[Вопрос] 3D surfaces


Hi,

How to make 3D surface from 4 points not in the same plane?
I need to make it, but I have this error:

Another option is to make surface in one plane, and then move needed point by Stretch Entities.
But surface will be not correct...

Kind regard,
Igors

1 - 2 (2)
  • 1

Dear Igors,

If your 4 point are not place on the same plane than you can't use the direct tool Surface, because surface means one element of minimum 3 points.

So if you have 4 points to define and you don't now the plane definition, you can use the tool named "Three-point Canopy, Four-point Canopy".

And than you will be able to define you surface as you want, like minimum 2 triangle or more.
You can set all division to minimum 2 edge and 0% for the Sag.

With this tool, you can define a surface or a volume.

Bye & Good Use

Mr Judy GURAVADU
Responsable Technique Préfabrication
Precast Sales & Support

Precast Software Engineering

Вложения (2)

img
Canopy tool.JPG
Type: image/jpeg
Загружено 60 раз
Size: 11,01 KiB
img
example2.JPG
Type: image/jpeg
Загружено 64 раз
Size: 15,45 KiB
1 - 2 (2)
  • 1

https://campus.allplan.com/ uses cookies  -  More information

Accept