[Otázka] Create PythonPart without polyhedron

llawliet2812
llawliet28…
28.09.2023 - 14:42

Hello forum, as I am learning Allplan PythonPart with the Reinforcement examples, In most of them (Closed Stirrup, Open Stirrup, etc) when you create the PythonPart it always comes with a polyhedron and the reinforcement part.

I want to create a PythonPart with just the reinforcement, but when i tried to change/delete the polyhedron in the code it always results in error or the reinforcement is not selectable after placement. Is there a way to change the example code so that it would return self.create_reinfocement() and handles as a PythonPart?

Many thanks and wish you all a good day!

Show most helpful answer Hide most helpful answer

bmarciniec
bmarciniec
28.09.2023 - 15:22 *

Hi!
What you have to do is construct the BarPlacement object and append it directly to the CreateElementResult object

def create_element(build_ele, doc) -> CreateElementResult:

    ...

    placement = AllplanReinf.BarPlacement(...)

    model_ele_list = []
    model_ele_list.append(placement)

    return CreateElementResult(elements = model_ele_list)

In the examples you are talking about, firstly a PythonPart-container is created, to which the placement is appended. Then the container is appended to the list of the objects to create in the model (model_ele_list). Just append the placement directly to model_ele_list. I attached an example, that does just that (it will be part of Allplan 2024). I am not sure, if you have access to the pre release 2024 version, because I suspect, the example will not work in 2023. That's because the syntax is aligned with python 3.11.4, and in 2023 we still have the python 3.8.8

Přílohy (1)

BarShape.zip
Type: application/zip
Staženo 294
Size: 5,68 KiB
bmarciniec
bmarciniec
28.09.2023 - 15:22 * [Nejužitečnější příspěvek]

Hi!
What you have to do is construct the BarPlacement object and append it directly to the CreateElementResult object

def create_element(build_ele, doc) -> CreateElementResult:

    ...

    placement = AllplanReinf.BarPlacement(...)

    model_ele_list = []
    model_ele_list.append(placement)

    return CreateElementResult(elements = model_ele_list)

In the examples you are talking about, firstly a PythonPart-container is created, to which the placement is appended. Then the container is appended to the list of the objects to create in the model (model_ele_list). Just append the placement directly to model_ele_list. I attached an example, that does just that (it will be part of Allplan 2024). I am not sure, if you have access to the pre release 2024 version, because I suspect, the example will not work in 2023. That's because the syntax is aligned with python 3.11.4, and in 2023 we still have the python 3.8.8

Přílohy (1)

BarShape.zip
Type: application/zip
Staženo 294
Size: 5,68 KiB
cmaignan35
cmaignan35
29.09.2023 - 07:28

Citoval llawliet2812
Hello forum, as I am learning Allplan PythonPart with the Reinforcement examples, In most of them (Closed Stirrup, Open Stirrup, etc) when you create the PythonPart it always comes with a polyhedron and the reinforcement part.
I want to create a PythonPart with just the reinforcement, but when i tried to change/delete the polyhedron in the code it always results in error or the reinforcement is not selectable after placement. Is there a way to change the example code so that it would return self.create_reinfocement() and handles as a PythonPart?
Many thanks and wish you all a good day!

Hi,

Please note that we can create a geometry for help building the reinforcement but we don't need to add this geometry to 2d and/or 3d view

I will create soon few new examples for reinforcement but you can look at this (old) one

Best

Přílohy (1)

poteau.zip
Type: application/zip
Staženo 277
Size: 6,34 KiB
llawliet2812
llawliet28…
02.10.2023 - 15:25

Citoval cmaignan35

Quote by llawliet2812Hello forum, as I am learning Allplan PythonPart with the Reinforcement examples, In most of them (Closed Stirrup, Open Stirrup, etc) when you create the PythonPart it always comes with a polyhedron and the reinforcement part.

I want to create a PythonPart with just the reinforcement, but when i tried to change/delete the polyhedron in the code it always results in error or the reinforcement is not selectable after placement. Is there a way to change the example code so that it would return self.create_reinfocement() and handles as a PythonPart?

Many thanks and wish you all a good day!
Hi,
Please note that we can create a geometry for help building the reinforcement but we don't need to add this geometry to 2d and/or 3d view
I will create soon few new examples for reinforcement but you can look at this (old) one
Best

Hi cmaignan35,

I followed your script and the geometry is invisible on the 2D3D view, but I also could not select the reinforcement part to edit the PythonPart. It looks like the whole reinforcement is unselectable. Do you have a workaround for this?

cmaignan35
cmaignan35
03.10.2023 - 06:48 *

Hi,

Here the update.

To keep a parametric object, I simply add in help construction the footprint of my element to be reinforced.

Please note : this tip also works when you have an element from the library and you want to keep it as a pythonpart (link here)

Best
Christophe

Edit:
As mentioned previously, this is an old example and many things have evolved since it was written (reference point, altimetry, text hook, ...)

I will soon make updated examples

Přílohy (1)

poteau.zip
Type: application/zip
Staženo 271
Size: 6,53 KiB
https://campus.allplan.com/ používá cookies  -  Více informací

Souhlasím