MINIMUM REQUIREMENTS:
- Intel processor or compatible
- 4 GB RAM
- 10 GB free hard disk space
- OpenGL 4.2 compatible graphics board, 2 GB RAM, resolution 1280 x 1024
RECOMMENDATION:
- Intel Core i5, i7 or i9 processor or compatible
- 16 GB RAM
- Screen resolution up to 2560 x 1600 (for higher resolutions as of 4K the scaling of the operating system can be used (Windows 8.1 or later); multiple monitors should be operated with the same resolution)
- OpenGL 4.2 compatible graphics board with 8 GB RAM, graphics board in accordance with certification www.allplan.com/info/graphiccards
SUPPORTED OPERATING SYSTEMS:
- Windows 10, 64 bit, version 1709 *
- Windows 8.1, 64 bit
- Windows 7, 64 bit, Service Pack 1
- Windows Server 2016, Standard-Edition (for Citrix)
- Windows Server 2012 R2, Standard-Edition (for Citrix)
SUPPORTED DATA SERVERS FOR DATA STORAGE:
- Windows Server 2016
- Windows Server 2012 R2
- Windows Storage Server 2016 for NAS
RECOMMENDATION OPERATING SYSTEM:
- Windows 10, 64 bit, version 1709 *
RECOMMENDATION DATA SERVER FOR DATA STORAGE:
- Windows Server 2016
* (LTSB/LTSC version excluded)
Use our system test to determine whether your PC meets the technical requirements for Allplan 2019. Download the system test file. The system test will run automatically when the tool is started and will check how suitable your computer is for the new version of Allplan.
MINIMUM SERVER SETUP FOR UP TO 5 ALLPLAN USERS:
- Intel Xeon processor or compatible
- 48 GB RAM
RECOMMENDED SERVER SETUP FOR UP TO 5 ALLPLAN USERS:
- 2 x Intel Xeon processor with at least 2 GHz each
- 64 GB RAM
- Server graphics card for vGPU Usage (e.g. NVIDIA Grid) with at least 2 GB per user
RECOMMENDED SERVER SETUP FOR MORE THAN 5 ALLPLAN USERS:
- You need a separate server for every five Allplan users. Make sure that each server meets the requirements stated above.
* for Citrix Virtual Desktops
- Citrix Virtual Desktops Standard 7 1808 / Windows 10 Pro 64-bits for virtual desktop
- WIBU license server on a separate server
- Allplan 2019-0-1 or later
NOTES / RESTRICTIONS:
- The Allplan performance under Citrix depends on the network performance and can be somewhat slower compared to local installations.
- An external connection requires a high-performance setup: a latency of not more than 20 milliseconds; download bandwidth of at least 16 Mbit/s (recommended: 25 Mbit/s); upload at least 5 Mbit/s.
- You are advised to set the size of the crosshairs to off (cursor only) in the Allplan options.
* for Citrix Virtual Desktops
Hardware recommended for Citrix servers varies depending on the Windows Server Edition. You can find recommendations for these editions on the Microsoft website:
microsoft.com
Information on configuring, optimizing and running Citrix can be found on the Citrix website:
support.citrix.com
- A new Allplan Exchange Online service is available since 24.04.2023.
- Since then, the use of the Allplan Exchange Online service is only possible in connection with Allplan version 2023 or higher.
- The web address of Allplan Exchange remains unchanged: https://exchange.allplan.com
- MacBook Pro or iMac as of end 2015
- Intel Core i5, i7 or i9 Processor
- 16 GB RAM
- 50 GB free hard disk space
- Graphics board by AMD or NVIDIA (Note: Because Parallels does not support OpenGL 3.3, Allplan uses GDI+ and the video card is shown as "unsuitable" in the system test)
- macOS Mojave 10.14
- Parallels Desktop 14 for Mac
- Windows 10 64 bits, version 1803
NOTES
- A trial license cannot be used under Parallels.
- Since Parallels Desktop does not support OpenGL 3.3, Allplan uses GDI+ and this graphics card is shown as "unsuitable" in the system test.
- In Allplan, under Options > Display > Hardware acceleration Graphics > "Use OpenGL for graphics window" must be deactivated.
* With Parallels Desktop 14