Das Wissen aller Anwender nutzen

Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.

Es erwarten Sie:

  • Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
  • Tipps von User für User
  • international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch

Melden Sie sich jetzt an und diskutieren Sie mit!

Zur Registrierung

Automatic numerator


Hi everyone.
Is Allplan going to create a formula that would automatically give the number of the changed position?

Example. I have some poles on the building and I want to name them.
The 25x25 pole would have the number S1, while each next number would be assigned depending on the dimensions, i.e. the 25x30 pole would have the number S2 etc.

Are there any conditional formulas that can be created in Allplan?

Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen

Hi, I am an Allplan user from Vietnam.
In that case you can use the function of Export and Import the attribute integrated with other format (.xlsx for example).
You can modify parameters you want quickly in Excel file. Then you can import again into Allplan to update the attribute.
You can take a look in the picture below.

Anhänge (1)

Typ: image/png
103-mal heruntergeladen
Größe: 14,53 KiB

Tak

does not have this facility. Only from attributes can you enter a variable text

Hi, I am an Allplan user from Vietnam.
In that case you can use the function of Export and Import the attribute integrated with other format (.xlsx for example).
You can modify parameters you want quickly in Excel file. Then you can import again into Allplan to update the attribute.
You can take a look in the picture below.

Anhänge (1)

Typ: image/png
103-mal heruntergeladen
Größe: 14,53 KiB

Zitiert von: Thai_Duong
Hi, I am an Allplan user from Vietnam.

In that case you can use the function of Export and Import the attribute integrated with other format (.xlsx for example).
You can modify parameters you want quickly in Excel file. Then you can import again into Allplan to update the attribute.

You can take a look in the picture below.

Hi,Thank you very much. I can do automatic naming with this method.

I have a question. Can we set a sequence? Do we have to go sequentially at the beginning of the drawing?

Anhänge (1)

Typ: image/png
96-mal heruntergeladen
Größe: 39,25 KiB

https://campus.allplan.com/ verwendet Cookies  -  Mehr Informationen

Akzeptieren