Hi Hatem,

I don't (fully) understand what you want but maybe this is it:

If you use Filter by Reinforcing Bar Element and then select Diameter, only diameters available in opened editable drawing files will show on the list.

Got it!

If you use analyze formula TOTAL(COLUMN#) or attribute entry Diameter, you will have a list in vertical fashion
But you want it in horizontal one, divided by /

I don't recall MT_Rundstahl / MT_Matten formulas.

Dear Hatem,

The bars are not linked to any object that you can "label". If it was, it would be possible to label the parent element and ask for the child, than you could see all diameter for the child.

There is a difference between a labeling and a legend.

If you use a legend, the search find all value as one row per value. So you can create a Bar schedule with only the diameter and see all diameter as a "row".

If you have a multi-layer wall with 4 layer, you can label the "entire wall" and display the thickness of each leaf as one attribut by asking the child(thickness), so you will see maybe thick: 2/20/10/2.

Maybe it help you.

Bye & Good Use!