Hello,
When I introduce new bar shape, I can see, that for example: rebar #16 is thicker than #12. But when I use Layout Editor to print reinforcement drawing rebars thickness are the same and depends on pen thickness (-> attach file). Could You tell me how can I change it and get real rebar diameter in drawing? Sorry for my English.
Hello,
You can create custom pen thicknesses and after you finish the drawing, change the format properties using Rebar filters-By Diameter.
Is this a requirement from your drawing standard or something you'd like to do to improve your drawing's appearance?
There is also the posibility of using a color code by mark or diameter size which you cand apply in the same manner using Change format properties and Rebar Filters - diametre/mark.
Best regards,
Ciprian
eng. Ciprian Popa
I would like to improve drawing's apperance. And I think that change the format properties using Rebar filters-By Diameter is good solution, because of I can choose all #8-10 rebars and set 0,18 pen thickness, #12 - 0,25 etc. And what is the most important, it will take me 1-2 minutes.
Thank you for all your help.
Best regards,
Przemek
I'm glad it helped.
Ciprian
eng. Ciprian Popa
I used bars as filling layout, but then on PDFs it came out with a thin white frame on each bars ... you got the same ?
