Das Wissen aller Anwender nutzen

Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.

Es erwarten Sie:

  • Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
  • Tipps von User für User
  • international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch

Melden Sie sich jetzt an und diskutieren Sie mit!

Zur Registrierung

[Frage] Adjusting hook length

Schlagworte:
  • Allplan
  • PythonParts
  • Reinforcement
  • Hook_length
ukorkunc
ukorkunc
03.07.2024 - 05:54

How can I set the hook length using "create_longitudinal_shape_with_user_hooks"? I could not find it.

Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen

bmarciniec
bmarciniec
03.07.2024 - 06:55 *

Hi,

you can set the length by providing the start_hook and end_hook arguments with values higher than 0:

  • When the values are higher than 0, they are understood as the desired length of the hook
  • When the values are equal to 0, the hook length is calculated based on the current reinforcement standard
  • When the values are equal to -1, no hook is created

Here's an example of a definition of a longitudinal rebar 6m long, with 15 cm hooks:

create_longitudinal_shape_with_user_hooks(
    length = 6000,
    model_angles = RotationAngles(0,0,0),
    shape_props = shape_props,
    concrete_cover_props = ConcreteCoverProperties.all(30),
    start_hook = 150.0,
    end_hook = 150.0,
) -> BendingShape

If you find a feature badly documented in 2024 Version, give it a try and have a look on 2025 version - many of the functions (but not all yet) are documented better there. This is the case with this function.

Also please give us feedback on good/bad documented functions/classes/feature by clicking the thumbs up/down at the bottom of the page. We can focus on things that matters.

Best,
Bart

bmarciniec
bmarciniec
03.07.2024 - 06:55 * [Hilfreichste Antwort]

Hi,

you can set the length by providing the start_hook and end_hook arguments with values higher than 0:

  • When the values are higher than 0, they are understood as the desired length of the hook
  • When the values are equal to 0, the hook length is calculated based on the current reinforcement standard
  • When the values are equal to -1, no hook is created

Here's an example of a definition of a longitudinal rebar 6m long, with 15 cm hooks:

create_longitudinal_shape_with_user_hooks(
    length = 6000,
    model_angles = RotationAngles(0,0,0),
    shape_props = shape_props,
    concrete_cover_props = ConcreteCoverProperties.all(30),
    start_hook = 150.0,
    end_hook = 150.0,
) -> BendingShape

If you find a feature badly documented in 2024 Version, give it a try and have a look on 2025 version - many of the functions (but not all yet) are documented better there. This is the case with this function.

Also please give us feedback on good/bad documented functions/classes/feature by clicking the thumbs up/down at the bottom of the page. We can focus on things that matters.

Best,
Bart