Search Result

1 - 8 (8)
  • 1
Version:  Allplan 2019 / Allplan 2018 / Allplan 2017  | Last modified: 08.05.2019
1 user(s) found this FAQ helpful

Question:

ProjectPilot does not open, displaying the following error message:
“Unable to create ProjectPilot control. Is the registry correct?” What can I do?



Answer:

Step 1
Start the Services application -> Service -> Windows Explorer -> CAD program folder.
Open the "PRG" folder.
Find the following file: "NemProjectPilot10.exe"
Right-click this file -> select "Run as administrator" on the shortcut menu.
Try to start ProjectPilot from Allplan.
If ProjectPilot does still not start, go to step 2.


Step 2
Check whether updating the software of the virus scanner solves the problem.
If it doesn't, configure the real-time scanner of the virus scanner so that
it no longer scans the program folder and data folder of Allplan.
Start the Services application: Make a note of the following paths displayed in the Services application window:
Program folder
General program data
Central file storage folder
Define these folders as exemptions in your virus scanner.
If ProjectPilot does still not start, go to step 3.



Step 3
This problem is often caused by an "external path" that no longer exists. When you start ProjectPilot,
the program tries to access the "external path", which is stored in the Windows Registry.
If this path no longer exists, you will see the above error message.

To correct this error, do the following:

  • Start the Services application -> Service -> Windows Explorer -> My own CAD documents (USR).
  • Find the "extern.cfg"file in the user folder and delete this file.


If ProjectPilot does still not start, go to step 4.



Step 4 (Windows 10 or later)
Open the PRG folder of Allplan in Windows Explorer (for example, C:\Programs\Allplan\Allplan 2018\prg).
Start the Services application. The folder you selected for the Allplan program during installation is displayed directly in the Services application window.
Right-click the "NemProjectPilot10.exe" file in the Allplan program folder. A shortcut menu opens. Click “Properties”.
Open the “Compatibility” tab and select the “Disable fullscreen optimizations” option. After having selected this check box, click “Apply” at bottom right.




If several users with different user profiles use Allplan on this computer, click the “Change settings for all users” button first. Then, disable fullscreen optimizations as described above.




If ProjectPilot does still not start, go to step 5.



Step 5
Fix Allplan.
To find out how, go to
https://connect.allplan.com/en/faqid/20120917082945.html
After installation, try to start ProjectPilot.
If ProjectPilot does still not start, go to step 6.



Step 6
If ProjectPilot does still not start, the most likely cause of this problem is security software such as the virus scanner.
Remove, that is, uninstall the local virus scanner with all its services from the Allplan computer having these problems.
After this, ProjectPilot will start.
To reinstall the security software or virus scanner with its appropriate settings,
contact the support service of the software provider.

Download PDF  FAQ_EN_ProjectPilot_does_not_start.pdf
Version:  Allplan 2014 / Allplan 2013 / Allplan 2012  | Last modified: 04.01.2018
5 user(s) found this FAQ helpful

Question:

After I have updated the driver of a graphics card from the Nvidia Quadro or GeForce series, I cannot start Allplan anymore.
I can see numerous error messages. What can I do?



Answer:

Allplan no longer starts after you have installed a current driver of the Nvidia GeForce or Nvidia Quadro WHQL series.


You can solve the problem as follows:

For customers running Allplan 2014:
Install at least version 2014-1-3. This version works with the drivers mentioned above.

For customers running Allplan 2013 or an earlier version:
Start the Services application.
Select Service -> Windows Explorer -> General program data.
(Allplan 2012: Services application -> Service -> Windows Explorer (program folder))
Open the ETC folder and then the "Shaders" folder, for example, C:\ProgramData\Nemetschek\Allplan\2013\Etc\Shaders.
Find the "Postprocess.frag" file and rename it "Postprocess.OLD".
Copy the "Postprocess.frag" file, which you can find attached to this FAQ, into the "Shaders" folder.

A note on Allplan 2014-1-3:
Download this version from Allplan Connect or from the FTP server.

Allplan Connect:
https://connect.allplan.com/de/support/downloads.html

FTP server:
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/2014/CD/
Copy this link and paste it into the address bar of Windows Explorer. Then press ENTER.
This opens the folder on our FTP server.
Select the appropriate file (for example, 'DoWn-allplan2014-1-3_x64-cad.zip' for 64-bit systems) and select Edit -> Copy (Ctrl+C). (If you run the Windows 32-bit system, download the other file.)
Switch to a folder on your computer and select Edit -> Paste (Ctrl+V).
After having downloaded the file, you can decompress it and start installing it by double-clicking the exe file.
To download large files, you can also use a download client, such as Filezilla (http://filezilla-project.org/).

Download PDF  FAQ_EN_Allplan_does_not_start_after_update_of_graphi... Download Postprocess.frag
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017  | Last modified: 28.10.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

Can I "automate" the installation of Allplan?


Answer:

You can install Allplan 2017 in silent mode. This installation mode is fully automatic; you do not need to enter anything. Silent installation is particularly useful if you want to install Allplan 2017 with the same settings on a large number of workstations on a network.

Requirements for installing in silent mode:

Pay attention to the different licensing types!

Licensing for stand-alone workstations:
Make sure you have not yet activated a license on the computer where you want to record silent installation. Use the Viewer option for recording.

After having installed all computers in silent mode, you must use the Product Key to activate the license locally on each computer.
To activate the license after installation:

  • Open the 'License settings' dialog box: Services application -> Utilities -> License settings
  • Click License activationon the left.
  • Enter your Product Key.
  • Click Activate license.


Using a license server:

  • The clients take the licenses from a license server.
  • The license server is installed.
  • The license of the license server is activated.

For more information on the license server, go to https://connect.allplan.com/en/faqid/20150618084450.html
Use the Use active licenseoption for recording.

Setup writes the license settings to the %AppData%\Nemetschek\Lic3.ini file.You must distribute this file to all computers.


Some more tips:

  • Before you start installing, unzip the Allplan installation package (for example, using the 7_Zip program). Make sure this package is in a folder that can be accessed by all clients you want to install.
  • Start the command prompt for running the setup program always as a local administrator. To do this, open the shortcut menu and select "Run as administrator". Make sure you always start the command prompt from the correct folder.
  • Setup will automatically install any Microsoft components required by Allplan such as Microsoft .NET-Framework or Microsoft Report Viewer without prompting you to confirm.




Preparing to install in silent mode

To record and run silent installation, you need the installation files of Allplan 2017.
Installing in silent mode involves three steps:

Creating the log file for installing in silent mode

Start by installing Allplan 2017 with the /r option on a typical workstation. During installation, Setup automatically writes all entries to a log file named setup.iss. You can then use this file to install the program on the other workstations.

Installing in silent mode

Next, install Allplan 2017 with the /s option on all other workstations. Installation is based on the setup.iss log file you created in the first step.

Checking the installation

Finally, you should check the setup.log file, which was created automatically during setup, to see whether everything was installed correctly.

Note: When installing in silent mode, Setup usually uses the same setup.iss file to install the program on all workstations. However, you can edit some settings of the setup.iss file if you want to adjust paths. You can find more information in the help; see Adjusting the setup.iss filehttp://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#331.htm


To install Allplan in silent mode, do the following:

Install .NET 4.6
Silent setup requires you to install .NET 4.6 in advance. The reason for this is that you have to reboot the computer after installation of .NET 4.6. This reboot would interrupt silent installation.


After you have downloaded the installation files, you must unzip these files before you can use them to install in silent mode.

  • Unzip the zip file downloaded. This results in an .exe file (for example, Allplan 2017-0-5-cad.exe).
  • Then unzip this .exe file using an appropriate program (for example, 7_Zip) and save the resulting file to any folder. You can now use the command prompt to start Setup.exe for recording.



1. Sample installation:
Start by creating a record file. To do this, run setup with the settings you need. You only need to do this once.

Use the command prompt to start this installation with the "/r" option (for record):

To run the setup program, open the command prompt as a local administrator and type the following:
setup.exe /r

Setup starts and runs as usual.

Stand-alone license:
When you are prompted to choose the license configuration, select the Use vieweroption.
License server:
When you are prompted to choose the license configuration, select the Use active licenseoption.


Setup logs the entire installation process, writing everything to the setup.iss file.

If you want, you can change the name and folder of this file:

setup.exe /r /f1<folder>:\Setup.iss
For example,
setup.exe /r /f1c:\Setup.iss
This saves the file directly to C:\.

Be careful:
There must not be any blanks between "f1" and the folder!

Copy the setup.iss file to a folder that can be accessed by all clients you want to install. It is a good idea to copy this file to the folder with the Allplan installation files.

License server:
Copy the %AppData%\Nemetschek\Lic3.inifile to the %AppData%\Nemetschek folder of every client.
If you install Allplan on a client for the first time, you must create the Nemetschek folder in %AppData% first (for example, C:\Users\Username\Appdata\Roaming\Nemetschek).


2. Silent installation:
Make sure you can access the setup.iss file.

License server:
Make sure the Lic3.ini file is in the %AppData%\Nemetschek\ folder.


Setup logs the entire installation process again, writing everything to the setup.log file. You can find this file in the same folder as the setup.iss file. With the /f2 option, you can specify a different folder and file name for the setup.log file.

To start installing Allplan in silent mode on a client, open command prompt as a local administrator and type the following:

setup.exe /s /f1<folder>:\Setup.iss /f2<folder>:\Setup.log

For example,
setup.exe /s /f1c:\Setup.iss /f2c:\Setup.log
This saves the file directly to C:\.

Check the setup.log file to see whether everything has been installed correctly. The [ResponseResult] section should return the 'ResultCode=0' value.



Note:

If you have several licenses or license servers, select the required license for each client using the Services application - Utilities - License settings.

Refer to the online help for detailed information on installing in silent mode.
http://help.allplan.com/Allplan/2017-0/1031/Allplan/index.htm#321.htm
To open the help system, press the F1 key during setup. Go to the "Contents" tab, select "Installing" and then "Installing in silent mode".

You can also find information in the help for the license settings:
Services application -> Utilities -> License settings
To open the help system, press the F1 key. Go to the "Contents" tab, select "Licensing Allplan using a license server" and then "Installing in silent mode".


Please note that we cannot provide support for this installation method.

Download PDF  FAQ_EN_Allplan_silent_installation_(Allplan_2017_and...
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Last modified: 23.09.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:
I purchased a new license and received a Product Key for Allplan. However, I work with an earlier Allplan version. How can I install and license Allplan 2015 or an earlier version despite the new license?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use Softlock (NemSLock) or hardlocks with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

For licensing earlier versions, you require the Client ID and CD Key. You can find this information in the delivery note or invoice. Instead of a temporary license, use the appropriate trial license to install Allplan 2015 or an earlier version. Then generate a registration request to license and activate the modules you purchased.

Note:
If you use a license server for which you purchased an additional license, please read the separate document or contact support.de@allplan.com. We will show you how to add the new license to the license server.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Allplan Connect:
https://connect.allplan.com/de/support/downloads.html


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Request a license registered for your computer
The trial license is valid for 30 days. It is not personalized.
Consequently, you have to enter your personal data manually when generating the registration request.
You can find the required Client ID and CD Key in the delivery note or invoice.

To generate a registration request, do the following:

Open the License Manager (Service application -> Utilities- > License -> License Manager).
Select the license entry for your seat and click 'Request license'. Please follow the instructions displayed on screen.

Note: Editing customer details requires administrator privileges. The system will issue an appropriate message. Close NemSLock License Manager and start the Services application again. To do this, click the Services desktop icon with the right mouse button and select 'Run as administrator' on the shortcut menu.


Enter the necessary details:
The Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF).

For the Client ID, enter your customer number. You can find your customer number in the letteror delivery notethat came with Allplan.
For the CD Key, enter your CD Key, which you can also find in the letter or delivery note. Make sure you use small letters and capital letters accordingly.

Note:You can find the Client ID and CD Key at top left in the delivery note. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.


Fill out all the fields. Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.
Click Next >

For the seat, change the number 94 to the license you purchased, for example, 02, 03 or 04.
Specify how to send the registration file and click Next >.

Start email program ...
The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

Save the registration file ...
The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

In addition, you can see the data that were written to the registration file.

  1. Click Finish.
  2. Click Close to exit NemSLock License Manager.

You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read.


3. Installing the license file
Shortly after we received the registration request, we will send you the final license file to the email address you specified in the registration request.
Install this license file as follows:

  • Save the license file to any folder on the hard disk.
    If the license comes as a zip file, extract it.
  • Next, install the license by double-clicking the license file ("customer#_seat.nslock").
    Confirm the dialog box.
  • As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
    Click "Install - Install license" and then "Browse..." to select the license.
    Click "Finish" to complete the installation process.
  • Your registered license is displayed in the License Manager. Clear the check box for the trial license (for example, seat 94 or 98). Make sure your registered license is the only license that is selected.




Download PDF  FAQ_EN_Installing_an_earlier_version_with_NemSLock_i...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013  | Last modified: 14.02.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

Allplan starts as a viewer. What can I do?



Answer:

Do the following:

1. The Allplan license folder contains the servcfg.nse file.

Open this folder:
Services application -> Service -> Windows Explorer -> General program data (ETC, LIC) -> License.

Delete the servcfg.nse file from this folder.

2. Install the new, appropriate license, which you can find in the attached file. Save the license to a folder on your computer and install it as follows:
Services application -> Utilities -> License -> Install HARDLOCK License

3. Check that the light indicator of the connected USB dongle (blue or white stick) is on all the time. To test it, you can connect the dongle to a different port.

4. Install the current hardlock driver if the light indicator is off.
You can find detailed instructions here:

https://connect.allplan.com/en/faqid/20131028125253.html

5. Select the Services application -> Utilities -> License -> License settings -> Licenses.
Check if "Allplan FT" is displayed in the white window on the left. If this is so, Allplan has accepted the dongle.

If this is not so, send the logmes.nse file, info.001 file and the new servcfg.nse file (license folder) to support.de@allplan.com


Download PDF  FAQ_EN_First_steps_to_solving_hardlock_license_probl...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 08.05.2019
2 user(s) found this FAQ helpful

Question:

I have installed Allplan using the temporary Softlock license ("customer#_seat_psd.nslock") and "Trial" is displayed for its status in the License Manager.
How can I register this license?



Answer:

You use License Manager to create a registration request and send it by email to register@nemetschek.de.
In response, you get a final license file. Installing this license removes the lime limit.
Below is a description of the necessary steps.



Notes:

  • Using the temporary license, you can start Allplan as a trial version. You can work with Allplan without any restrictions for 30 days.
    After expiration of this period, Allplan starts as a viewer only. However, you can still request and install the final license.
  • When running Windows Vista, start Nemetschek License Manager as the administrator:
    Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager
    Click "License Manager" with the right mouse button and choose "Run as administrator" on the shortcut menu.




How to proceed:

1. Request a license registered for your computer

  1. On the Windows taskbar, click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager(or Services application -> Utilities -> License -> License Manager (NemSLock)).

    When running Windows Vista, start License Manager as the system administrator: click Start - (All) Programs - Nemetschek - Nemetschek Softlock 2006 - License Manager.
    Click License Managerwith the right mouse button. On the shortcut menu, click Run as administrator.
  2. Select the seat you want to register so that it is highlighted in blue.

    Note:You can only register seats you have purchased. If you can see only seats with numbers between 90 and 99 (= trial licenses for temporary use), you first need to install the personal license for temporary use.
  3. Click License requestat top left.

    The License Request Wizardstarts. The Welcome to the license request wizarddialog box provides information on the steps that follow.
  4. Click Next >.
    The Customer detailsdialog box opens.

    Note: Editing customer details requires administrator privileges. If you do not have these privileges, you will see a corresponding message. Cancel NemSLock License Manager and start again by selecting the Run as administrator option on the shortcut menu.
  5. Enter the necessary details:

    - If the Client IDhas eight zeros (00000000) and the CD Keyhas eight capital F's (FFFFFFFF), you selected the Trial license for temporary useoption when you installed Allplan.
    In this case, install the personal license for temporary use before you create the registration request.

    - If Client IDand CD Keydo not match the numbers printed on your delivery note (for example, typing errors, small letters and capital letters mixed up), you can enter Client ID and CD Key manually.

    - Fill out all the fields.

    Make sure you enter your email address correctly, because registered licenses and replies to status queries of license will be sent to the address you specify here.

    Note:Check the entries for Client ID(customer number) and CD Key , making sure these numbers are the same as those printed on the delivery note you received from Allplan. The CD Keyusually consists of the numbers 0 to 9 and the capital letters A to F.

    Tip: You can also find these numbers in the personal license file for temporary use (*_psd.nslock). Open the license file in an editor and scroll down to the end of the file. You can then copy the license codes displayed after CUSTOMERand CDKEYto the Clipboard and paste them into the appropriate boxes.
  6. Click Next >.
  7. Select the Program, Versionand Seatand click Next >.

    Note: If the Client IDis invalid (for example, when you use a trial license) you cannot confirm the dialog box by clicking OK. Instead, you will see a corresponding message.
  8. Specify how to send the registration file and click Next >.

    Start email program ...
    The program creates and saves the register.txt file before it opens your default email program. The program automatically attaches the registration file to the email and enters register (please no spam) @ (please no spam) nemetschek.defor the address.

    Save the registration file ...
    The program creates and saves the register.txt file before it opens the folder with the registration file in Windows Explorer. Now you can use all the options provided by Windows Explorer: for example, you can attach the file to an email, copy it to a computer with Internet access and so on.

    In addition, you can see the data that were written to the registration file.
  9. Click Finish.
  10. Click Close to exit NemSLock License Manager.


You will receive a reply by email within a few minutes. This email provides information on the registration process and usually includes the registered license file.

Note: The registered license file is generated by an automated system. Consequently, any additional comments in incoming emails are not read. If you have any questions or need more information, please contact Allplan directly.



2. Install the license file

Shortly after you sent the registration request to 'register@nemetschek.de' as described in step 1, the final license file will be sent to the email address you specified in the registration request.
Install this license file as follows:

  • Save the license file to any folder on the hard disk.
    If the license comes as a zip file, extract it.
  • Next, install the license file by double-clicking it ("customer#_seat.nslock").
    Confirm the dialog box.
  • As an alternative, you can also use License Manager to install the license file (Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager).
    Click "Install - Install license" at top left in Nemetschek SoftLock License Manager and select the license by clicking "Browse...".
    Click "Finish" to complete the installation process.


Note:

Do not use the same computer to register several license files for different seats. This would connect the seats. You cannot separate the seats again without the help of technical support.

Download PDF  FAQ_EN_Nemetschek_Softlock_-_first_steps.pdf
Version:  Allplan 2020 / Allplan 2019 / Allplan 2018 / Allplan 2017 / Allplan 2016  | Last modified: 23.09.2019
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

I purchased a new license and received a Product Key for Allplan. However, I use earlier Allplan versions with NemSLock server in my office. How can I install Allplan 2015 or an earlier version despite the new license? How can I activate the license on NemSLock server?


Answer:

Allplan 2016 introduced a new protection system. Since then licensing has been based on CodeMeter by Wibu Systems AG. You can no longer use NemSLock server with Allplan. For running Allplan, you get a Product Key by email. Using this key, you can activate your license online.

This new license is not downward compatible. Consequently, you cannot use it for earlier Allplan versions.

If you want to install Allplan 2015 or an earlier version, use a trial license to install the version you need.

Downloading Allplan:
Make sure the Allplan version you install is always up-to-date. In other words, it should include the latest hotfixes and service releases.
You can download the current Allplan version from Allplan Connect or the FTP server.
Downloading from Allplan Connect:
https://connect.allplan.com/de/support/downloads.html

FTP server:
Copy this link and paste it into the address bar of Windows Explorer. Then press ENTER.
ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de
This opens the folder on our FTP server.

Go to /download/Allplan/2015/CD (choose the path in accordance with the version you need) and select the appropriate file. Then click Edit -> Copy (Ctrl+C).
Switch to a folder on your computer and select Edit -> Paste (Ctrl+V).
Extract the ZIP file. Right-click the EXE file and select "Run as administrator".
Deactivate the virus scanner during installation.


1. Install Allplan with a trial license
Install Allplan. In the 'Select License Information' dialog box, choose 'Trial license for temporary use' and select the license for 'Architecture' or 'Engineering'.

Important: If you work with Workgroup Manager, select 'Different trial license' -> 'Next'. Open the Workgroup folder for your country and select the appropriate license. Then follow the instructions and install Allplan. Make sure you enter the paths correctly.


2. Use NemSLock server to request a registered license for the new seat

If you have not used a license server until now, install the license server using the trial license for NemSLock Server.

Installing NemSLock Server

  • Start the Setup program for NemSLock Server. You can find the latest Setup program on our FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/2014/allplan2014-nemslock-lizenz.zip

  • The trial license is also on the FTP server:

ftp://nemhotline:ha37jvg8f@ftp.nemetschek.de/download/Allplan/Lizenzserver/Allplan 2015 Nemslock Server Trial.nslsrv

  • Select the trial license file for NemSLock Server. This license is valid for 30 days, but it includes only seat. The full number of seats purchased will be available to you as soon as you have installed the registered licenses (see below).
  • Select the full installation.
  • If the service does not start automatically after Setup, select Control Panel -> Administrative Tools -> Services and start the Nemslock Server 2006 service.



Registering licenses

  • Open NemSLock 2006 Server Consoleby clicking the corresponding icon on the desktop or by selecting Start -> All Programs -> NemSLock 2006 Server -> NemSLock 2006 Server Console.
  • Switch to Moduleson the left.
  • Select one of your seats.
  • Click the Registration request (register.txt)button.
  • Click Edit.
  • Fill out all fields marked with an asterisk (*). Make sure you enter your email address correctly, because the registered license file will be sent to this address (and not to the address of the person who sent the registration request!). Click OKto confirm.
  • Click Create registration request. Windows Explorer opens and shows the register.txt file.
    If you have closed Windows Explorer, you can find the file in the program folder of NemSLock Server. If you installed the program to the path proposed, the path is
    C:\Program Files (x86)\Nemetschek\NemSLock Server 2006\Programs\License.
  • Use an editor to open the new register.txt file.

You can find the entry for your seat in line @23@seat:. Change it and enter your new seat number instead. For example, if you purchased seat 08, change the entry to @23@seat: 08. Save the file.

  • You can now use all the options provided by Windows Explorer to copy the registration file to a computer with Internet connection. You can do this on the network or you can use a USB stick. You can then email the file to us.
  • Send the email with the registration request to register@nemetschek.de.
  • You will promptly receive your registered license for the new seat.



Installing licenses
Exit Allplan on all workstations.

  • Open NemSLock 2006 Server Console.
  • Click Stop serveron the left.
  • Switch to Moduleson the left.
  • Click Browse and select the registered license file.
  • Click Install license file.
  • After this, you can start the server again by clicking Start server.



Note:

If you purchased several new licenses, you have to generate and send a separate registration request for each seat. Just repeat the steps described above. You will then receive a registered license file for each seat. You must install each file.

Download PDF  FAQ_EN_Installing_an_earlier_version_with_NemSLock_s...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011 / Allplan 2009  | Last modified: 11.07.2016
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

I have received a license for my dongle. How can I install this license?



Solution:

1. License on hard disk (or network drive)
Copy the license files to any folder, for example, C:\License, and select this folder when you install the license.

a. During setup
While installing Allplan, select the &apos;License file from any folder&apos; option and choose the folder with the license files.

b. Installing a license later
To install the license, select
Services application -> Utilities -> License -> Install HARDLOCK License
A dialog box appears. Select the folder with the license files.

2. License by email
If you have received the license by email, save the attachment to any folder, for example, C:\License, and proceed as described in step 1.
If the licenses are compressed (*.zip), extract them first using an appropriate program, such as Winzip (www.winzip.de).

3. License on storage medium (CD or USB stick)
You can also copy the license files to a storage medium (USB stick, for example) or write them to a CD and then proceed as described in step 1b.



Notes:

  • If you have received a license for a license server, read the instructions in the documents for the license server. If any questions arise, contact technical support.
  • Keep the license in a safe place as you may need it for future installations or if there are problems.
  • Make sure you install the license that is appropriate to the dongle you use, as each license matches only a single dongle. time.
  • Setup needs to access the license file(s) during the entire installation process. It is therefore not possible to read the license file(s) from a CD and then remove this CD during installation. You are advised to copy the license file(s) to a folder on the hard disk.
Download PDF  FAQ_EN_Installing_license_for_dongle.pdf
1 - 8 (8)
  • 1
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
https://campus.allplan.com/ uses cookies  -  More information

Accept