16.10.2024 - 16:11
Hi, it's possible to introduce a scale factor to enlarge or reduce all the elements of a smartpart?
- Forum
- CAD Parametrische Modellierung
- CAD SmartParts
[Frage] Scale factor for smartpart
16.10.2024 - 16:38
Hello Danilos,
Yes, of course, but it depends on how the SmartPart was developed. Anything is possible, but sometimes it's not so simple.
16.10.2024 - 18:49
...perhaps it is easier to enlarge or reduce the SmartPart using the Allplan “Scale” function.
17.10.2024 - 12:46
Thank you Bertrand and Nemo for info. Certainly it's easier with Allplan "scale" function but with this command the parameters of smartpart are not scaled.
17.10.2024 - 18:29
Certainly it's easier with Allplan "scale" function but with this command the parameters of smartpart are not scaled.
Isn't that just great?
If you really want to have the parameters scaled: Nothing could be easier:
1. add the “Factor” parameter
Value < 1.0 = reduce, value > 1.0 = increase
2. multiply all necessary values in the script by this
factor
Done!
18.10.2024 - 13:26
Zitiert von: Nemo
Certainly it's easier with Allplan "scale" function but with this command the parameters of smartpart are not scaled.
Isn't that just great?If you really want to have the parameters scaled: Nothing could be easier:
1. add the “Factor” parameter
Value < 1.0 = reduce, value > 1.0 = increase
2. multiply all necessary values in the script by this
factor
Done!
Thank you Nemo for clarification.I didn't think it was that simple . Goodbye.