Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.
Melden Sie sich jetzt an und diskutieren Sie mit!
Is it possible to get the symbolname/sectionname for the column if you chose for example a IPE profile? I want to place the name of the section in the detail, and not with a general text fonction.
If you don't know, I created a SmartPart for steel sections. There are 2891 sections in one SmartPart and you can also define your own one based on usual shapes.
So, you are able to display 2D and/or 3D labels. You can also use a Allplan label connected to an attribute. The quantity can be listed in standard reports (e.g. Allplan BCM report). You get the length, the weight and the number of each section in your drawing.
There is a presentation video here.
Feel free to contact me if needed.
That's unfortunately not possible. This topic was discussed in the german forum years ago.
VG
Marcus
If you don't know, I created a SmartPart for steel sections. There are 2891 sections in one SmartPart and you can also define your own one based on usual shapes.
So, you are able to display 2D and/or 3D labels. You can also use a Allplan label connected to an attribute. The quantity can be listed in standard reports (e.g. Allplan BCM report). You get the length, the weight and the number of each section in your drawing.
There is a presentation video here.
Feel free to contact me if needed.
