Das Wissen aller Anwender nutzen

Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.

Es erwarten Sie:

  • Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
  • Tipps von User für User
  • international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch

Melden Sie sich jetzt an und diskutieren Sie mit!

Zur Registrierung

[Frage] Modifying multiple PythonParts in one step

Schlagworte:
  • PythonParts
Szabolcs_Polyak
Szabolcs_P…
04.01.2022 - 19:21

Is there any way in Allplan to modify multiple selected PythonParts all at once?
If there is, please tell me how!

Example: I have a lot (100+ pcs) of 'T' roof beams in an industrial hall, where you have to change the the cross-section (to comply with the molds of the chosen manufacturer). All elements are created from the same pythonpart, but already have a unique (manually) assigned ID, which should stay the same.

The easy(?) way is to change one, delete the others, then copy the modified one, but then you have to assign the unique ID's again manually, which results to be more time-consuming.

Second way would be to change one element, save it as a favorite, then load it one by one to each beam to be modified? This is clearly not an acceptable solution if you have to do it with 100+ beam elements.

So I want to change multiple parametric PYTHONPART elements simultaneously with one command, in the easiest way possible.

Marcus
Marcus
11.01.2022 - 13:50

Since Allplan 2022 PythonParts can be modified similar to SmartParts.
Modify one and Allplan will ask to modify all exactly equal PythonParts.

VG
Marcus