Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.
Melden Sie sich jetzt an und diskutieren Sie mit!
Hi, I am trying to find a way to use German standard. For example now I see a choice of steel grades A-I, A-II, A-III and so on, but I need B500..Is there a way to modify this, or have I made something wrong in the installation?
Thanks in advance!
Dear Philipova,
First of all, you should use the correct "Standard" or "Norm" in the option of engineering module.
At the moment, you are in "DIN EN", which is the Euronorm with German appendix.
You can set it to:
BS EN
BS 8666
And maybe some other.
Than you have the possibility to use the steel grade to B500B.
But take care because you catalog of bars and mesh is maybe in german.
So you must also load the englisg catalog for reinforcement.
To do that, you must create a project with the reinforcement setting define in "Projet" (if not you will change all project).
Than click to Tools / Default and open the cross section catalog.
In this windows, you can load any catalog from other country by clicking in "read" and search the correct data. All country reinforcement are saved in the folder "C:\Program Files\Nemetschek\Allplan2019\New\Ing" and choose the file "aengqusr.txt".
Bye & Good Use!
Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support
Allplan France & Allplan Software Engineering
Depuis 2006
Dear Philipova,
First of all, you should use the correct "Standard" or "Norm" in the option of engineering module.
At the moment, you are in "DIN EN", which is the Euronorm with German appendix.
You can set it to:
BS EN
BS 8666
And maybe some other.
Than you have the possibility to use the steel grade to B500B.
But take care because you catalog of bars and mesh is maybe in german.
So you must also load the englisg catalog for reinforcement.
To do that, you must create a project with the reinforcement setting define in "Projet" (if not you will change all project).
Than click to Tools / Default and open the cross section catalog.
In this windows, you can load any catalog from other country by clicking in "read" and search the correct data. All country reinforcement are saved in the folder "C:\Program Files\Nemetschek\Allplan2019\New\Ing" and choose the file "aengqusr.txt".
Bye & Good Use!
Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support
Allplan France & Allplan Software Engineering
Depuis 2006
