[Frage] Make Group Ctrl + G

Schlagworte:
  • Allplan 2019
  • Group things/text
JanWillem
JanWillem
05.04.2019 - 09:20

While working with allplan 2019,
Working with Line's, Reinforcments enzz...

Ass in all other program's,
Office/Adobe/enzz

There is a command Ctrl+G
Group things together.

And then that group can be selected together ad oncé.
And then to be moved/copy'd whatever is needed.

I haven't found a command like that ad allplan 2019, but verry handy tool.
Any one found an solution to that, or handy way to work?

Anhänge (1)

img
Ctrl+G.PNG
Typ: image/png
11-mal heruntergeladen
Größe: 10,01 KiB

Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen

Bertrand_C
Bertrand_C
05.04.2019 - 09:46 *

Hello,
There is something similar in Allplan: "Group number".
When several elements have the same group number, they can be selected at once.
For that, apply the same Group number to the elements with the function "Modify Format Properties" (see online help).
For selecting the group by mouse: middle click on nothing and then left click on one of the elements of the group. The result is that all the elements of the group will be selected.
This works also on "Symbols".


Bertrand_C
Bertrand_C
05.04.2019 - 09:46 * [Hilfreichste Antwort]

Hello,
There is something similar in Allplan: "Group number".
When several elements have the same group number, they can be selected at once.
For that, apply the same Group number to the elements with the function "Modify Format Properties" (see online help).
For selecting the group by mouse: middle click on nothing and then left click on one of the elements of the group. The result is that all the elements of the group will be selected.
This works also on "Symbols".


JanWillem
JanWillem
05.04.2019 - 11:48

Does not work with reinforcement bars, or combined.
Just for line's/text

Bertrand_C
Bertrand_C
05.04.2019 - 13:23 *

Yes, on reinforcement, this is not working, sorry.
But it works for most of the Allplan objects, including walls, columns, beams, SmartParts, etc.
For reinforcement elements, maybe there is another way of use (I'm not a specialist in Engineering domain).
Did you look at the filters?...
So, please, ask to your Allplan contact or to the support.


FMueller
FMueller
11.04.2019 - 07:19

Zitiert von: JanWillem
Does not work with reinforcement bars, or combined. Just for line's/text

Yes and no.
If you press the middle mouse button or better the shift key, then you mark all bars of a placement.
If you hold down Control + Shift afterwards, you can mark several placements with the left mouse button without having to mark every single bar.

Kind regards,
Florian

Florian Müller
Support Engineer

ALLPLAN Deutschland GmbH
Konrad-Zuse-Platz 1
81829 Munich, Germany

JanWillem
JanWillem
11.04.2019 - 10:48

Al the ticks/klicks enzz needed to go to a selection,
Costs so many time, en doing it over and over.

Off cours you can load/ad them to a view enzz enzz..
But when you place them over each other, you still have to use a filter. combine filters enzz.

Just a lott of useless actions to go from A to B.

If there are users from allplan, who also use program's from adobe or other 3d program's.
They know what you miss with this.