Combine 2 rebar Label lines into 1. [Решен]

Теги:
  • Allplan
  • Rebar
  • Labels

Hello, i couldn't find a direct answer in the forum so i hope someone can help.
I have two short questions regarding (1) joining 2 rebar labels into 1 and (2) starting the placement on both sides from 0 distance. There are times when there is 12cm left on displacement which could fit and extra bar with s=15cm.
Thank you in advance and please find attached an Illustration of my questions.

Вложения (1)

Type: image/png
Загружено 142 раз
Size: 71,28 KiB

Show solution Hide solution

Ad1. (1.jpg)you can do it by superimposing dimension lines on yourself and (unfortunately) manual and adding 2x in front of the text.

You can insert additional text with position - >> description (unfortunately only 2 characters, the appropriate positions to be behind the "circle" must be set in the options)

Ad2. (2.jpg)You have to remember about this when unfolding the bars (creating the distribution of bars). You must set the concrete cover to 0. (3.jpg)You can change it later by setting a new distribution area and zeroing the concrete covers, and creating a new distribution with two clicks. (Remember that both concrete covers need to be set to 0, so set them to 0 before each click)
I also recommend this setting see green circle).

Вложения (3)

Type: image/jpeg
Загружено 108 раз
Size: 306,48 KiB
Type: image/jpeg
Загружено 72 раз
Size: 43,49 KiB
Type: image/jpeg
Загружено 96 раз
Size: 229,51 KiB

Ad1. (1.jpg)you can do it by superimposing dimension lines on yourself and (unfortunately) manual and adding 2x in front of the text.

You can insert additional text with position - >> description (unfortunately only 2 characters, the appropriate positions to be behind the "circle" must be set in the options)

Ad2. (2.jpg)You have to remember about this when unfolding the bars (creating the distribution of bars). You must set the concrete cover to 0. (3.jpg)You can change it later by setting a new distribution area and zeroing the concrete covers, and creating a new distribution with two clicks. (Remember that both concrete covers need to be set to 0, so set them to 0 before each click)
I also recommend this setting see green circle).

Вложения (3)

Type: image/jpeg
Загружено 108 раз
Size: 306,48 KiB
Type: image/jpeg
Загружено 72 раз
Size: 43,49 KiB
Type: image/jpeg
Загружено 96 раз
Size: 229,51 KiB

Thank you! It solved both my issues perfectly.