[Вопрос] Restructuration


Goodmorning, does anyone know if it is possible, after applying the restructuring commands and use of appropriate area styles in a case as in the photo, to make the yellow filling appear in the sectioned surface (see red asterisk) of the associative sections? Thank you.

Вложения (1)

Type: image/jpeg
Загружено 167 раз
Size: 159,79 KiB

Show most helpful answer Hide most helpful answer

see here

Вложения (1)

Type: video/mp4
Загружено 766 раз
Size: 2,18 MiB
1 - 10 (25)

see here

Вложения (1)

Type: video/mp4
Загружено 766 раз
Size: 2,18 MiB

...and here

Вложения (1)

Type: video/mp4
Загружено 891 раз
Size: 4,66 MiB

Thank you very much Nemo for your video. Your method it's with the use wall command and not specific command of restructuration.I was looking with restructuration command which is moore immediate

quick and dirty, maybe this one could be usefull. i am not sure about the opening inside another opening...

Viele Grüße
Florian

LinkedIn-Profil

www.vollack.de

Вложения (1)

Type: video/mp4
Загружено 883 раз
Size: 5,68 MiB

Thak you fkeim for your video. Another solution! In this case, however, additional elements such as the 2 demolition windows should be created. In some videotutorials related to the restructuring it is explained that it is possible to insert a new window inside the demolished one, however some colleagues tell me that after having done the various procedures and after having performed a vertical associative section, the yellow fills of the 2 bodies do not appear of demolition.

Цитируется из: Danilos
...
In some videotutorials related to the restructuring it is explained that it is possible to insert a new window inside the demolished one...

It is possible, following the instructions in the tutorial available at connect "Allplan 2022 Schritte zum Erfolg Umbau"

Вложения (1)

Type: application/x-rar
Загружено 888 раз
Size: 4,10 MiB

Цитируется из: mtl

Quotato da: Danilos...

In some videotutorials related to the restructuring it is explained that it is possible to insert a new window inside the demolished one...
It is possible, following the instructions in the tutorial available at connect "Allplan 2022 Schritte zum Erfolg Umbau"


Thank you mtl for info but your attachment gives an error. Can you send again? Thank you.

I have reduced the size a little bit, maybe now

Вложения (1)

Type: video/mp4
Загружено 696 раз
Size: 3,48 MiB

From a structural point of view, you would certainly have to install a lintel at the top!
But this is only my personal opinion, respecting physical facts like gravity.

1 - 10 (25)