13.09.2018 - 12:16
I WOULD LIKE TO KNOW IF IT'S SOMEHOW POSSIBLE TO EXPORT FROM ALLPLAN- 2D GRID SYSTEM TO IFC.
Das Wissen aller Anwender nutzen
Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.
Es erwarten Sie:
- Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
- Tipps von User für User
- international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch
Melden Sie sich jetzt an und diskutieren Sie mit!
- Forum
- CAD general
- Allplan Exchange
EXPORT GRID IN IFC
Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen
04.12.2018 - 09:26
*
Hi!
In Solibri the axis are not visible by default.
You have to activate them by clicking on "Show Footprint Controls" in the main menu and then "show/Hide Grids" in the footprint menu at the right.
Solibri shows one copy of axis in each floor which you can control by the sliders below the footprint tools until you see only one floor.
regards,
Stefan
GEA Arquitectos S.L.P.
Calle Gerardo Diego 6A | 41013 Sevilla | Spain
20.09.2018 - 11:04
Hello.
If you draw the grid with the "Axis Grid" tool in the Advanced Draft module you can export it to IFC using the "Export IFC 2x3 Data..." option. It doesn't seem to work with "Export IFC Data..." though.
Regards,
Stefan
GEA Arquitectos S.L.P.
Calle Gerardo Diego 6A | 41013 Sevilla | Spain
21.09.2018 - 09:54
Hi,
with Version 2019 it is also available in the new Interfaces with "Export IFC Data …"
Bye
Thomas
Product Manager Allplan Cloud & Bimplus, Allplan GmbH
03.12.2018 - 11:59
Hey,
it does not really work - Even in V2019.
I checked the export with all possible line types and also with the axis grid module. I also tried it with IFC2x3 and IFC4.
After that I opened the IFC files with Solibri Model Checker and nothing was displayed.
Then I opened the files with BIMplus and the automatically generated axis grid appeared.
But that does not help anyone if it only works in BIMplus ...
04.12.2018 - 09:26
*
[Hilfreichste Antwort]
Hi!
In Solibri the axis are not visible by default.
You have to activate them by clicking on "Show Footprint Controls" in the main menu and then "show/Hide Grids" in the footprint menu at the right.
Solibri shows one copy of axis in each floor which you can control by the sliders below the footprint tools until you see only one floor.
regards,
Stefan
GEA Arquitectos S.L.P.
Calle Gerardo Diego 6A | 41013 Sevilla | Spain