Das Wissen aller Anwender nutzen

Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.

Es erwarten Sie:

  • Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
  • Tipps von User für User
  • international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch

Melden Sie sich jetzt an und diskutieren Sie mit!

Zur Registrierung

[Frage] Pen Thickness (Weight)

Schlagworte:
  • Allplan
  • Pen
  • Thickness
  • (weight)
  • Assciated
  • With
  • Layer

Dear All user / Allplan Support Team,

Can we assign Pen weight (thickness) less than 0.13 mm? I wish to assign less than 0.05 mm and slowly / gradually increase.

Or Can we used user pen weight(thickness)? If yes, please share work flow.

Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen

Hi Atul,

As far as I know you can assign up to max. 8 pen thicknesses in Allplan by default to use. This can be defined in the Default options which are to access under the tab Tools --> Defaults --> Pen Thickness + Format QuickSelect. After this you get a menu where you can define the desired pen thicknesses under number 1-8, see attachment. This will change/effect everything in your project which uses these thicknesses like all of your layers which are defined to use a pen thickness number 1-8.

If you want to define always different pen thicknesses and you do not want to change these default pen thicknesses you can make a pattern, also under Tools, which is just a regular filled square and assign this to a line. In the properties of the line you then can afterwards define the desired thickness, also different thickness at the start and end of the line.

Hope this helps you a bit further in this.

Kind regards,

Nick

Anhänge (1)

Typ: image/png
71-mal heruntergeladen
Größe: 34,31 KiB

Hi Atul,

As far as I know you can assign up to max. 8 pen thicknesses in Allplan by default to use. This can be defined in the Default options which are to access under the tab Tools --> Defaults --> Pen Thickness + Format QuickSelect. After this you get a menu where you can define the desired pen thicknesses under number 1-8, see attachment. This will change/effect everything in your project which uses these thicknesses like all of your layers which are defined to use a pen thickness number 1-8.

If you want to define always different pen thicknesses and you do not want to change these default pen thicknesses you can make a pattern, also under Tools, which is just a regular filled square and assign this to a line. In the properties of the line you then can afterwards define the desired thickness, also different thickness at the start and end of the line.

Hope this helps you a bit further in this.

Kind regards,

Nick

Anhänge (1)

Typ: image/png
71-mal heruntergeladen
Größe: 34,31 KiB

Hi Nick,

Thanks for answer and guidance.

Yes, it solves my problem.

with regards

Atul Thakor