Allplan Forum: Incorrect wall (wand) joins with different layers (schichten)

EiPM_Xavi

09.05.2014 - 10:29 Uhr

Hi!

We have a little problem with walls (wands) with different layers (schichten), when those walls are situated in a corner (see the attached image)

The only way to solve it is using the tool "Join Linear Component with Line" (Linienbauteil an Linie). But if we need to use the tool "Update 3D" -> "Recreate" (3D Aktualisieren -> Rekonst, we have to use again the tool "Join Linear Component with Line" (Linienbauteil an Linie) on every wall.

Any solution?
Thanks a lot!
Xavier C.A.

Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/

Anhänge (3)

Typ: image/png

312-mal heruntergeladen

Größe: 12,87 KiB

WALL.ndw

Typ: application/octet-stream

842-mal heruntergeladen

Größe: 384,22 KiB

Typ: image/png

234-mal heruntergeladen

Größe: 17,63 KiB

Klaus_Leud…

12.05.2014 - 08:29 Uhr

Can you append your example as NDW ?

Klaus

EiPM_Xavi

13.05.2014 - 07:55 Uhr

[/quote]

Zitiert von: Klaus_Leuders

Can you append your example as NDW ?

Klaus

Hi Klaus!

In my first post, we attached a ndw file

Best regards!
Xavier C.A.

Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/

joerggeier

13.05.2014 - 13:12 Uhr

Use Correct Priority in the walls combined with the options shown below:
Greetings
Jörg Geier

Software: Allplan, Lumion, OM by Cycot, FM by Cycot, Nevaris...
Coachings unter http://www.cycot.de / Tutorials unter http://www.allplanlernen.de

Anhänge (1)

Typ: image/png

247-mal heruntergeladen

Größe: 103,88 KiB

EiPM_Xavi

13.05.2014 - 13:32 Uhr

Hi Joerg, and thanks to answer :-)

Well, the walls of my first post have the correct priority (see the file "WALL.ndw" of my first post). I explained your solution in my first post: :-)

Zitiert von: EiPM_Xavi

The problem is in walls with corner joints. Although we draw the walls with correct priority, Allplan doesn't solve this corner union automatically.

Best regards,
Xavier C.A.

Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/

zum_loesch…

13.05.2014 - 14:16 Uhr

in wich case are you using 3Dakt with rekonst?

I'm not using this very often.... once every half year..

Namenlos gezeichnet in vollem Bewusstsein - ignorant, in eigen Augen vermutlich höflich, dennoch unhöflichst, unfreundlichst wer einen/viele vermutete - sich von alters erschließende Namen nennt.
08.01.2024 - Gegen Bauernsperren! -> Boykott der direktverkaufenden Bauern - kauft nicht mehr direkt bei Bauern!

EiPM_Xavi

21.05.2014 - 12:12 Uhr

Hi Markus,

Well, the problem isn't "use or not use" the tool "3D Aktualisieren -> Rekonst"

The problem of the priority exist, and when we work in big projects, we think that to use the tool "Linienbauteil an Linie" to solve correctly all the "unions between walls" is improductive, and a waste of time.

We attach another image, to show more incorrect unions between walls.

Best regards,
Xavier C.A.

Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/

Anhänge (2)

Typ: image/png

226-mal heruntergeladen

Größe: 16,00 KiB

Incorrect Prority.ndw

Typ: application/octet-stream

882-mal heruntergeladen

Größe: 416,22 KiB

EiPM_Xavi

21.05.2014 - 14:58 Uhr

There are a lot of situations that we are wasting of time to solve incorrect unions between walls, because of the problem of wall priorities.

For example, another tipical situation: cover columns with a wall (see attached images)

Xavier Coll • Architect, Project Manager I+D, BIM Manager, BIM Auditor
EiPM • http://www.eipm.es/en/

Anhänge (3)

01 Typical situation - cover columns.png

Typ: image/png

241-mal heruntergeladen

Größe: 11,66 KiB

Typ: image/png

244-mal heruntergeladen

Größe: 18,11 KiB

Typ: image/png

220-mal heruntergeladen

Größe: 15,09 KiB