Allplan Forum: Exporting Allplan models in IFC format does not work

ricmerz

09.05.2020 - 14:59

Exporting allplan models in IFC format does not work. The generated models have wrong levels. I have tried in several projects with the same result. In attachment A1, the original Allplan project level system.

Attachment A2 shows the level system resulting from importing into Allplan the same project, previously exported as IFC, directly from allplan. As you can see, the levels correspond correctly.

Attachment shows 3 the import in Allplan of the IFC generated by bimplus.

Anhänge (3)

Typ: image/png

54-mal heruntergeladen

Größe: 146,85 KiB

Typ: image/png

36-mal heruntergeladen

Größe: 120,60 KiB

Typ: image/png

34-mal heruntergeladen

Größe: 146,91 KiB

ricmerz

13.05.2020 - 13:07

The example above is a project whose structure is not IFC compliant. I have tried a new one from scratch, conforming to IFC.
The following screenshots show the results of the importation in Allplan

C1 Import report. In addition to the mapping problem, see that the windows have not been created
C2 Level structure: the floor structure is correct, but the drawing files are not on their corresponding floor. The level system is completely wrong.

Anhänge (2)

Typ: image/jpeg

23-mal heruntergeladen

Größe: 780,79 KiB

Typ: image/jpeg

17-mal heruntergeladen

Größe: 780,79 KiB

pavoln

14.05.2020 - 07:29

Hello,

thank you for reporting. We are investigating it and I will let you know as soon as I will have more info.

Best,
Pavol Nagy

pavoln

20.05.2020 - 14:36

Zitiert von: ricmerz

The example above is a project whose structure is not IFC compliant. I have tried a new one from scratch, conforming to IFC.
The following screenshots show the results of the importation in Allplan
C1 Import report. In addition to the mapping problem, see that the windows have not been created
C2 Level structure: the floor structure is correct, but the drawing files are not on their corresponding floor. The level system is completely wrong.

Dear Mr. Rizmerz,

I have not seen your attachment regarding "C1 Import report. In addition to the mapping problem, see that the windows have not been created".
Could you attach it here?

Thank you

ricmerz

21.05.2020 - 09:34

Sorry, I attached twice C2 screeshot

Anhänge (1)

Typ: image/jpeg

35-mal heruntergeladen

Größe: 1,00 MiB