Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.
Melden Sie sich jetzt an und diskutieren Sie mit!
I want to make a rebar with a free shape in Python.
To be precise, I want to implement Convert, Match Elements among Allplan functions.
Is there a way to freely draw a Polyline and turn it into a Bar Shape?
Hello,
you can use the API class BendingShape:
def __init__(self, shapePol: Polyline3D, bendingRoller: VecDoubleList, diameter: float, steelGrade: int, concreteGrade: int,
bendingShapeType: BendingShapeType) -> None:
"""
Constructor
Parameter: shapePol Shape polyline
bendingRoller Bending roller
diameter Diameter
steelGrade Steel grade
concreteGrade Concrete grade (index of the global list starting from 0, -1 = use global value from the Allplan settings)
bendingShapeType Bending shape type
"""Best regards
Horst
Hello,
you can use the API class BendingShape:
def __init__(self, shapePol: Polyline3D, bendingRoller: VecDoubleList, diameter: float, steelGrade: int, concreteGrade: int,
bendingShapeType: BendingShapeType) -> None:
"""
Constructor
Parameter: shapePol Shape polyline
bendingRoller Bending roller
diameter Diameter
steelGrade Steel grade
concreteGrade Concrete grade (index of the global list starting from 0, -1 = use global value from the Allplan settings)
bendingShapeType Bending shape type
"""Best regards
Horst
def __init__(self, shapePol: Polyline3D, bendingRoller: VecDoubleList, diameter: float, steelGrade: int, concreteGrade: int, bendingShapeType: BendingShapeType) -> None: """ Constructor Parameter: shapePol Shape polyline bendingRoller Bending roller diameter Diameter steelGrade Steel grade concreteGrade Concrete grade (index of the global list starting from 0, -1 = use global value from the Allplan settings) bendingShapeType Bending shape type """Best regards
Horst
Thank you for answering my question.
I have more questions.
1. ShapePol: Polyline3D is only available for Class Polyline3D?
2. If Class Polyline 3D() is possible, should I change the 3D Arc to Polyline 3D and enter it?
Hello,
Allplan can't create a bar from a Arc3D. You need to convert the Arc3D to a Polyline3D, for this you can use the Polygonize function.
Best regards
Horst