Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.
Melden Sie sich jetzt an und diskutieren Sie mit!
Hello,
to create a plan i have to use the function "Page/Plotter Setup in the menue "Tools". Then i can select the attributes. But when it comes to the Layout Border I can only choose A2 as size (A1 and A0 are also needed). What can I doing wrong or is there something else I have to do?
best regards and thanks for helping
Lara
Hello Lara,
the size you can select from depend on your printer driver you've chosen before. If you're using a printer that can handle A4 at most for instancw (maybe it's not built for larger paper sizes) but you need larger formats then you need to select another printer/plotter that supports larger paper sizes.
If you haven't installed such a printer/plotter on your computer yet, I recommend doing so. This is also useful, even if the printer/plotter is not connected to the computer because that way you can use all the paper sizes or specific settings supported by this printer/plotter.
I usually recommend installing a printer driver offered directly by the printer's manufacturer on their homepages. If you have a plotter from HP for instance you should get the specific driver from the homepages of HP.
greetings
Undine
Dear Undine
thanks for answer. It was a great help.
best regards
Lara
Great, thanks!
Undine
