Das Wissen aller Anwender nutzen

Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.

Es erwarten Sie:

  • Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
  • Tipps von User für User
  • international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch

Melden Sie sich jetzt an und diskutieren Sie mit!

Zur Registrierung

Reinforcement Legend

Schlagworte:
  • Allplan 2022-1-0
HaTeM
HaTeM
06.12.2022 - 11:55

Hi everyone,
Is there a way in Allplan where I can see all rebar diameters (like 8/10/12/14/) in the drawing? I am trying to make a legend, I need a method like this (like 8/10/12/14/). I would be very happy if someone who knows can help.

Hatem OZDEMIR
Architect | Allplan Trainer | BIM Manager
Website: http://www.bimakademi.com
e-mail: hatemozdemir[at]gmail.com
Ankara / Turkiye
LinkedIn-Profil
YouTube

JohanC
JohanC
07.12.2022 - 06:38

Hi Hatem,

I don't (fully) understand what you want but maybe this is it:

If you use Filter by Reinforcing Bar Element and then select Diameter, only diameters available in opened editable drawing files will show on the list.

HaTeM
HaTeM
07.12.2022 - 07:58

Hi Johan,

Thank you for the answer. I am trying to do something like in the picture (Snap1.jpg)

Hatem OZDEMIR
Architect | Allplan Trainer | BIM Manager
Website: http://www.bimakademi.com
e-mail: hatemozdemir[at]gmail.com
Ankara / Turkiye
LinkedIn-Profil
YouTube

Anhänge (1)

img
Snap1.jpg
Typ: image/jpeg
125-mal heruntergeladen
Größe: 148,69 KiB
JohanC
JohanC
07.12.2022 - 08:49

Got it!

If you use analyze formula TOTAL(COLUMN#) or attribute entry Diameter, you will have a list in vertical fashion
But you want it in horizontal one, divided by /

HaTeM
HaTeM
07.12.2022 - 09:05

I get such a result when I use the MT_Raum() (Room1/Room2/Room3) formula in architecture. Do you know of such a formula for reinforcement?

Hatem OZDEMIR
Architect | Allplan Trainer | BIM Manager
Website: http://www.bimakademi.com
e-mail: hatemozdemir[at]gmail.com
Ankara / Turkiye
LinkedIn-Profil
YouTube

JohanC
JohanC
07.12.2022 - 10:26

I don't recall MT_Rundstahl / MT_Matten formulas.

HaTeM
HaTeM
07.12.2022 - 12:13

unfortunately both are not working

Hatem OZDEMIR
Architect | Allplan Trainer | BIM Manager
Website: http://www.bimakademi.com
e-mail: hatemozdemir[at]gmail.com
Ankara / Turkiye
LinkedIn-Profil
YouTube

Judy_AllplanFR
Judy_Allpl…
08.12.2022 - 08:50

Dear Hatem,

The bars are not linked to any object that you can "label". If it was, it would be possible to label the parent element and ask for the child, than you could see all diameter for the child.

There is a difference between a labeling and a legend.

If you use a legend, the search find all value as one row per value. So you can create a Bar schedule with only the diameter and see all diameter as a "row".

If you have a multi-layer wall with 4 layer, you can label the "entire wall" and display the thickness of each leaf as one attribut by asking the child(thickness), so you will see maybe thick: 2/20/10/2.

Maybe it help you.

Bye & Good Use!

Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support

Allplan France & Allplan Software Engineering

Depuis 2006

HaTeM
HaTeM
08.12.2022 - 09:32

Thank you for your answer Judy. I tried many things, but it doesn't give the result I want. Is there a way to see the reinforcements in the drawing as an array? I can do it in reports but not in legend

Hatem OZDEMIR
Architect | Allplan Trainer | BIM Manager
Website: http://www.bimakademi.com
e-mail: hatemozdemir[at]gmail.com
Ankara / Turkiye
LinkedIn-Profil
YouTube