Результат поиска

1 - 6 (6)
  • 1
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 17.06.2021 11:09

Question:

How can I import data from an earlier version?



Answer:

You can import data from the last three Allplan versions.
Consequently, the following import operations are possible:

Target version <- import possible from version

2017 <- 2014
2016 <- 2013
2015 <- 2012
2014 <- 2011
2013 <- 2009
2012 <- 2008
2011 <- 2006
2009 <- 2005
2008 <- 2004
2006 <- 2003
2005 <- 17
2004 <- 16

We cannot guarantee that data created in older versions can be imported and edited. The conversion of older data may be incomplete, which may affect intelligent components in particular.


1. Archived data from an earlier version (not older than three previous versions):

There are two ways to convert the data to the current version:

  • Import the project backups created and archived using the
    Services application -> Data Backup -> Import -> Projects.
    After importing the projects, convert them by opening each project once.
  • Import the backups archived using the
    Services application -> File -> Restore documents of any version to &apos;...\Extern&apos;.
    The data are written to the external path.
    You can now process the converted data in ProjectPilot.



2. Archived data from an older Allplan version (older than three previous versions):

  • See whether you can use the approach described in step 1 to import the old projects.
  • If available, it is a good idea to install an old Allplan version. Import the backups created and archived into this old version and convert the projects using the Services application. If you have imported a complete project backup, convert the data by opening each project once. When finished, repeat this process with a newer version (up to three versions later) until the data are up-to-date.
  • If an old Allplan version is not available, you can also have the data converted by Allplan. Please note that this service is not free of charge. Please contact Technical Support -> support.de@allplan.com.




Notes:

  • You can convert the data of all projects at once. Read the following FAQ in Allplan Connect: https://connect.allplan.com/en/faqid/20090408124904.html
  • If enough hard disk space is available, you are advised to keep and maintain the projects so that Allplan automatically converts them to the current version whenever you upgrade.
  • If there are project-specific smart symbol catalogs, you should open the smart symbol catalog once to convert the data.
Загрузка PDF  FAQ_EN_Transferring_data_from_old_Allplan_versions_....
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 17.06.2021 11:15

Question:

During installation of license server the message appears &apos;installation failed&apos;. What could be the reason for it?



Answer:

Check the following points:

  • The license server must be installed in a 64 bit windows system. License server is not working on 32 bit system.
  • Make sure the license server setup is saved local on the machine and is not executed over network
  • Stop the real time check of your virus scanner or stop the virus scanner complete during installation. Optionally stop the firewall as well - attention in most cases you have to reboot the server in order to take over the settings.
  • Run the *.exe file over context menu -> run as administrator.
  • If the license server installation still fails. The reason could be NET framework. License server uses NET framework 4.6 and in newer version 4.7. If there are components missing the setup will automatically try to install them. This happens in the background. It will be connected to webpage of Microsoft http://go.microsoft.com/fwlink/?LinkId=397708 and the missing files will be downloaded and installed. If a proxy server is blocking this page the download cannot happen and the license server installation fails. In these cases you will have to configure the proxy server settings to allow the Microsoft URL. Microsoft URL has to be trustworthy. Start installation of license server again.



Addition for license server 2017 on older sever like 2008 R2 server:

If the license server installation still fails and the setup stays at 50%, then the reason is usually .NET framework.
Try to install the .NET version in advance from Microsoft Download.


Installation of. NET framework 4.6 requires at least Windows Server 2008 R2 with SP 1.
For information, also see the following link: https://www.microsoft.com/de-de/download/details.aspx?id=49982


If the installation of the new version keeps failing, try to install a slightly older license server.
It will works the same way with ALLPLAN 2017 but still is operating with .NET 4.5.2.
Use the following link:
ftp://nemhotline: ha37jvg8f @ftp.nemetschek.de/download/Allgemein/Archiv/WiBu/Lizenzserver
Download the License server until 2017-0.

Note:

After successfully installation of license server you will have to connect via internet again in order to activate the license. If using proxy allow the access of the following URLs as well.

https://lc.codemeter.com/59885/gateways/getLicenses.php

https://lc.codemeter.com/59885/gateways/getTicketInformation.php

Загрузка PDF  FAQ_EN_License_server_installation_failed.pdf
Версия:  Allplan 2021 / Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Последнее изменение: 17.06.2021 11:10

Question:

How can I fix Allplan program data?


Answer:

You can fix Allplan program data by renaming the program folders and installing an update.
Due to the new names, Allplan cannot find the resources during the update. Consequently, it creates new resources.

To fix Allplan program data, do the following:

You need the latest installation package for your version.
You can download this package from Allplan Connect (www.connect.allplan.com)
Copy the zip file to the local computer and unzip the file.

  • Open the Services application of the Allplan version you want to fix.
  • Select Service -> Windows Explorer -> CAD program folder.
  • Rename the "PRG" folder "PRG_OLD". If Windows Explorer tells you that a file is still in use, restart the computer and try again.
  • Start the *.exe file of the installation package you just unzipped.
  • Select "Update installation".
  • When Setup prompts you for the license, select "Current license file" or "Use active license".
  • Select "Minimum" for the Setup type.



Allplan gets new program resources during installation.
As soon as the installation is complete, you can test how Allplan behaves.


Note:

If you are not sure, give these instructions to your system administrator.
Keep in mind that you install the version of the installation package you downloaded. This means that you may have to reinstall any subsequent hotfixes.

Загрузка PDF  FAQ_EN_Fixing_Allplan.pdf
Версия:  Allplan 2018 / Allplan 2017 / Allplan 2016 / Allplan 2015  | Последнее изменение: 28.07.2021

Question:

How can I copy bar reinforcement including views and sections created with the tools in the "Associative Views" module if, for example, I want to use slab reinforcement for another floor?
I want to place the copied reinforcement and the views in new, separate drawing files and then adjust the reinforcement, keeping the layout of the copied sections. Only the changes in the copied reinforcement should automatically be added to the sections.


Answer:

First, open ProjectPilot (File -> ProjectPilot) and copy the drawing files with the reinforcement and the drawing file with the associative views and sections to new drawing files. ProjectPilot asks you whether you want to copy the linked drawing files as well. Click No.

If there are views or sections containing only data you do not want to move (for example, only model data), select Create -> Engineering Views, Details -> Associative Views -> Add to Viewand add the data you want to move (for example, reinforcement) to these views or sections. You can remove the data later.


The copied drawing files still reference the original drawing files. The next step is to delete those references.

To do this, open the drawing files you just copied. Select Change -> Engineering Views, Details -> Associative Views -> Manage Reference Drawing Filesand remove the references to the source drawing files.



When you have removed all links to drawing files you do not want to move, select the new drawing files with the views and the reinforcement.


Select all data by pressing <CTRL>+A and move the data as you need.
You can move the data in the X, Y and Z directions in plan or define any spatial displacement in isometric view.

You can then add the associated model data to the views and adjust the reinforcement.

Note:

Once deleted, you cannot restore any references to drawing files. Therefore, make sure you delete the right references. Allplan deletes empty views or sections automatically.

Загрузка PDF  FAQ_EN_Copying_reinforcement_with_associative_views_...
Версия:  Allplan  | Последнее изменение: 17.06.2021 11:23

Question:

I want to switch to Windows 10 (64-bit). What do I need to know?


Answer:

Depending on the initial situation, keep in mind the following points.

Windows 8.1 to Windows 10:

You work with Allplan 2016 or later.
Wibu:
Changing the operating system should not affect the protection system. However, we nevertheless recommend that you return the license of the computer before you switch to Windows 10. Reactivate the license afterwards.
You can find a description of the steps at:


https://connect.allplan.com/en/faqid/20150821083335.html

You work with Allplan 2015 or an older version.
Softlock:
Allplan is protected by Softlock. Fix Softlock License Manager as descr

ibed in the following document:<BR />

https://connect.allplan.com/en/faqid/20131024085525.html

<img src="data:image/png;base64,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">

Hardlock:
If Allplan does not accept the hardlock after the switch, reinstall the hardlock driver. You can find a description of the steps at:
https://connect.allplan.com/en/faqid/20131028125253.html



Windows 7 to Windows 10:

You work with Allplan 2016 or later.
Wibu:
You must return the license of the computer before you switch to Windows 10. Reactivate the license afterwards. You can find a description of the steps at:
https://connect.allplan.com/en/faqid/20150821083335.html

You work with Allplan 2015 or an older version.
Softlock:
As this switch changes all system components, you must keep in mind the following points. Return the license to us before you switch to the new operating system. You can find a description of the steps at:

https://connect.allplan.com/en/faqid/20150821084653.html

<img src="data:image/png;base64,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">
After the switch fix Softlock License Manager as described in the following document: https://connect.allplan.com/en/faqid/0001cc7e.html

Hardlock:
If Allplan does not accept the hardlock after the switch, reinstall the hardlock driver. You can find a description of the steps at:
https://connect.allplan.com/en/faqid/20131028125253.html



Note:
Allplan 2015-1-10 and later versions are running on Windows 10.
Allplan 2016-0-2 and later versions are running on Windows 10.
We cannot say whether earlier Allplan versions are compatible with Windows 10.
Загрузка PDF  FAQ_EN_Switching_the_operating_system_to_Windows_10_...
Версия:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011 / Allplan 2009  | Последнее изменение: 28.09.2021 15:32

Question:

I have received a license for my dongle. How can I install this license?



Solution:

1. License on hard disk (or network drive)
Copy the license files to any folder, for example, C:\License, and select this folder when you install the license.

a. During setup
While installing Allplan, select the &apos;License file from any folder&apos; option and choose the folder with the license files.

b. Installing a license later
To install the license, select
Services application -> Utilities -> License -> Install HARDLOCK License
A dialog box appears. Select the folder with the license files.

2. License by email
If you have received the license by email, save the attachment to any folder, for example, C:\License, and proceed as described in step 1.
If the licenses are compressed (*.zip), extract them first using an appropriate program, such as Winzip (www.winzip.de).

3. License on storage medium (CD or USB stick)
You can also copy the license files to a storage medium (USB stick, for example) or write them to a CD and then proceed as described in step 1b.



Notes:

  • If you have received a license for a license server, read the instructions in the documents for the license server. If any questions arise, contact technical support.
  • Keep the license in a safe place as you may need it for future installations or if there are problems.
  • Make sure you install the license that is appropriate to the dongle you use, as each license matches only a single dongle. time.
  • Setup needs to access the license file(s) during the entire installation process. It is therefore not possible to read the license file(s) from a CD and then remove this CD during installation. You are advised to copy the license file(s) to a folder on the hard disk.
Загрузка PDF  FAQ_EN_Installing_license_for_dongle.pdf
1 - 6 (6)
  • 1
https://campus.allplan.com/ uses cookies  -  More information

Accept