Das Wissen aller Anwender nutzen

Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.

Es erwarten Sie:

  • Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
  • Tipps von User für User
  • international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch

Melden Sie sich jetzt an und diskutieren Sie mit!

Zur Registrierung

[Frage] Widht of meshes [Gelöst]

Schlagworte:

1. Allplan offers a maximum widht of meshe of 2.2 m. Can a meshe of 2.3 m be entered?

Thanks in advance

Anhänge (1)

Typ: image/png
22-mal heruntergeladen
Größe: 181,64 KiB

Lösung anzeigen Lösung verbergen


Faris,

Go to Tools, Defaults.... (Alati, Definicije....) and choose Cross-section catalogs (Katalozi presjeca).
Check / Edit catalogs for meshes, you probably have 6 x 2,2m meshes.
.....

EC2, xoxoxo
Check this out: https://www.pittini.it/wp-content/uploads/Catalogo-Reti-Standard-Gruppo-Pittini.pdf

Hi Faris,

You can define custom mesh type and size in Cross-section catalogs. If your local mesh manufacturer can deliver 2,3m wide mesh, than create a custom cross-section catalog that corresponds to mesh sizes in your country.

See Online Help for more: https://help.allplan.com/Allplan/2019-0/1033/Allplan/index.htm#7253.htm

Take the Mesh Q-524-A then you get it

Gruß Jürgen
Allplan V10 bis V2024

Zitiert von: Allplan_er
Take the Mesh Q-524-A then you get it

I haven't Q-524-A

Anhänge (2)

Typ: image/png
5-mal heruntergeladen
Größe: 11,88 KiB
Typ: image/png
1-mal heruntergeladen
Größe: 11,96 KiB

witch version you have? 2018? German?
the meshes are in the Europe EC2- catalog....

Gruß Jürgen
Allplan V10 bis V2024


Faris,

Go to Tools, Defaults.... (Alati, Definicije....) and choose Cross-section catalogs (Katalozi presjeca).
Check / Edit catalogs for meshes, you probably have 6 x 2,2m meshes.
.....

EC2, xoxoxo
Check this out: https://www.pittini.it/wp-content/uploads/Catalogo-Reti-Standard-Gruppo-Pittini.pdf

Zitiert von: JohanC

Faris,
Go to Tools, Defaults.... (Alati, Definicije....) and choose Cross-section catalogs (Katalozi presjeca).
Check / Edit catalogs for meshes, you probably have 6 x 2,2m meshes.
.....
EC2, xoxoxo
Check this out: https://www.pittini.it/wp-content/uploads/Catalogo-Reti-Standard-Gruppo-Pittini.pdf

THANKS JOHAN!!!

https://campus.allplan.com/ verwendet Cookies  -  Mehr Informationen

Akzeptieren