Allplan Forum: Incorrect bar shape in section (Reinforcement views)

Das Wissen aller Anwender nutzen

Im Allplan Connect Forum tauschen sich Anwender aus, geben wertvolle Tipps oder beraten sich bei ganz konkreten Aufgabenstellungen − auch international.
Und damit wirklich keine Frage unbeantwortet bleibt, unterstützen die Mitarbeiter des Technischen Supports ebenfalls aktiv das Forum.

Es erwarten Sie:

Foren-Vielfalt aus CAD Architektur, CAD Ingenieurbau uvm.
Tipps von User für User
international: Deutsch, Englisch, Italienisch, Französisch und Tschechisch

Melden Sie sich jetzt an und diskutieren Sie mit!

Zur Registrierung

Forum
CAD Engineering
CAD Engineering

[Frage] Incorrect bar shape in section (Reinforcement views)

Schlagworte:

bianchinia…

27.10.2023 - 13:25

Hello everyone,

The attached image shows a detail of the reinforcement of a precast concrete beam.
Unfortunately the inclined bar is not properly represented in the section. The section was created with the "Reinforcement views" function.
As you can see the inclined bar is out of the beam in the section.

Is there any solution to represent the bar properly?

Thank you in advance!

Anhänge (1)

Typ: image/png

72-mal heruntergeladen

Größe: 22,04 KiB

Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen

Judy_Allpl…

11.01.2024 - 00:29 *

Hi,

We have seen this issue sometimes coming in some direction which are not perpendicular to the bars or when there is different angle other than 90°.

We find some trick. For example if your design again the bars with the correct dimension, the bars in the left view will be correct at first.
If you do any change like stretch a segment, than the issue will appears. (so try to do it right first -) ).

A second possible is to redo the bars just by using the tool "convert and match a bars", than you click on your wrong bars to bring the geometry and the new will be corrected.

Bye

Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support

Allplan France & Allplan Software Engineering

Depuis 2006

Anhänge (1)

Typ: image/jpeg

18-mal heruntergeladen

Größe: 45,43 KiB

Judy_Allpl…

11.01.2024 - 00:29 * [Hilfreichste Antwort]

Hi,

We have seen this issue sometimes coming in some direction which are not perpendicular to the bars or when there is different angle other than 90°.

We find some trick. For example if your design again the bars with the correct dimension, the bars in the left view will be correct at first.
If you do any change like stretch a segment, than the issue will appears. (so try to do it right first -) ).

A second possible is to redo the bars just by using the tool "convert and match a bars", than you click on your wrong bars to bring the geometry and the new will be corrected.

Bye

Mr Judy GURAVADU
Responsable Technique Préfabrication & Ingénierie
Precast Sales & Support

Allplan France & Allplan Software Engineering

Depuis 2006

Anhänge (1)

Typ: image/jpeg

18-mal heruntergeladen

Größe: 45,43 KiB

« Zurück