09.11.2020 - 15:26
Hi, someone can tell me the 3D code for rotate the diagonal face? Solid created with command "prism". Thank you.
- Forum
- CAD Parametrische Modellierung
- CAD SmartParts
[Frage] Code 3d for rotation
Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen
10.11.2020 - 06:53
*
Have a look at the smartpart "Test.smt"
Master-Script:
eps=0.00001
x = TAN ( c ) * a / 2
Parameter-Script:
VALUES c RANGE [-atan(b/(a/2)),atan(b/(a/2))]
3D-Script:
HANDLE b , 0 , 0 , id , "c" , 4
HANDLE b + x , 0 , 0 , id , "c" , 5
HANDLE b , a / 2 , 0 , id , "c" , 6 + 1024
HANDLE 0 , 0 , 1 , id , "c" , 7
PUT 0 , 0
PUT b + x , 0
PUT b - x , a
PUT 0 , a
PUT 0 , 0
PRISM NUM_SP / 2 , s ,
GET ( NUM_SP )
Anhänge (1)
09.11.2020 - 16:08
Hello,
You have (just) to calculate the position of the moved points...
This is a geometry issue, not a code issue.
09.11.2020 - 16:31
Zitiert von: Bertrand_C
Ciao,
Devi (solo) calcolare la posizione dei punti spostati ...
Devi (solo) calcolare la posizione dei punti spostati ...
Questo è un problema di geometria, non un problema di codice.
Thank you for your specification but maybe I didn't explain myself well ...I meant the code for "handle" of rotation.
10.11.2020 - 06:53
*
[Hilfreichste Antwort]
Have a look at the smartpart "Test.smt"
Master-Script:
eps=0.00001
x = TAN ( c ) * a / 2
Parameter-Script:
VALUES c RANGE [-atan(b/(a/2)),atan(b/(a/2))]
3D-Script:
HANDLE b , 0 , 0 , id , "c" , 4
HANDLE b + x , 0 , 0 , id , "c" , 5
HANDLE b , a / 2 , 0 , id , "c" , 6 + 1024
HANDLE 0 , 0 , 1 , id , "c" , 7
PUT 0 , 0
PUT b + x , 0
PUT b - x , a
PUT 0 , a
PUT 0 , 0
PRISM NUM_SP / 2 , s ,
GET ( NUM_SP )
Anhänge (1)
10.11.2020 - 07:43
Zitiert von: Nemo
Have a look at the smartpart "Test.smt"
Master-Script:
Master-Script:
eps=0.00001
x = TAN ( c ) * a / 2
Parameter-Script:
VALUES c RANGE [-atan(b/(a/2)),atan(b/(a/2))]
3D-Script:
HANDLE b , 0 , 0 , id , "c" , 4
HANDLE b + x , 0 , 0 , id , "c" , 5
HANDLE b , a / 2 , 0 , id , "c" , 6 + 1024
HANDLE 0 , 0 , 1 , id , "c" , 7
PUT 0 , 0
PUT b + x , 0
PUT b - x , a
PUT 0 , a
PUT 0 , 0
PRISM NUM_SP / 2 , s ,
GET ( NUM_SP )
Hi Nemo, this is the code I was looking for. Thank you for help! Goodbye.