[Otázka] Wall coloring [Vyřešeno]


Hi all,

How to make the marked wall surface (green area) different color in the allplan program?
I just want to change the color, I don't change the wall.

thanks,
György Bruckner

Přílohy (1)

img
pic.png
Type: image/png
Staženo 16
Size: 627,81 KiB

Show solution Hide solution

Hello,
You have several possibilities.
1- You make three walls for bottom, top with white color and the middle one with another color. But it is not easy to modify them...
2- You add another wall-layer where you need the special color, with a thickness less than 1 mm with specific parameters for bottom and top.
3- You add just a 3D surface (or a very thin 3D volume) with another color about 0.5 mm before the real wall.
...
It depends of what you need to get...


1 - 4 (4)
  • 1

Hello,
You have several possibilities.
1- You make three walls for bottom, top with white color and the middle one with another color. But it is not easy to modify them...
2- You add another wall-layer where you need the special color, with a thickness less than 1 mm with specific parameters for bottom and top.
3- You add just a 3D surface (or a very thin 3D volume) with another color about 0.5 mm before the real wall.
...
It depends of what you need to get...


Hallo Bertrand_C,

Thanks your answer. it was a good idea, thanks.

You're welcome!


1 - 4 (4)
  • 1

https://campus.allplan.com/ používá cookies  -  Více informací

Souhlasím