Search Result

1 - 3 (3)
  • 1
Version:  Allplan 2019 / Allplan 2018 / Allplan 2017  | Last modified: 19.10.2018
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I temporarily borrow a license for a client from the license server?



Answer:

To borrow a license, do the following:

Notes:
You cannot borrow licenses on the license server. You can do this only at the clients.
You can only borrow and return a license if the client is connected with the license server.
Computers that are not on the company network must use a VPN connection to access the server.

At the client:

  • Open the 'License settings' dialog box: Services application -> Utilities -> License settings.
  • Click License selectionon the left. Then click the license you want to borrow so that this license is highlighted in blue.
  • If this license is a license server license, the Todayand Borrowbuttons in the 'Borrow license for:' area are no longer grayed out.
  • The Todaybutton always shows the preset period of time. The default setting is Today. If you want to change the period of time, click the Todaybutton. You can then choose from various options.
    Note: When you select 'Today', the license will be available again for all Allplan users on the server tomorrow.
    When you select a number of days, borrowing will always be valid for 24 hours. For example, you borrow a license for 1 day and borrowing starts at 3 o'clock in the afternoon, the license will not be available on the server until 3 o'clock in the afternoon. The same applies to selecting days on the calendar.
  • After having specified the correct period, click Borrowto borrow the license at once.


You can immediately see the borrowed license in the license selection below your computer name. Click the green information button to get details about this license. For example, you can see when the borrowed license will automatically be returned to the server.

  • If you want to return the license to the server before the time period expires, click the license again so that it is highlighted in blue. The Return licensebutton is now available. Click Return licenseto immediately return the selected license to the server.
Download PDF  FAQ_EN_License_server_-_borrowing_licenses_temporari...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 08.05.2019
1 user(s) found this FAQ helpful

Question:

I would like to run the program on a different computer. How can I transfer the NemSLock license?



Information:

You can use the "Export/import - license transfer" tool to transfer an Allplan license temporarily from the registered computer to a different computer (a laptop, for example).
Licenses are always transferred between two specific computers. When you export the license from the source computer, you need to precisely specify the destination computer to which the license is to be transferred. A registered, running Allplan version must be installed on the source computer. At least a trial version of Allplan must be installed on the destination computer. Whether this trial version is still valid or has already expired is irrelevant.



Note:

The license should notbe transferred temporarily when you have bought a new computer and you want to run the program permanently on this new computer. The temporary license transfer is limited to 30 days. For more information please consult the online Help.


Answer:

Open the Services application -> Utilities -> License -> License Manager (NemSLock).

Select theExport/import - license transfertool.

You can choose between a transfer that is "Directly on the network" and one that is "Indirectly by transfer file". The direct transfer requires that the source computer and the destination computer are connected via a network. As opposed to the indirect transfer, you can also exchange licenses when you opt for the direct transfer.


A. Transferring the license directly

Preparing the destination computer for the license import

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import licenseoption.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Using the source computer to export the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Export license option. Enter the computer name or IP address of the destination computer. For the time limit, specify after how many days the license file is to be available at the source computer again. This will happen automatically as soon as this period expires.
  5. Click Finish.


Returning the license file to the source computer before the time limit expires

Source computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the (Re-)Import license option. The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.


Destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select the Return license option. The "Return License" dialog box appears.
  5. Enter the name or IP address of the computer to which you want to return the license and click Return. A message appears announcing that the license has been exported to the destination computer.
  6. At each computer, clickOKto confirm.



B. Exchanging licenses while online

Specify which computer is to be the master and which computer is to have a subordinate role (slave).

Preparing the slave for the license exchange

  1. At one of the two computers, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Select the "Nemetschek Softlock License Manager" tab. Click the Export/import - license transfericon at the top.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses -> Slave.The computer name and IP address are displayed in a dialog box. You require one of these pieces of information to start the online transfer at the source computer.
  5. Click Reception.



Exchanging license using the master

  1. Using the other computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top. The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Exchange licenses-> Master. Enter the computer name or IP address of the slave. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  5. Click Finish.


Returning the exchanged licenses before the time limit expires

  1. Using the slave, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  3. Select Directly on the network.
  4. Select Reverse license exchange -> Slave -> Reception.
  5. Using the master, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  6. Click Export/import - license transfer.The "License Transfer Wizard" dialog box opens.
  7. Select Directly on the network.
  8. Select Reverse license exchange -> Master. Check whether the proposed computer name or IP address of the slave is correct.
  9. Click Reverse.



C. Exchanging licenses while offline


Creating computer ID files for the source and destination computers

First you need to create two computer-specific ID files: one for the source computer and one for the destination computer. These files are valid until you change the hardware of the corresponding computer. If the hardware changes (adding a hard disk or a DVD/CD drive, for example), you need to create a new computer ID file.

To create a computer-specific ID file:

  1. Start the Nemetschek License Manager by clicking Start -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click the Export/import - license transfericon at the top and select Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select Create computer ID file.
  4. Click Browse...and specify the path where you want to save the computer ID file.
  5. Click Finish.


Note:

The folder you select must exist. The computer-specific COMPUTERNAME.nslid file is created in this folder.
If the source computer and the destination computer are connected on the network, you can specify the source and destination paths over the network without having to use storage media or email attachments.

Exporting the license file for the destination computer

  1. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Export license option. The Import Computer IDdialog box is displayed.
  4. To export the license for a specific destination computer, do the following: Click Browse..., and select the computer ID file of the destination computer (name_of_destination_computer.nslid) and clickOpen. Click Next.
  5. For the time limit, specify after how many days the license file is automatically returned to the source computer.
  6. Click Create License Transfer Fileand clickOKto confirm. A file (name_of_destination_computer_date_time.NslTransfer) is created for the destination computer.


As soon as you have exported the license, Allplan no longer starts on the source computer.

Importing the license file into the destination computer

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. At the top click Export/import - license transfer -> Indirectly by transfer file.The "License Transfer" dialog box is displayed.
  3. Select the (Re-)Import license option. Click Browse....and select the license file you want to import. Click Open.
  4. Click Import and clickOKto confirm.



Note:

Each license file can be imported just once. For this reason, the file name is preceded by the word "used_" after the import.

Returning the license file to the source computer before the time limit expires

  1. Using the destination computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  2. Click Export/import - license transfer -> Indirectly by transfer file.The "Offline License Transfer" dialog box is displayed.
  3. Select the Return license option.
  4. Click Browse...and select the path where you want to save the license file returned. Then click OKto confirm.
  5. Click Return and clickOKto confirm.
  6. Using the source computer, start the Nemetschek License Manager by clickingStart -> (All) Programs -> Nemetschek -> Nemetschek SoftLock 2006 -> License Manager.
  7. Select the "Nemetschek Softlock License Manager" tab. Click License transfer -> Offline license transfer. The "Offline License Transfer" dialog box is displayed.
  8. Select the (Re-)Import license option.
  9. Click Browse...and select the corresponding license file. Then click Open.
  10. Click Import and clickOKto confirm.
Download PDF  FAQ_EN_Transferring_NemSLock_licenses_temporarily_(i...
Version:  Allplan 2015 / Allplan 2014 / Allplan 2013 / Allplan 2012 / Allplan 2011  | Last modified: 11.07.2016
Not voted yet. Be the first to vote this FAQ as helpful!

Question:

How can I temporarily transfer the NemSLock license of a registered computer to a different computer?
How can I interchange the NemSLock licenses of two registered computers?



Answer:

You can use Nemetschek's Softlock License Manager to transfer the license temporarily (up to 30 days) to a different computer. Of course, you can return the license to the original computer before this time limit expires.

Open the License Manager by selecting the Services application -> Utilities -> License -> License Manager (NemSLock).
Select Export/import - License transfer

You can choose between a transfer that is "Directly on the network" and one that is "Indirectly by transfer file". The direct transfer requires that the source computer and the destination computer are on the same network. As opposed to the indirect transfer, you can also exchange licenses when you opt for the direct transfer.


Direct license transfer
First, set the destination computer to reception mode by selecting Directly on the network -> (Re-)Import license-> Selection.
Now you can transfer the license form the source computer to the destination computer using Directly on the network -> Export license -> Transfer.
Detailed information on this topic is provided in the Help (press F1).

Direct license exchange
You can use this option to exchange the licenses of two computers temporarily. This is very useful if the licenses of these two computers contain different program configurations.
Specify which computer is to be the master and which computer is to serve as the slave.
At the computer that is to serve as the slave, select Directly on the network -> Exchange licenses -> Slave and set it to Reception.
At the computer that is to serve as the master, click Directly on the network-> Exchange licenses -> Master.
Detailed information on this topic is provided in the Help (press F1).

Offline license transfer
You can also transfer the license to a computer that is not on the network.
To do this, select Indirectly by transfer file.
This requires that you create a computer-specific Computer IDof the destination computer. You only need to do this once. The next step is to export the license file for the specific computer ID on the source computer. You can use an USB stick to transfer the exported license to the other computer. You can also send it by email. Finally, install the license on the destination computer.
Detailed information on this topic is provided in the Help (press F1).



Notes:

  • If you have a new computer where you want to use the license permanently, use the Relocate licenses -> Transfer licenses permanently to a computertool .
    In this case, the license is returned to Nemetschek and you receive a registered license for the new computer. Follow this link for detailed instructions: https://connect.allplan.com/de/faqid/0003f5ca.html
Download PDF  FAQ_EN_Transferring_NemSLock_licenses_temporarily_(o...
1 - 3 (3)
  • 1
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
https://campus.allplan.com/ uses cookies  -  More information

Accept