[Frage] Fasche 2.0


Hallo,

ich habe diese Frage schon in einem andern Forum gestellt und habe leider noch keine Antwort bekommen :/
Vielleicht kann mir ja hier jemand weiterhelfen. Es geht um Faschen ich habe mir in dem andern Forum
eine Fasche heruntergeladen und das funktioniert auch alles sehr gut vielen dank nochmal dafür.
Nur kann ich der Fasche keine schräge Laibung geben gibt es da irgendeine Möglichkeit ?
Auch kann ich die Laibung nicht von der Wand abziehen ( wie im Anhang) nutze ich die Fasche einfach nur Falsch oder
muss ich mir mein eigenes smart Objekt schreiben ?
Und wenn ich mir mein eigenes Smart Objekt schreiben muss wie mach ich das am besten

Gruß Moritz

Anhänge (1)

Typ: image/jpeg
648-mal heruntergeladen
Größe: 63,12 KiB

Hilfreichste Antwort anzeigen Hilfreichste Antwort verbergen

Hallo,

anbei die Fasche mit schräger Leibung.
Das Abziehen eines (dann ja) Gewändes war nicht das Ziel der (Putz-)Fasche.
Dazu bräuchte man sicher ein neue SmartPart "Fenster-Gewände".

Mit der jetzigen Fasche geht es auch, es wird mit dem Abziehen von der Wand etwas "tricky".
Von Wänden ziehen sich nämlich nur Öffnungen ab!
D.h. man müsste mit 2 Öffnungen arbeiten:
1. Öffnung für Gewände -um Gewände-dicke größer als eigentliche Öffnung, aber nur so tief wie Gewände
-> dort Fasche mit entspr. Dicke einbauen
2. Öffnung für eigentliches Fenster

Gruß Jörg

Anhänge (2)

Typ: image/png
912-mal heruntergeladen
Größe: 552,71 KiB
Typ: application/xml
2002-mal heruntergeladen
Größe: 31,37 KiB
31 - 38 (38)

Goodmorning, is it possible to obtain the print as the sketch with the use of smartpart "gewaende"? I don't want internal lines but only fill grey! Thank you for your information.

Anhänge (1)

Typ: image/jpeg
83-mal heruntergeladen
Größe: 129,38 KiB

Thats impossible with SmartParts.
Why do you not use allplan built-in "Verblendung"?

Zitiert von: Nemo
Thats impossible with SmartParts.
Why do you not use allplan built-in "Verblendung"?

Thank you Nemo for information. I use smartpart "gewaende" when I have windows or door with arch because built-in verblendung it's not possible with arc. Do you have alternatives to make internal covering in arched openings and that allows printing as per my sketch? Goodbye.

As Workaround you can do following:

1. Remove unwanted lines from wall-opening with Allplan-function "Architekturlinien ein, -ausblenden"
2. Adapt SmartPart, that in the 2D-Script this unwanted lines are not drawn

Good luck!

Zitiert von: Nemo
As Workaround you can do following:
1. Remove unwanted lines from wall-opening with Allplan-function "Architekturlinien ein, -ausblenden"
2. Adapt SmartPart, that in the 2D-Script this unwanted lines are not drawn
Good luck!

Thank you Nemo for your information but for me it's very difficult your option 2 because I should modify not all the lines but only some and smartpart it's with section variable.
I think it's better to use internal fill black instead grey. Goodbye.

Zitiert von: Danilos

Zitiert von: Nemo As Workaround you can do following:
1. Remove unwanted lines from wall-opening with Allplan-function "Architekturlinien ein, -ausblenden"
2. Adapt SmartPart, that in the 2D-Script this unwanted lines are not drawn
Good luck!

Thank you Nemo for your information but for me it's very difficult your option 2 because I should modify not all the lines but only some and smartpart it's with section variable.
I think it's better to use internal fill black instead grey. Goodbye.

Here is the new sketch.

Anhänge (1)

Typ: image/jpeg
200-mal heruntergeladen
Größe: 98,81 KiB

Nice, just do it!

31 - 38 (38)

Verwendung von Cookies:
Um die Webseite optimal gestalten und fortlaufend verbessern zu können, verwendet Allplan Cookies.
Durch die weitere Nutzung der Webseite erklären Sie sich mit der Verwendung von Cookies einverstanden.  -  Mehr Informationen

Schließen