product lines is the way they are delivered and supported. Professional cards (such as Nvidia Quadro and AMD/ATI FireGL/PRO) are built according to the video chip manufacturer's references, so you can always be sure that the driver delivered by the video chip manufacturer (such as Nvidia or AMD/ATI) fits your card.
The manufacturers of Consumer-Level cards (such as ASUS, Sapphire, Gigabyte, PNY and so on) may diverge from the chip manufacturer's references, so their drivers may not be compatible with the chip manufacturer's reference driver. Also, the product life cycle and driver release cycles are much shorter in case of gaming cards, usually 6 months up to 1 year at most and a 1-year warranty period maximum.

Example: comparison of graphics cards

Consumer-Level cards
Professional graphics cards / workstation
Products
Radeon
FireMV
FireGL/Pro
Mobility FireGL/Pro
Markets
  • Private customers: desktop systems and notebook systems
  • Corporate desktop systems
  • Corporate CAD and DCC desktop systems and notebook systems
Applications
  • Home/office publishing, productivity, multimedia, games, Internet
  • Finance, clearance, logistics, airport information displays
  • CAD/CAM/CAE, AEC, DCC, GIS, MI, visual simulation, scientific research/imaging
Certification
  • WHQL certification
  • Industrial applications
  • WHQL certification
  • Professional 3D applications
  • WHQL certification
Operating
systems
  • Windows 98SE / Me / XP
  • Windows Vista,
    Windows 7
  • Windows XP, XP64,Vista, Vista 64, Windows 7, Windows 7 64
  • Linux
Drivers
  • Optimized for DirectX
  • Basic Open GL
  • Optimized and designed for DirectX
  • Optimized and advanced Open GL
Life cycle
  • Available for 1 year on average
  • Available for 2-3 years on average
Support
  • Basic, private customers
  • Direct access to dedicated support by trained technicians
Warranty
  • 1 year
  • 3 years with replacementof components




Professional graphics cards versus Consumer-Level cards

Professional graphics cards differ considerably from "Consumer-Level cards" for private users with regard to specific market segments with special requirements:

  • Extensive application tests and certifications with CAD providers
  • Optimized and advanced support for API as well as further developments
  • Longer product life cycles and availability
  • Direct product support
  • Longer warranty period


Nemetschek Allplan GmbH cooperates with Nvidia und AMD to test graphics card drivers for the Nvidia FX Quadro/ Quadro and AMD/ATI FireGL/ Fire Pro series. These product lines are tested, certified and recommended for Allplan by Nemetschek Allplan Systems GmbH.

For more information on certified graphics cards, go to:

www.nemetschek.eu/info/grafikkarten
www.nemetschek.eu/info/graphiccards

There are four different categories and areas:

Graphics cardApplicationQuality testsStatus
Gaming graphics cards3D GamesTested / not testedNot recommended
    
Professional graphics cards3D basisCertified and recommendedEnd of life
    
Professional graphics cards3D performanceCertified and recommendedEnd of life
    
Professional graphics cards3D high performanceCertified and recommendedEnd of life




Recommended graphics cards for laptops (Windows)

For reasons detailed above, we cannot recommend any specific card and driver combination for laptops. However, there are professional graphics cards available for high-end laptops such as NVidia FX Quadro & Quadro NVidia "M" or AMD/ATI FireGL & FirePro "Mobility".
These graphics cards are just as good as their desktop counterparts.
Laptops with Consumer-Level cards have been tested only briefly and cannot be recommended. We have had bad experience with on-board Intel graphics cards.



Graphics cards drivers for Apple Macintosh

Since Macs come with a default graphics card (on-board or gaming), and the drivers are bundled with system updates, we cannot recommend a specific card.
Graphics cards for MacOsX 10.6 (Leopard) or later and Boot Camp support Open GL 2.0 and DirectX10. Currently, there is only one series that is equipped with a professional graphics card: Mac Pro with NVidia FX4800 for Mac.


Notes for Allplan and Macintosh:

  • There is no provision for a direct installation under Macintosh.
  • Access to Windows must be straight from the Boot Camp installation.
  • For performance reasons, Parallels Desktop cannot be used in conjunction with Nemetschek Allplan.


We kindly ask you to understand that Nemetschek Allplan cannot provide support for Boot Camp installations.



Installing graphics cards drivers (Windows)

Graphics cards only work properly if they have a hardware provider supplied driver (not system built-in driver) installed correctly. It may happen that remnants of a previous installation interfere with the current driver installation. If you experience display issues with the drivers listed below, please "clean-install" the driver again. "Clean-install" means removing all previous driver files before installing a new driver. Unfortunately, a simple uninstall may not efficiently remove all components of a driver. There are tools that can do it, like ATI's cat uninstaller or third-party tools like driver cleaner or driver cleaner pro 1.5.



Graphics card drivers for laptops (Windows)

In most cases, graphic card drivers for laptops are supplied by the laptop manufacturer, and graphic card provider supplied drivers will not install on laptops. This makes it practically impossible for us to test laptop graphics cards. If you are experiencing display issues with your laptop, and your supplier does not offer you a driver update, you might try - at your own risk - to tweak a desktop driver to work on your laptop. Note that this is obviously not encouraged by your laptop supplier.

Download PDF  FAQ_EN_Graphics_cards_for_Allplan.pdf
Version:  Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015 / Allplan 2014 / Allplan 2013  | Last modified: 21.09.2018
3 user(s) found this FAQ helpful

Question:

How can I restore a lost building structure or layout structure?



Answer:

To restore a lost or corrupt building structure or layout structure, you can do the following:

  • Close Allplan.
  • Open Windows Explorer, go to the central file storage folder of Allplan and open the "Prj"folder. Open the corresponding project folder and the "BIM" subfolder.

    Note:
    If the "Same folder name as project name" option is not selected for the project, a number is used for the folder name in the "Prj"folder. In this case, open the Services applicationand select the woprohotline tool (Services application -> Service -> Hotline Tools -> wopro). Select the corresponding project by double-clicking its name. An information dialog box shows the folder and file name of the project.
  • You can find an XML file for each structure in the BIM subfolder.


Building structure:
Allplan_BIM_BuildingStructure.xml

Objects derived from building structure:
Allplan_BIM_Views.xml

Plane model:
Allplan_BIM_LevMo_"name of model".xml

Layout structure:
Allplan_BIM_LayoutStructure.xml

  • To restore the building structure from a backup, rename the existing file "Allplan_BIM_BuildingStructure.xml" "Allplan_BIM_BuildingStructure.xml.old", for example.
  • Switch to the "Backup"folder, which you can also find in the"BIM"folder.
  • Select the most recent file that had been created beforethe building structure was deleted, for example, "Allplan_BIM_BuildingStructure.xml.27.5.2008--10-32-21.bak". The characters in bold indicate the date and time of the backup. Copy this file to the "BIM"folder.
  • Rename this file by deleting the characters after ".xml". Now the file name is "Allplan_BIM_BuildingStructure.xml".
  • Restart Allplan. The last version of the building structure is displayed in the "Open on a project-specific basis"dialog box again.




Note:

Using Allplan 2009-2 and later, you can restore the layout structure from a *.bak file straight from the "Open on a project-specific basis: layouts"dialog box.

  • Right-click the topmost structural level in the layout structure (project name) and select Load layout structure favoriteon the shortcut menu.
  • Open the last version of the Allplan_BIM_LayoutStructure.xml file in the backup folder mentioned above.


If the *.bak files are not displayed, please follow the steps described above.

Download PDF  FAQ_EN_Restoring_building_structure_layout_structure...
Version:  Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015  | Last modified: 22.02.2018
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I copy bar reinforcement including views and sections created with the tools in the "Associative Views" module if, for example, I want to use slab reinforcement for another floor?
I want to place the copied reinforcement and the views in new, separate drawing files and then adjust the reinforcement, keeping the layout of the copied sections. Only the changes in the copied reinforcement should automatically be added to the sections.


Answer:

First, open ProjectPilot (File -> ProjectPilot) and copy the drawing files with the reinforcement and the drawing file with the associative views and sections to new drawing files. ProjectPilot asks you whether you want to copy the linked drawing files as well. Click No.

If there are views or sections containing only data you do not want to move (for example, only model data), select Create -> Engineering Views, Details -> Associative Views -> Add to Viewand add the data you want to move (for example, reinforcement) to these views or sections. You can remove the data later.


The copied drawing files still reference the original drawing files. The next step is to delete those references.

To do this, open the drawing files you just copied. Select Change -> Engineering Views, Details -> Associative Views -> Manage Reference Drawing Filesand remove the references to the source drawing files.



When you have removed all links to drawing files you do not want to move, select the new drawing files with the views and the reinforcement.


Select all data by pressing <CTRL>+A and move the data as you need.
You can move the data in the X, Y and Z directions in plan or define any spatial displacement in isometric view.

You can then add the associated model data to the views and adjust the reinforcement.

Note:

Once deleted, you cannot restore any references to drawing files. Therefore, make sure you delete the right references. Allplan deletes empty views or sections automatically.

Download PDF  FAQ_EN_Copying_reinforcement_with_associative_views_...
Version:  Allplan 2018 / Allplan 2017  | Last modified: 01.11.2017
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I use data from the "Shell" module in Allplan 2017 and later?



Answer:


Data conversion in Allplan 2017

Allplan 2017automatically converts shell data from earlier versions the first time you open the project or *.ndw file in question.

Alllayouts you created ofgeneral arrangement drawings and reinforcement drawings stay as they are!
The 3D reinforcement modelstays as it is!
Theshell entitybecomes a 3D solid.
The views and sections(including reinforcement) become 2D elements and text.

Editing the data

As the old shell entitybecomes a 3D solid(construction lines) and the 3D reinforcement model stays as it is, you can create new associative views and sections from the model data.
Before you can do this, you need to assign "normal" format properties to the 3D solid created from the shell entity, as you cannot create associative views and sections from a solid in construction line format.

You canplace, modify and labelthe reinforcement without any restrictions. You can create schemas, legends andreportsas usual.




Download PDF  FAQ_EN_Shell_module_no_longer_available.pdf
Version:  Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015  | Last modified: 19.02.2018
2 user(s) found this FAQ helpful

Task:

You would like to export your Allplan 3D animation model and present it to somebody who does not work with Allplan.



Preparation:

Install a plug-in for Internet Explorer on the computer where you want to view the 3D data. Using this plug-in, you can open VRML files.

Plug-ins of this kind can be found on the Internet. Visit the website of Parallelgraphics, for example.
This plug-in is available for the following browsers:
Internet Explorer 6.0, Netscape Browser 8.0, Mozilla Firefox 1.5, Opera 8.5 or later versions.

http://www.cortona3d.com/Products/Cortona-3D-Viewer.aspx



Solution:

Open an animation window in Allplan.
Select File->Export ->Export to Cinema 4D/VRML/3DS/U3Dand save the data under any name in Windows Explorer.
It is advisable to save the file in an empty folder as the textures used in Allplan are copied together with the VRM fileto this folder.
You can then view the VRML file in Internet Explorer. All you need to do is double-click it. The functions provided for navigating and zooming are similar to those you can use in Allplan&apos;s animation window.



Note:

The Export 3D PDFtool is provided on the animation window&apos;s shortcut menu in Allplan 2008 and later versions. You can use Adobe Reader Version 2008 and later to view PDF files created in this manner.

Download PDF  FAQ_EN_Presenting_3D_animation_model_without_Allplan...
Version:  Allplan 2019  | Last modified: 10.12.2018
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

What are the benefits of the new views and sections?



Answer:

In Allplan 2019, you can use the new views and sections for reinforcement for the first time. This results in various benefits: You no longer need write access to the building model while placing reinforcement. Different access rights make it easier for architects and engineers to collaborate on the same project.

For example, architects may have write access to all building components, whereas engineers can be given write access for the placement of reinforcement only, with read-only access to the building components. This prevents unintentional modifications whilst working on shared models enhances collaboration across disciplines. In addition, this enhances system performance especially with large and detailed models.

Frequently, similar reinforcement placements are required across a building. With the new views and sections, you can copy reinforcement including sections and labels from one location to others. This approach significantly reduces the time and effort spent on reinforcement.





Note:

You cannot create reinforcement views and the new views and sections in the same drawing file.
We recommend using reinforcement views to finish projects with reinforcement from earlier versions.
Using the new views and sections, you can place sections and reinforcement in the same drawing file.

Download PDF  FAQ_EN_Views_and_sections.pdf
Version:  Allplan 2013 / Allplan 2012 / Allplan 2011 / Allplan 2009  | Last modified: 18.01.2013
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I plan an excavation pit of approximately the same cut and fill in sloping terrain?



Answer:

The DTM is reduced to the area of the planned building. When you compute the cut and fill and set the data type to 22.014 and the horizon to yes, the horizon represents the base of the pit. You can perform consecutive calculations using different height settings for the horizon. This way, you can quickly produce an approximation of the correct height of the base.

The individual steps:

1. Use lines to draw the outline of the building in the original DTM. The next step is to mesh these lines with the DTM (Modify -> Terrain -> Digital Terrain Model -> Mesh Element with DTM). This adds new points to the DTM. These points are on the end points of the lines and the height is interpolated based on the DTM.

2. Enter an exterior boundary that serves as the outline of the building (Modify -> Terrain -> Digital Terrain Model -> Exterior Boundary). The points required for entering the exterior boundary were created when you meshed the lines with the DTM.

3. Finally, compute the cut and fill using the 22.014 data type (Create -> Terrain -> Digital Terrain Model -> Compute Cut and Fill). In particular, use the following settings: DataTp: 22.014; Horiz: Yes; Analyze: Cut and Fill. Enter the mean height of the DTM as the initial value for the horizon in the Heightbox. Perform some calculations to determine the correct height of the horizon.

Download PDF  FAQ_EN_Calculations_using_the_same_cut_and_fill.pdf...
Version:  Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 11.12.2015
2 user(s) found this FAQ helpful

Question:

How can I use Allplan to create PDF documents (Portable Document Format) that can be opened and viewed using PDF viewers such as the free Acrobat Reader?



Answer:

You can export PDF files directly from Allplan.
In addition to the design, bitmap areas and text, the direct export tool transfers layers, OLE objects, transparency and gradients.
Of course, you can also use external programs such as Adobe PDF and FreePDF to create PDF files. However, these programs do not provide all the options mentioned above. For example, transparency is not transferred.

Allplan provides the following options for exporting PDF data:

1. using the layout editor:
Create -> Plot Layout -> Export PDF Data

2. using the print preview:
Click the Export PDF Data icon in the toolbar at the top

3. exporting 3D PDF files from the animation window:
You can create a PDF file from the animation window. This file contains the 3D model displayed in the animation window.
This option is not described any further in this FAQ.


General settings:

When exporting PDF data, you specify the file name in a dialog box, where you can also make basic settings for the PDF file:

  • Resolution (in dpi)
  • Document size (paper size (with margin) or printable area (without margin))
  • Entire layout content
  • Archiving format PDF/A 1a
  • Export layers
  • Embed TrueType fonts
  • ...
  • Add to file (first select an existing PDF file in this dialog box and then select this option -> the PDF file is attached as a new page to the existing file)
  • Grayscale (version 2011 and later)
  • Open file with associated application (should be selected. After you have created it, the PDF file automatically opens in this application so that you can check it.)



Note on the page format (new in Allplan 2011):

In Allplan 2011 and later versions, you set up a page in Allplan. The page size should be used as the size for the PDF file.
You need to exactly define the size you require for the page.

To use the page size for exporting the PDF file, select the following options:

  • Select &apos;Paper size (with margin)&apos;.
  • Clear the &apos;Entire layout content&apos; check box, if necessary.



Notes on 1. settings in the Plot Layout module:

You can make advanced settings in the "Plot Layouts" dialog box.
The following settings are used for exporting PDF data:

  • Plot elements / options (Selection tab)
  • Paper format and orientation (Output tab); see the above notes on the page format.
  • Resizing: Resizing factor, resize pen thickness and rotation by 90° (Settings tab)
  • Pen and color assignments... (Settings tab)
    -> Line thickness for monochrome output and line colors for color output
    -> Line display in color, black or using shades of gray (can only be changed when you select a color printer beforehand)
    -> Gamma correction
  • No pen optimization/ Use one pen only (number:)
  • Plot profile (Settings tab)




Notes on 2. settings in the print preview:

The PDF file is exported as it is currently displayed on screen.
You can make the settings that are used for the "Print" tool directly in the print preview (Display tab in the Print Preview Options).



Notes:

To export PDF data in color, you need to install a printer driver that supports color and select this driver in the layout before you start exporting the PDF data.
It is advisable to install a printer driver for a large-format color plotter such as an HP DesignJet even if your office is not equipped with a large-format printer/plotter.
[Install as a local printer/ without plug & play, port: FILE, do not share the printer, do not print a test page.]

Download PDF  FAQ_EN_Creating_PDF_files.pdf
1 - 8 (8)
  • 1
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
https://campus.allplan.com/ uses cookies  -  More information

Accept