[Вопрос] Fasche 2.0


Hallo,

ich habe diese Frage schon in einem andern Forum gestellt und habe leider noch keine Antwort bekommen :/
Vielleicht kann mir ja hier jemand weiterhelfen. Es geht um Faschen ich habe mir in dem andern Forum
eine Fasche heruntergeladen und das funktioniert auch alles sehr gut vielen dank nochmal dafür.
Nur kann ich der Fasche keine schräge Laibung geben gibt es da irgendeine Möglichkeit ?
Auch kann ich die Laibung nicht von der Wand abziehen ( wie im Anhang) nutze ich die Fasche einfach nur Falsch oder
muss ich mir mein eigenes smart Objekt schreiben ?
Und wenn ich mir mein eigenes Smart Objekt schreiben muss wie mach ich das am besten

Gruß Moritz

Вложения (1)

Type: image/jpeg
Загружено 652 раз
Size: 63,12 KiB

Show most helpful answer Hide most helpful answer

Hallo,

anbei die Fasche mit schräger Leibung.
Das Abziehen eines (dann ja) Gewändes war nicht das Ziel der (Putz-)Fasche.
Dazu bräuchte man sicher ein neue SmartPart "Fenster-Gewände".

Mit der jetzigen Fasche geht es auch, es wird mit dem Abziehen von der Wand etwas "tricky".
Von Wänden ziehen sich nämlich nur Öffnungen ab!
D.h. man müsste mit 2 Öffnungen arbeiten:
1. Öffnung für Gewände -um Gewände-dicke größer als eigentliche Öffnung, aber nur so tief wie Gewände
-> dort Fasche mit entspr. Dicke einbauen
2. Öffnung für eigentliches Fenster

Gruß Jörg

Вложения (2)

Type: image/png
Загружено 916 раз
Size: 552,71 KiB
Type: application/xml
Загружено 2132 раз
Size: 31,37 KiB
31 - 38 (38)

Goodmorning, is it possible to obtain the print as the sketch with the use of smartpart "gewaende"? I don't want internal lines but only fill grey! Thank you for your information.

Вложения (1)

Type: image/jpeg
Загружено 85 раз
Size: 129,38 KiB

Thats impossible with SmartParts.
Why do you not use allplan built-in "Verblendung"?

Цитируется из: Nemo
Thats impossible with SmartParts.
Why do you not use allplan built-in "Verblendung"?

Thank you Nemo for information. I use smartpart "gewaende" when I have windows or door with arch because built-in verblendung it's not possible with arc. Do you have alternatives to make internal covering in arched openings and that allows printing as per my sketch? Goodbye.

As Workaround you can do following:

1. Remove unwanted lines from wall-opening with Allplan-function "Architekturlinien ein, -ausblenden"
2. Adapt SmartPart, that in the 2D-Script this unwanted lines are not drawn

Good luck!

Цитируется из: Nemo
As Workaround you can do following:
1. Remove unwanted lines from wall-opening with Allplan-function "Architekturlinien ein, -ausblenden"
2. Adapt SmartPart, that in the 2D-Script this unwanted lines are not drawn
Good luck!

Thank you Nemo for your information but for me it's very difficult your option 2 because I should modify not all the lines but only some and smartpart it's with section variable.
I think it's better to use internal fill black instead grey. Goodbye.

Цитируется из: Danilos

Zitiert von: Nemo As Workaround you can do following:
1. Remove unwanted lines from wall-opening with Allplan-function "Architekturlinien ein, -ausblenden"
2. Adapt SmartPart, that in the 2D-Script this unwanted lines are not drawn
Good luck!

Thank you Nemo for your information but for me it's very difficult your option 2 because I should modify not all the lines but only some and smartpart it's with section variable.
I think it's better to use internal fill black instead grey. Goodbye.

Here is the new sketch.

Вложения (1)

Type: image/jpeg
Загружено 202 раз
Size: 98,81 KiB

Nice, just do it!

31 - 38 (38)